# An angle of the WTC collapse I'd never seen

**URL:** <https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182>\
**Category:** Great Debates\
**Created:** [July 19, 2010, 1:39am UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182 "2010-07-19T01:39:32Z")\
**Posts on this page:** 20\
**Page:** 10

<div class="post-metadata">

**Author:** ![Valgard](https://avatars.discourse-cdn.com/v4/letter/v/7feea3/32.png) [@Valgard](https://boards.straightdope.com/u/Valgard)\
**Post date:** [July 22, 2010, 4:42pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/181 "2010-07-22T16:42:26Z")

</div>

> [@psikeyhackr](#):
>
> In order for the north tower to come down in less than 18 seconds it had to have an average acceleration of more than 50% of g.
> 
> So why don’t we have a table specifying the tons of steel and tons of concrete that were on every level by now? It is certainly curios that the nation that put men on the Moon can’t provide that info in almost nine years on structures designed before the Moon landing.
> 
> The NCSTAR1 report does not even specify the total for the concrete in the towers even though the steel is specified in 3 places. If mass A hits mass B isn’t it rational to expect complete data on mass B if a LOGICAL analysis is expected?
> 
> psik

Welcome back. As I recall you participated in (and perhaps even started) a thread on this exact same subject months ago, complete with questions about the “exact distribution of concrete and steel” and videos of a bit of dowel with some washers on it which were supposed to accurately model the behavior of a couple of 1000+ foot tall skyscrapers. I can’t find the thread but the questions were thoroughly answered. Perhaps someone with better search skills (or with the time to wade through some of the WTC threads with 25+ pages of posts) can throw the links up.

As with **Ivan Astikov** ’s questions wouldn’t it be far simpler to refer back to the previous discussions with their excruciatingly detailed responses and if there’s actually something new to discuss to raise those points? Otherwise we just wind up responding to the same question with the same factual answer every so often - not that you necessarily said this but something along the lines of “Steel doesn’t melt at 1000F” doesn’t change the 17th time somebody asks about it.

ETA - Ah, I see that you just reposted your youtube video of your model which is nifty if you’re discussing how that model behaves but has little to do with how a building behaves.

---

<div class="post-metadata">

**Author:** ![GIGObuster](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/gigobuster/32/421_2.png) [@GIGObuster](https://boards.straightdope.com/u/GIGObuster)\
**Post date:** [July 22, 2010, 4:51pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/182 "2010-07-22T16:51:56Z")

</div>

> [@psikeyhackr](#):
>
> I never said anything about explosions controlled or otherwise.

I also did mention the most likely reasons why did they fall.

> [@psikeyhackr](#):
>
> But the falling portion of my model that arrested did not remain intact. The bottom was crushed like the top of the stationary portion which makes perfect sense according to Newton’s 3rd Law. Crushing the paper loops requires energy and the onlysource is the kinetic energy of the falling mass. So it slows down. Bazant is talking nonsense. So how has he been allowed to talk nonsense for so long?
> 
> psik

Here is where one has to point out:

**It is your fault.**

You and many of your like minded researchers had several years to make a paper to rebut that “nonsense”. Showing a model in YouTube is not science.

Ans so, as time goes by, one has to conclude that you only have your say so. And high school level models…

---

<div class="post-metadata">

**Author:** ![Lemur866](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/lemur866/32/434_2.png) [@Lemur866](https://boards.straightdope.com/u/Lemur866)\
**Post date:** [July 22, 2010, 5:07pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/183 "2010-07-22T17:07:22Z")

</div>

Arg. Not the models again.

Let me explain. Cube, square. That is, a material’s weight increases by volume, which is length x height x width. But a material’s strength increases with cross-sectional area, or width x length.

So if you have a block of a material, the strength of the block changes with the size of the block, it does not remain constant. If you have a block that is 1 ft x 1 ft x 1 ft, it has a certain strength. If you make a block that is 2 ft x 2 ft x 2 ft, that block is 4 times as strong, but 8 times heavier. See how that math works? That means the larger block has half the strength of the small block. And this is why you can build a model of a skyscraper with tinkertoys, but you can’t build a real skyscraper with giant tinkertoys. And tests against the model skyscraper will give different results than if you ran the same tests against the real skyscraper.

---

<div class="post-metadata">

**Author:** ![psikeyhackr](https://avatars.discourse-cdn.com/v4/letter/p/97f17d/32.png) [@psikeyhackr](https://boards.straightdope.com/u/psikeyhackr)\
**Post date:** [July 22, 2010, 6:24pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/184 "2010-07-22T18:24:46Z")

</div>

> [@Garfield226](#):
>
> It’s too bad they didn’t build the towers out of washers and paper, then they wouldn’t have collapsed entirely. If only you’d been there to tell them how to do it…
> 
> Next you can put an egg in a peanut butter jar filled with cotton balls, throw it at a wall and when the egg doesn’t break claim that all the car accident deaths are caused by sudden heart attacks.

