# Calculating lag in telephone wires (Math)

**URL:** <https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972>\
**Category:** Factual Questions\
**Created:** [September 29, 2007, 7:49pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972 "2007-09-29T19:49:19Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![dgrdfd](https://avatars.discourse-cdn.com/v4/letter/d/eb8c5e/32.png) [@dgrdfd](https://boards.straightdope.com/u/dgrdfd)\
**Post date:** [September 29, 2007, 7:49pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/1 "2007-09-29T19:49:19Z")

</div>

Suppose you have a wire of length L strung between two poles separated by a distance of A. They are attached at the poles at the same height. What is the distance between the lowest point the wire lags (hangs down) and the point where the wire attaches to the pole?

My idea was that when the wire lags it would essentially be creating a semicircle. If I could create some triangles and using circumference ratios, trig, etc I could come up with an equation where H = f(A, L), but I just can’t do it.

For the record, this isn’t a homework problem. Just something that popped into my head.

[Picture of my problem](http://img249.imageshack.us/my.php?image=s4022600mc2.jpg)

[Here’s an illustration of my idea](http://img219.imageshack.us/my.php?image=s4022601rf6.jpg)

[edit] Oh, and please ignore some of the work around my illustration. I realize it’s incorrect.

---

<div class="post-metadata">

**Author:** ![Q.E.D](https://avatars.discourse-cdn.com/v4/letter/q/51bf81/32.png) [@Q.E.D](https://boards.straightdope.com/u/Q.E.D)\
**Post date:** [September 29, 2007, 7:52pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/2 "2007-09-29T19:52:34Z")

</div>

To help you in your search, the curve so formed is called a catenary.

---

<div class="post-metadata">

**Author:** ![yabob](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/yabob/32/2821_2.png) [@yabob](https://boards.straightdope.com/u/yabob)\
**Post date:** [September 29, 2007, 7:55pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/3 "2007-09-29T19:55:42Z")

</div>

It doesn’t create a semicircle. It creates a catenary:

> **[Catenary](https://en.wikipedia.org/wiki/Catenary)**
>
> In physics and geometry, a catenary (US: /ˈkætənɛri/ KAT-ən-err-ee, UK: /kəˈtiːnəri/ kə-TEE-nər-ee) is the curve that an idealized hanging chain or cable assumes under its own weight when supported only at its ends in a uniform gravitational field.
> The catenary curve has a U-like shape, superficially similar in appearance to a parabola, which it is not.
> The curve appears in the design of certain types of arches and as a cross section of the catenoid—the shape assumed by a soap film bounded by ...

If it’s very shallow, the semicircle may be a decent approximation, but if there’s a large amount of lag, it won’t even be close.

---

<div class="post-metadata">

**Author:** ![Desert\_Nomad](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/desert_nomad/32/177_2.png) [@Desert\_Nomad](https://boards.straightdope.com/u/Desert_Nomad)\
**Post date:** [September 29, 2007, 7:57pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/4 "2007-09-29T19:57:12Z")

</div>

Actually it is not a semicircle, but rather a [catenary](http://en.wikipedia.org/wiki/Catenary).

---

<div class="post-metadata">

**Author:** ![Q.E.D](https://avatars.discourse-cdn.com/v4/letter/q/51bf81/32.png) [@Q.E.D](https://boards.straightdope.com/u/Q.E.D)\
**Post date:** [September 29, 2007, 7:58pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/5 "2007-09-29T19:58:18Z")

</div>

A catenary? Are you sure?

---

<div class="post-metadata">

**Author:** ![dgrdfd](https://avatars.discourse-cdn.com/v4/letter/d/eb8c5e/32.png) [@dgrdfd](https://boards.straightdope.com/u/dgrdfd)\
**Post date:** [September 29, 2007, 8:30pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/6 "2007-09-29T20:30:32Z")

</div>

Oh, thanks guys. I knew there had to be name for it and it’s embarrassing because obviously if you had a 100 foot wire between two poles that are 1 foot apart it wouldn’t be a semicircle. 😃

Thanks!

---

<div class="post-metadata">

**Author:** ![Ludovic](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@Ludovic](https://boards.straightdope.com/u/Ludovic)\
**Post date:** [September 29, 2007, 8:38pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/7 "2007-09-29T20:38:11Z")

</div>

I think the shape is called a catenary.

---

<div class="post-metadata">

**Author:** ![Chronos](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chronos/32/134_2.png) [@Chronos](https://boards.straightdope.com/u/Chronos)\
**Post date:** [September 29, 2007, 10:30pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/8 "2007-09-29T22:30:35Z")

</div>

Rather than chiming in with any of the obvious jokes about deep spots in the ocean or songs named after Mexican rivers, I’ll point out that a catenary (functionally, a hyperbolic cosine) is also the optimal shape for a freestanding (that is, not supporting anything else) arch, such as the famous St. Louis Gateway Arch. Meanwhile, if the weight supported by an arch or cable is uniform horizontally (as, for instance, with a suspension bridge), the shape is a parabola, and if the weight supported at a point is proportional to the difference between the point and the maximum (or minimum) of the arch (or cable), as with a stone arch bridge, the optimum shape is a cycloid.

