# Broken lightbulb in socket; potato won't help

**URL:** <https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383>\
**Category:** Factual Questions\
**Created:** [February 15, 2004, 7:59pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383 "2004-02-15T19:59:12Z")\
**Posts on this page:** 11\
**Page:** 2

<div class="post-metadata">

**Author:** ![Richard](https://avatars.discourse-cdn.com/v4/letter/r/f0a364/32.png) [@Richard](https://boards.straightdope.com/u/Richard)\
**Post date:** [February 16, 2004, 7:21pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/21 "2004-02-16T19:21:44Z")

</div>

I have a similar problem that I hope someone can help me with.

I have a light fixture with a glass shade that is attached to the fixture with set screws, near where the bulb screws into the fixture. The opening in the shade where it attaches to the fixture is too small to fit over the bulb, so the only way to remove the shade is to first remove the bulb. The bulb is burned out, but when I try to remove it, it is stuck tight enough in the socket that the whole socket turns with it, eventually coming loose from the fixture. I can’t hold the socket to keep it from turning, because the shade is in the way.

I have thought about breaking the bulb, and then removing the shade, but I’m hoping there is some better way.

On another topic, while typing this, it happened twice that everything I had typed just disappeared from the screen. I must have accidentally hit some key that made that happen, but I have no idea what key would do that. Any ideas?

---

<div class="post-metadata">

**Author:** ![The\_Flying\_Dutchman](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@The\_Flying\_Dutchman](https://boards.straightdope.com/u/The_Flying_Dutchman)\
**Post date:** [February 16, 2004, 7:46pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/22 "2004-02-16T19:46:41Z")

</div>

> [@dmartin](#):
>
> Or, as someone else has already mentioned, if the switch was miswired you could still have a live contact in the socket.

Okay, I’ll buy the possibility that one may not be able to determine when the switch is off. but this "miswired " thing gets me. If history tell you that you’re able to turn the light on and off, how can you still have a live contact in the socket that will not turn on a functioning light bulb? Keep in mind that we are not playing with wires here, just a “functioning” light bulb socket.

---

<div class="post-metadata">

**Author:** ![zut](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/zut/32/2875_2.png) [@zut](https://boards.straightdope.com/u/zut)\
**Post date:** [February 16, 2004, 8:13pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/23 "2004-02-16T20:13:06Z")

</div>

> [@grienspace](#):
>
> [T]his "miswired " thing gets me. If history tell you that you’re able to turn the light on and off, how can you still have a live contact in the socket that will not turn on a functioning light bulb?

To light a light bulb, you need a circuit that that follows a complete path from the voltage souce (the “hot” side), through the bulb, and back to some lower voltage point (the “neutral” side). Opening a switch _anywhere_ in this circuit will turn the bulb off; it doesn’t matter if the switch is closer than the bulb to the source, or the other way around. Light switches are supposed to be wired so that the switch is closer to the voltage source than the bulb; when the switch is open, the bulb is connected only to the neutral side, and it’s safe to work on.

However, a light switch can easily be wired so that the switch is closer to the lower voltage return than the bulb is; in this case, when the switch is open, the bulb is connected to the _hot_ side. Because the switch is open, no current flows, and the bulb does not light. However, the bulb _is_ at 120V potential, and if you touch the contact in the socket while simultaneously touching ground, current is apt to flow through you.

---

<div class="post-metadata">

**Author:** ![The\_Flying\_Dutchman](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@The\_Flying\_Dutchman](https://boards.straightdope.com/u/The_Flying_Dutchman)\
**Post date:** [February 16, 2004, 8:24pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/24 "2004-02-16T20:24:27Z")

</div>

Thanx. Now I get it !

---

<div class="post-metadata">

**Author:** ![jujuju](https://avatars.discourse-cdn.com/v4/letter/j/7993a0/32.png) [@jujuju](https://boards.straightdope.com/u/jujuju)\
**Post date:** [February 16, 2004, 9:03pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/25 "2004-02-16T21:03:10Z")

</div>

not to be a smart a\*\*, but what if you stood on a thick piece of styrofoam and stuck your finger in a light socket? would a chair work?