What a brilliant response!

If a perfect 1/100th scale model of the WTC was constructed then it would be 13.6 feet tall. The 36 ft box columns would be 4 inches long. But because of the inverse square law it would be 10,000 times as strong in proportion to its mass as the real building. It could not possibly collapse.

So any small physical collapse simulation would have to be constructed of different materials to reproduce what SHOULD HAVE HAPPENED in a true collapse.

What could I use weaker than paper but strong enough to support the weight? The washers are 1.7 oz. The total weight is 3.5 lb. The top 11 loops are singles, the next 17 are doubles and the bottom 5 are triples. The entire model can be built for less than $30 and it can be redone as many times as the experimenter wants to make paper loops.

I guess it is too difficult for our engineering schools, including the one I attended.

But it cannot be made more accurate if the distribution of mass of the towers is not correct. I am certainly not going to believe we have correct info if we haven’t even been told the weight of a standard floor assembly. There were 84 of them in each tower.

psik

---

<div class="post-metadata">

**Author:** ![Cisco](https://avatars.discourse-cdn.com/v4/letter/c/ccd318/32.png) [@Cisco](https://boards.straightdope.com/u/Cisco)\
**Post date:** [July 22, 2010, 6:36pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/185 "2010-07-22T18:36:23Z")

</div>

> [@psikeyhackr](#):
>
> What a brilliant response!
> 
> If a perfect 1/100th scale model of the WTC was constructed then it would be 13.6 feet tall. The 36 ft box columns would be 4 inches long. But because of the inverse square law it would be 10,000 times as strong in proportion to its mass as the real building. It could not possibly collapse.
> 
> So any small physical collapse simulation would have to be constructed of different materials to reproduce what SHOULD HAVE HAPPENED in a true collapse.
> 
> What could I use weaker than paper but strong enough to support the weight? The washers are 1.7 oz. The total weight is 3.5 lb. The top 11 loops are singles, the next 17 are doubles and the bottom 5 are triples. The entire model can be built for less than $30 and it can be redone as many times as the experimenter wants to make paper loops.
> 
> I guess it is too difficult for our engineering schools, including the one I attended.
> 
> But it cannot be made more accurate if the distribution of mass of the towers is not correct. I am certainly not going to believe we have correct info if we haven’t even been told the weight of a standard floor assembly. There were 84 of them in each tower.
> 
> psik

I’d like to invite you all to refer back to post #s 161 and 168.

When you’re done laughing, of course.

---

<div class="post-metadata">

**Author:** ![begbert2](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/begbert2/32/3357_2.png) [@begbert2](https://boards.straightdope.com/u/begbert2)\
**Post date:** [July 22, 2010, 6:40pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/186 "2010-07-22T18:40:29Z")

</div>

> [@psikeyhackr](#):
>
> What a brilliant response!
> 
> If a perfect 1/100th scale model of the WTC was constructed then it would be 13.6 feet tall. The 36 ft box columns would be 4 inches long. But because of the inverse square law it would be 10,000 times as strong in proportion to its mass as the real building. It could not possibly collapse.
> 
> So any small physical collapse simulation would have to be constructed of different materials to reproduce what SHOULD HAVE HAPPENED in a true collapse.
> 
> What could I use weaker than paper but strong enough to support the weight? The washers are 1.7 oz. The total weight is 3.5 lb. The top 11 loops are singles, the next 17 are doubles and the bottom 5 are triples.

You need to replicate the arrangement and attachment of the beams to solve the strength-with-weaker-materials problem. That’s the whole point of architecture - overcoming weakenesses in the materials by clever arrangement thereof. So get started - and don’t forget the 1/100th scale rivets.

And rememember, as you’re collecting your 1/10000 strengh material analogues for steel, concrete, plaster, wood, etc - that these materials _also_ need to alter in rigidity and strengh in a manner analogous to the original materials when set on 1/100th scale fire.

> [@psikeyhackr](#):
>
> The entire model can be built for less than $30 and it can be redone as many times as the experimenter wants to make paper loops.

It’s utterly and completely inaccurate and completely worthless as a model of the collapse, but at least it’s cheap!

> [@psikeyhackr](#):
>
> I guess it is too difficult for our engineering schools, including the one I attended.

