# Breaking in an RC car electric motor by dunking it in \*water\* while it's operating?

**URL:** <https://boards.straightdope.com/t/breaking-in-an-rc-car-electric-motor-by-dunking-it-in-water-while-its-operating/657599>\
**Category:** Factual Questions\
**Created:** [May 6, 2013, 3:53am UTC](https://boards.straightdope.com/t/breaking-in-an-rc-car-electric-motor-by-dunking-it-in-water-while-its-operating/657599 "2013-05-06T03:53:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![astro](https://avatars.discourse-cdn.com/v4/letter/a/9dc877/32.png) [@astro](https://boards.straightdope.com/u/astro)\
**Post date:** [May 6, 2013, 3:53am UTC](https://boards.straightdope.com/t/breaking-in-an-rc-car-electric-motor-by-dunking-it-in-water-while-its-operating/657599/1 "2013-05-06T03:53:41Z")

</div>

[Per this video](http://www.youtube.com/watch?v=mD3nWxmgX70)

Does this really work?

Why does this work?

Why doesn’t the motor short out?

---

<div class="post-metadata">

**Author:** ![TriPolar](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tripolar/32/3008_2.png) [@TriPolar](https://boards.straightdope.com/u/TriPolar)\
**Post date:** [May 6, 2013, 4:02am UTC](https://boards.straightdope.com/t/breaking-in-an-rc-car-electric-motor-by-dunking-it-in-water-while-its-operating/657599/2 "2013-05-06T04:02:30Z")

</div>

[Some info on why this is done](http://www.rcuniverse.com/forum/m_5628228/tm.htm). Seems idiotic to me, it’s just a matter of breaking in the brushes to get them to conform to the shape of the commutator. And who still uses brushed DC motors like those anymore anyway?

---

<div class="post-metadata">

**Author:** ![Machine\_Elf](https://avatars.discourse-cdn.com/v4/letter/m/82dd89/32.png) [@Machine\_Elf](https://boards.straightdope.com/u/Machine_Elf)\
**Post date:** [May 6, 2013, 12:14pm UTC](https://boards.straightdope.com/t/breaking-in-an-rc-car-electric-motor-by-dunking-it-in-water-while-its-operating/657599/3 "2013-05-06T12:14:44Z")

</div>

> [@astro](#):
>
> [Per this video](http://www.youtube.com/watch?v=mD3nWxmgX70)
> 
> Does this really work?
> 
> Why does this work?
> 
> Why doesn’t the motor short out?

The video mentions distilled water, i.e. water with very little contamination. This is a very poor conductor, so the motor will not short out. If you put the motor in tap water (which has a substantial amount of dissolved minerals that enhance conductivity), there will be some leakage current, but the motor will still be operable.

If you drive your full-sized car into a lake, the headlights will continue to operate for a long time, and so will the electric windows and door locks (though perhaps not for _quite_ as long as if the car were on dry land).

---

<div class="post-metadata">

**Author:** ![Hi\_Medlo](https://avatars.discourse-cdn.com/v4/letter/h/a183cd/32.png) [@Hi\_Medlo](https://boards.straightdope.com/u/Hi_Medlo)\
**Post date:** [May 6, 2013, 3:17pm UTC](https://boards.straightdope.com/t/breaking-in-an-rc-car-electric-motor-by-dunking-it-in-water-while-its-operating/657599/4 "2013-05-06T15:17:58Z")

</div>

I’ve done this with regular tap water and it works fine. Apparently the water isn’t conductive enough to cause problems. I hooked it up to a standard D cell and just ran it down.  
I was using a brushed motor because that’s what was required for the class of airplane it was going in.  
R/C cars still commonly use brushed motors despite the brushless variety becoming dominant in model aircraft.