---

<div class="post-metadata">

**Author:** ![spingears](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@spingears](https://boards.straightdope.com/u/spingears)\
**Post date:** [February 16, 2004, 10:28pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/26 "2004-02-16T22:28:18Z")

</div>

> [@jujuju](#):
>
> not to be a smart a\*\*, but what if you stood on a thick piece of styrofoam and stuck your finger in a light socket? would a chair work?

Theory say that if you are insulated from ground there is no circuit for electrocution.  
Syrofoam, DRY wooden chair, dry rubber boots or overshoes, H.D. fubber gloves, etc.

BUT if you stick a finger of one hand in the socket and contact the hot wire and touch the outside of the socker with the other you are a likely candidate for an early demise.

Otherwise if one finger contacts both the hot center of the socket and the shell you are guaranteed an unpleaseant shock and possible burn if the socke is hot.

THEREFORE ALWAYS DISCONNECT THE POWER !

---

<div class="post-metadata">

**Author:** ![Finagle](https://avatars.discourse-cdn.com/v4/letter/f/b19c9b/32.png) [@Finagle](https://boards.straightdope.com/u/Finagle)\
**Post date:** [February 16, 2004, 10:49pm UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/27 "2004-02-16T22:49:23Z")

</div>

> [@dmartin](#):
>
> Or, as someone else has already mentioned, if the switch was miswired you could still have a live contact in the socket.

This is extraordinarily good advice. I came mighty close to dying because some schmuck miswired my hall chandelier which happens

a) To be hanging over the staircase.  
b) Has bulbs that are barely reachable if you stretch over from the top step.

Although the power is off, the light is apparently switched through the neutral, so when I tried to replace a bulb, I got a substantial shock and ended up involuntarily flinging the light globe down the staircase and nearly following it myself (fortunately I got flung backwards instead of forwards).

---

<div class="post-metadata">

**Author:** ![Seven](https://avatars.discourse-cdn.com/v4/letter/s/3d9bf3/32.png) [@Seven](https://boards.straightdope.com/u/Seven)\
**Post date:** [February 17, 2004, 1:01am UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/28 "2004-02-17T01:01:52Z")

</div>

> [@lieu](#):
>
> Good deal. Btw, **Seven** was not suggesting that anyone drink a bottle of wine before attempting this feat.

I wasn’t???!!!

If not drunk, how do YOU play with the electrical in your house?

---

<div class="post-metadata">

**Author:** ![gbrohman](https://avatars.discourse-cdn.com/v4/letter/g/3be4f8/32.png) [@gbrohman](https://boards.straightdope.com/u/gbrohman)\
**Post date:** [February 17, 2004, 3:14am UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/29 "2004-02-17T03:14:46Z")

</div>

1st of all there is an insulated tool made for extracting broken light bulbs. Now that you know that, the way i do it is to use the new bulb. With just a little pressure in as -U- turn the bulb and out comes the old bulb base.

---

<div class="post-metadata">

**Author:** ![erislover](https://avatars.discourse-cdn.com/v4/letter/e/71e660/32.png) [@erislover](https://boards.straightdope.com/u/erislover)\
**Post date:** [February 17, 2004, 3:28am UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/30 "2004-02-17T03:28:12Z")

</div>

I’ve always used a bunched up washcloth to circumvent both issues of glass and electricity. Scrunch it up, press and twist. It will catch on something and spin it right out.

---

<div class="post-metadata">

**Author:** ![erislover](https://avatars.discourse-cdn.com/v4/letter/e/71e660/32.png) [@erislover](https://boards.straightdope.com/u/erislover)\
**Post date:** [February 17, 2004, 3:29am UTC](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383/31 "2004-02-17T03:29:19Z")

</div>

The washcloth, of course, would be dry, right out of the closet.

[Previous page](https://boards.straightdope.com/t/broken-lightbulb-in-socket-potato-wont-help/229383.md?page=1)