Not without computer models, anyway - but it’s understandable. 1/100th scale materials are notoriously rare.

> [@psikeyhackr](#):
>
> But it cannot be made more accurate if the distribution of mass of the towers is not correct. I am certainly not going to believe we have correct info if we haven’t even been told the weight of a standard floor assembly. There were 84 of them in each tower.

Similarly, you cannot even be confident that the towers even collapsed, without those precise measurements. After all, what if it turns out the floors were too light/heavy/both after all? Then clearly the towers must still be standing - or at least it’s impossible to be absolutely sure they aren’t, due to the uncertainty introduced by the unknown floor weights.

Also, was there, or was there not, a rubber duckie in the lav on the 44th floor, and if so, how much did it weigh? The unknowns here are innumerable and of staggering import.

---

<div class="post-metadata">

**Author:** ![begbert2](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/begbert2/32/3357_2.png) [@begbert2](https://boards.straightdope.com/u/begbert2)\
**Post date:** [July 22, 2010, 6:41pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/187 "2010-07-22T18:41:48Z")

</div>

> [@Cisco](#):
>
> I’d like to invite you all to refer back to post #s 161 and 168.
> 
> When you’re done laughing, of course.

Hey, my ego is hungry. And this is an enticing buffet.

---

<div class="post-metadata">

**Author:** ![Czarcasm](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/czarcasm/32/4050_2.png) [@Czarcasm](https://boards.straightdope.com/u/Czarcasm)\
**Post date:** [July 22, 2010, 6:45pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/188 "2010-07-22T18:45:11Z")

</div>

> [@begbert2](#):
>
> Hey, my ego is hungry. And this is an enticing buffet.

Yeah, but you’re just going to be hungry again a thread later.

---

<div class="post-metadata">

**Author:** ![begbert2](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/begbert2/32/3357_2.png) [@begbert2](https://boards.straightdope.com/u/begbert2)\
**Post date:** [July 22, 2010, 6:49pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/189 "2010-07-22T18:49:43Z")

</div>

> [@Czarcasm](#):
>
> Yeah, but you’re just going to be hungry again a thread later.

And when I am, I’m sure these guys or their ilk will be back, giving me tasty tidbits to respond to.

Okay, so I’m not perfectly noble. But I’m usually on-topic, at least.

---

<div class="post-metadata">

**Author:** ![Garfield226](https://avatars.discourse-cdn.com/v4/letter/g/9e8a1a/32.png) [@Garfield226](https://boards.straightdope.com/u/Garfield226)\
**Post date:** [July 22, 2010, 6:52pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/190 "2010-07-22T18:52:08Z")

</div>

> [@Cisco](#):
>
> I’d like to invite you all to refer back to post #s 161 and 168.
> 
> When you’re done laughing, of course.

When I was younger, friends would often tell stories that tiptoed between truth and fiction. These often were constructed so as to confuse or to get a rise out of the listener.

These stories were always ended with “[psyche](http://www.urbandictionary.com/define.php?term=psyche)!”

---

<div class="post-metadata">

**Author:** ![psikeyhackr](https://avatars.discourse-cdn.com/v4/letter/p/97f17d/32.png) [@psikeyhackr](https://boards.straightdope.com/u/psikeyhackr)\
**Post date:** [July 22, 2010, 6:54pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/191 "2010-07-22T18:54:12Z")

</div>

> [@begbert2](#):
>
> Not without computer models, anyway - but it’s understandable. 1/100th scale materials are notoriously rare.
> 
> Similarly, you cannot even be confident that the towers even collapsed, without those precise measurements. After all, what if it turns out the floors were too light/heavy/both after all? Then clearly the towers must still be standing - or at least it’s impossible to be absolutely sure they aren’t, due to the uncertainty introduced by the unknown floor weights.

The trouble with computer models is that you have to trust the math and the code and it would be extremely difficult to track down an error either deliberate or accidental. So it really comes down to trusting the people that made the computer model. Computer models are really funny when they have obvious stupd errors. Look at that Purdue simulation of the north tower impact. Skyscrapers sway in the wind. How could the plane impact without the core columns moving. The NIST hasa graph of the oscillation of the south tower due to impact but Purdue says the north tower didn’t move.

ROFLMAO

So much for computers.

My model moved.

