# Android power save mode; how to undo?

**URL:** <https://boards.straightdope.com/t/android-power-save-mode-how-to-undo/694960>\
**Category:** Factual Questions\
**Created:** [August 6, 2014, 5:21pm UTC](https://boards.straightdope.com/t/android-power-save-mode-how-to-undo/694960 "2014-08-06T17:21:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Amateur\_Barbarian](https://avatars.discourse-cdn.com/v4/letter/a/59ef9b/32.png) [@Amateur\_Barbarian](https://boards.straightdope.com/u/Amateur_Barbarian)\
**Post date:** [August 6, 2014, 5:21pm UTC](https://boards.straightdope.com/t/android-power-save-mode-how-to-undo/694960/1 "2014-08-06T17:21:57Z")

</div>

So after three or four years of carrying Android phones, I found myself in a situation where my battery life was dropping and I needed a couple more hours before I could get to a charger. So on the alert message at around 20%, I tapped “Save Power.”

My effin’ Note II hasn’t worked right since. That option seems to have turned off every ancilliary feature - screen rotation, email check, screen brightness, etc. endlessly. I keep fixing settings but I can’t, for example, seem to make K9 Mail go back to automatically checking - I go hours before I realize I haven’t seen any new stuff, and a manual check brings in a dozen.

Other than by laboriously working through every setting I can think of, is there some quick way to undo this “shut off every useful feature so that your now brick-like phone will keep working (for certain limited values of “working”) a little longer”?

---

<div class="post-metadata">

**Author:** ![SeaDragonTattoo](https://avatars.discourse-cdn.com/v4/letter/s/df705f/32.png) [@SeaDragonTattoo](https://boards.straightdope.com/u/SeaDragonTattoo)\
**Post date:** [August 6, 2014, 5:46pm UTC](https://boards.straightdope.com/t/android-power-save-mode-how-to-undo/694960/2 "2014-08-06T17:46:49Z")

</div>

Menu–\>Settings–\>My Phone–\>Power Saving Mode–\>there’s a slider button for on and off, but you can also tap it for more options. It’s likely set to “always on” rather than “auto enable.”
