|
|
|
| Advertisements | |
|
|
|
|
#2
04-23-2000, 10:47 PM
|
|||
|
|||
|
I have no idea what you're talking about.
Does that mean I'm not a geek? Congratulations, anyway!  ------------------ Cristi, Slayer of Peeps I made my husband join a bridge club. He jumps next Tuesday. (title & sig courtesy of UncleBeer and WallyM7!) 
|
|
#3
04-23-2000, 10:51 PM
|
|||
|
|||
|
You are not a geek until you fully screw up your machine via the BIOS and are able to fix it even though you have no idea WTH you did.
Then you are a geek. But proud that you could accomplish what you did
|
|
#5
04-23-2000, 10:51 PM
|
|||
|
|||
|
Quote:
I usually only have to do that when I REALLY screw things up...
|
|
#6
04-23-2000, 10:54 PM
|
|||
|
|||
|
No, Inky, having that many posts doesn't make me a geek. It just means I have no life.
------------------ Cristi, Slayer of Peeps I made my husband join a bridge club. He jumps next Tuesday. (title & sig courtesy of UncleBeer and WallyM7!)
|
|
#7
04-24-2000, 12:57 AM
|
|||
|
|||
|
Congratulations on passing Stage One of your geek training, concrete.
For Stage Two, get a bootable 5.25" diskette (say, from an old copy of DOS or OS/2 you have lying around), copy it onto a 3.5" diskette, and make the 3.5" diskette boot properly. This will require a binary disk sector editor, such as the Norton Utilities, so that you can alter the boot sector (sector 0, track 0, side 0) of the 3.5" disk. HINT: There first 3 bytes of the boot sector are a JMP instruction, but the next 20 or so bytes after that are a bunch of codes for the size of the disk, the number of sectors per track, etc. (i.e. not all of the boot sector is real-mode machine instructions). You'll have to look up the right couple of byte codes to alter and how to alter them in a low-level programming or O/S book, perhaps from the old Peter Norton publishing line.
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