[![](https://i.ytimg.com/vi/z0kUICwO93Q/hqdefault.jpg "WTC Impact Model - MIT") ](https://www.youtube.com/watch?v=z0kUICwO93Q)

But where has **ANYBODY** made a self supporting physical model where the top 15% can destroy the bottom 85% with a drop of less than 10% of the height. If it can’t be done then something else had to be involved in the destruction of the WTC.

psik

---

<div class="post-metadata">

**Author:** ![Garfield226](https://avatars.discourse-cdn.com/v4/letter/g/9e8a1a/32.png) [@Garfield226](https://boards.straightdope.com/u/Garfield226)\
**Post date:** [July 22, 2010, 6:55pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/192 "2010-07-22T18:55:55Z")

</div>

> [@psikeyhackr](#):
>
> psik

Indeed.

---

<div class="post-metadata">

**Author:** ![Valgard](https://avatars.discourse-cdn.com/v4/letter/v/7feea3/32.png) [@Valgard](https://boards.straightdope.com/u/Valgard)\
**Post date:** [July 22, 2010, 7:02pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/193 "2010-07-22T19:02:53Z")

</div>

> [@psikeyhackr](#):
>
> What a brilliant response!
> 
> If a perfect 1/100th scale model of the WTC was constructed then it would be 13.6 feet tall. The 36 ft box columns would be 4 inches long. But because of the inverse square law it would be 10,000 times as strong in proportion to its mass as the real building. It could not possibly collapse.
> 
> So any small physical collapse simulation would have to be constructed of different materials to reproduce what SHOULD HAVE HAPPENED in a true collapse.
> 
> What could I use weaker than paper but strong enough to support the weight? The washers are 1.7 oz. The total weight is 3.5 lb. The top 11 loops are singles, the next 17 are doubles and the bottom 5 are triples. The entire model can be built for less than $30 and it can be redone as many times as the experimenter wants to make paper loops.
> 
> I guess it is too difficult for our engineering schools, including the one I attended.
> 
> But it cannot be made more accurate if the distribution of mass of the towers is not correct. I am certainly not going to believe we have correct info if we haven’t even been told the weight of a standard floor assembly. There were 84 of them in each tower.
> 
> psik

As I recall you really danced around the “engineering school” question in the first thread where you posted your model until finally admitting that you had no actual education in structural engineering or materials science.

I’ll say the same thing now that I said then:

Your model shows how your model behaves. It does NOT show how an actual building behaves.

Do you really think that every structural engineer out there is going to look at your model, slap their head and say “My goodness, that’s how we should have been analyzing buildings all along”?

---

<div class="post-metadata">

**Author:** ![begbert2](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/begbert2/32/3357_2.png) [@begbert2](https://boards.straightdope.com/u/begbert2)\
**Post date:** [July 22, 2010, 7:05pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/194 "2010-07-22T19:05:06Z")

</div>

> [@psikeyhackr](#):
>
> But where has **ANYBODY** made a self supporting physical model where the top 15% can destroy the bottom 85% with a drop of less than 10% of the height. If it can’t be done then something else had to be involved in the destruction of the WTC.

Or alternatively it can’t be done because materials don’t scale down, and you know it. But don’t let reality stop your ranting.

---

<div class="post-metadata">

**Author:** ![Sailboat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/sailboat/32/461_2.png) [@Sailboat](https://boards.straightdope.com/u/Sailboat)\
**Post date:** [July 22, 2010, 7:05pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/195 "2010-07-22T19:05:15Z")

</div>

> [@psikeyhackr](#):
>
> But where has **ANYBODY** made a self supporting physical model where the top 15% can destroy the bottom 85% with a drop of less than 10% of the height. If it can’t be done then something else had to be involved in the destruction of the WTC.

Well, we have the real-life example where it actually happened.

---

<div class="post-metadata">

**Author:** ![Miller](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/miller/32/481_2.png) [@Miller](https://boards.straightdope.com/u/Miller)\
**Post date:** [July 22, 2010, 7:18pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/196 "2010-07-22T19:18:50Z")

</div>

> [@psikeyhackr](#):
>
> But the falling portion of my model that arrested did not remain intact. The bottom was crushed like the top of the stationary portion which makes perfect sense according to Newton’s 3rd Law. Crushing the paper loops requires energy and the onlysource is the kinetic energy of the falling mass. So it slows down. Bazant is talking nonsense. So how has he been allowed to talk nonsense for so long?

Either you’re talking nonsense, or Bazant is talking nonsense. Oddly enough, all of the people out there who actually design and build skyscrapers for a living don’t have the problem you do with Bazant. Which means you’re either the single most brilliant engineering mind on the planet, or you don’t know what you’re talking about.

---

<div class="post-metadata">

**Author:** ![Mr.Miskatonic](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/mr.miskatonic/32/310_2.png) [@Mr.Miskatonic](https://boards.straightdope.com/u/Mr.Miskatonic)\
**Post date:** [July 22, 2010, 7:20pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/197 "2010-07-22T19:20:15Z")

</div>

> [@psikeyhackr](#):
>
> The trouble with computer models is that you have to trust the math and the code and it would be extremely difficult to track down an error either deliberate or accidental. So it really comes down to trusting the people that made the computer model. Computer models are really funny when they have obvious stupd errors. Look at that Purdue simulation of the north tower impact. Skyscrapers sway in the wind. How could the plane impact without the core columns moving. The NIST hasa graph of the oscillation of the south tower due to impact but Purdue says the north tower didn’t move.
> 
> ROFLMAO
> 
> So much for computers.

I found a two biologists who had disagreement about various aspects of the Cambrian Explosion.

Since they could not agree I guess that means the Biblical account of creation must be true, yes?

> [@](#):
>
> My model moved.

So what? Samuel Langley’s models could fly.

> [@](#):
>
> [http://www.youtube.com/watch?v=z0kUICwO93Q](http://www.youtube.com/watch?v=z0kUICwO93Q)
> 
> But where has **ANYBODY** made a self supporting physical model where the top 15% can destroy the bottom 85% with a drop of less than 10% of the height. If it can’t be done then something else had to be involved in the destruction of the WTC.
> 
> psik

Refer back to my first comment but change the complaint to: “we can’t see monkeys evolve into humans”.

---

<div class="post-metadata">

**Author:** ![conway](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@conway](https://boards.straightdope.com/u/conway)\
**Post date:** [July 22, 2010, 7:33pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/198 "2010-07-22T19:33:23Z")

</div>

> [@Valgard](#):
>
> Welcome back. As I recall you participated in (and perhaps even started) a thread on this exact same subject months ago, complete with questions about the “exact distribution of concrete and steel” and videos of a bit of dowel with some washers on it which were supposed to accurately model the behavior of a couple of 1000+ foot tall skyscrapers. I can’t find the thread but the questions were thoroughly answered. Perhaps someone with better search skills (or with the time to wade through some of the WTC threads with 25+ pages of posts) can throw the links up.

[Enjoy…25 pages of doughy, chocolatey, conspiracy goodness..](http://boards.straightdope.com/sdmb/showthread.php?t=518232)

---

<div class="post-metadata">

**Author:** ![RickJay](https://avatars.discourse-cdn.com/v4/letter/r/bb73d2/32.png) [@RickJay](https://boards.straightdope.com/u/RickJay)\
**Post date:** [July 22, 2010, 7:44pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/199 "2010-07-22T19:44:22Z")

</div>

> [@psikeyhackr](#):
>
> The trouble with computer models is that you have to trust the math and the code and it would be extremely difficult to track down an error either deliberate or accidental. So it really comes down to trusting the people that made the computer model. Computer models are really funny when they have obvious stupd errors. Look at that Purdue simulation of the north tower impact. Skyscrapers sway in the wind. How could the plane impact without the core columns moving. The NIST hasa graph of the oscillation of the south tower due to impact but Purdue says the north tower didn’t move.
> 
> ROFLMAO
> 
> So much for computers.
> 
> My model moved.

That is about as convincing as me moving my arm back and forth. That model doesn’t move anything like a skyscraper. Even the WTC’s wind sway wasn’t anything close to the amazing elasticity of your model, and your objects bounce off the surface instead of breaking up inside them and exploding.

Are you joking? Are you suggesting the towers WEREN’T hit by airplanes?

---

<div class="post-metadata">

**Author:** ![CurtC](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@CurtC](https://boards.straightdope.com/u/CurtC)\
**Post date:** [July 22, 2010, 7:52pm UTC](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182/200 "2010-07-22T19:52:20Z")

</div>

> [@psikeyhackr](#):
>
> But where has **ANYBODY** made a self supporting physical model where the top 15% can destroy the bottom 85% with a drop of less than 10% of the height. If it can’t be done then something else had to be involved in the destruction of the WTC.

Do you _really_ think that when the top 17 floor section of the North Tower fell onto floor number 93, that floor 93 would be able to stop the fall?

And if it couldn’t stop the fall, why would you think that floor 92 would be able to stop 18 floors worth of falling building?

And if that didn’t stop it, why would you think that floor number 91 would be able to stop 19 floors worth of falling building?

…

Surely you don’t think that floor number 50 would have been able to stop the top 60 floors worth of building?

Where do you think this arrest of the collapse would happen? It just gets less likely to stop as it goes down - it’s an avalanche.

[Previous page](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182.md?page=9)

[Next page](https://boards.straightdope.com/t/an-angle-of-the-wtc-collapse-id-never-seen/547182.md?page=11)