---

<div class="post-metadata">

**Author:** ![Musicat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/musicat/32/20189_2.png) [@Musicat](https://boards.straightdope.com/u/Musicat)\
**Post date:** [September 29, 2007, 10:51pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/9 "2007-09-29T22:51:18Z")

</div>

[QUOTE=Ludovic]  
I think the shape is called a catenary.  
[/QUOTE]  
Which is a cross between a cat and a canary, as if you didn’t know.

---

<div class="post-metadata">

**Author:** ![Ludovic](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@Ludovic](https://boards.straightdope.com/u/Ludovic)\
**Post date:** [September 29, 2007, 11:47pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/10 "2007-09-29T23:47:29Z")

</div>

[QUOTE=Chronos]  
Rather than chiming in with any of the obvious jokes about deep spots in the ocean or songs named after Mexican rivers, I’ll point out that a catenary (functionally, a hyperbolic cosine) is also the optimal shape for a freestanding (that is, not supporting anything else) arch, such as the famous St. Louis Gateway Arch.  
[/QUOTE]  
What about freestanding guide bars on…treadmills?

---

<div class="post-metadata">

**Author:** ![ftg](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/ftg/32/2801_2.png) [@ftg](https://boards.straightdope.com/u/ftg)\
**Post date:** [September 30, 2007, 2:14am UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/11 "2007-09-30T02:14:35Z")

</div>

Note that a catenary applies to infinitely flexibly cables. The inherent stiffness of wires changes things a bit.

So, technically, no right answer so far.

---

<div class="post-metadata">

**Author:** ![Crafter\_Man](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/crafter_man/32/458_2.png) [@Crafter\_Man](https://boards.straightdope.com/u/Crafter_Man)\
**Post date:** [September 30, 2007, 4:22am UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/12 "2007-09-30T04:22:09Z")

</div>

And… this is also why the 120V/240V power lines going to your house are aluminum and not copper. Ohm for ohm, aluminum is lighter than copper. If the cables were copper, you would need more poles to support the weight of the cables.

---

<div class="post-metadata">

**Author:** ![Tim\_T-Bonham.net](https://avatars.discourse-cdn.com/v4/letter/t/46a35a/32.png) [@Tim\_T-Bonham.net](https://boards.straightdope.com/u/Tim_T-Bonham.net)\
**Post date:** [September 30, 2007, 4:59am UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/13 "2007-09-30T04:59:24Z")

</div>

[QUOTE=Crafter\_Man]  
And… this is also why the 120V/240V power lines going to your house are aluminum and not copper. Ohm for ohm, aluminum is lighter than copper. If the cables were copper, you would need more poles to support the weight of the cables.  
[/QUOTE]  
No, I think the major reason is that aluminum wire is cheaper than copper.

For the average house, the distance from the power lines is pretty short, so copper wires wouldn’t require more poles (they’d just hang a bit lower).

The disadvantages of aluminum wire which have pretty much removed it from use inside houses (loosening as power goes on & off, need for professional connections to prevent oxidation, and risk of connecting aluminum and copper wires) don’t apply much to the power feed to a house, so aluminum wire is still used there.

---

<div class="post-metadata">

**Author:** ![Crafter\_Man](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/crafter_man/32/458_2.png) [@Crafter\_Man](https://boards.straightdope.com/u/Crafter_Man)\
**Post date:** [September 30, 2007, 11:52am UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/14 "2007-09-30T11:52:58Z")

</div>

[QUOTE=t-bonham@scc.net]  
I think the major reason is that aluminum wire is cheaper than copper.  
[/QUOTE]  
Well, that too. 🙂

---

<div class="post-metadata">

**Author:** ![Chronos](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chronos/32/134_2.png) [@Chronos](https://boards.straightdope.com/u/Chronos)\
**Post date:** [October 1, 2007, 1:14am UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/15 "2007-10-01T01:14:53Z")

</div>

> [@](#):
>
> For the average house, the distance from the power lines is pretty short, so copper wires wouldn’t require more poles (they’d just hang a bit lower).

Not even that. The shape of a catenary is determined entirely by the location of the endpoints and the length of the cable. Gravity and the density of the cable don’t matter at all, as long as neither is zero.

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [October 1, 2007, 2:29pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/16 "2007-10-01T14:29:38Z")

</div>

[QUOTE=Chronos]  
Not even that. The shape of a catenary is determined entirely by the location of the endpoints and the length of the cable.  
[/QUOTE]

Well, there’s also the issue of tension in the cable and the ability of the supports (power poles) to withstand that tension.

---

<div class="post-metadata">

**Author:** ![David\_Simmons](https://avatars.discourse-cdn.com/v4/letter/d/9de053/32.png) [@David\_Simmons](https://boards.straightdope.com/u/David_Simmons)\
**Post date:** [October 1, 2007, 2:40pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/17 "2007-10-01T14:40:02Z")

</div>

This post removed because **ftg** had already made the same point.

---

<div class="post-metadata">

**Author:** ![David\_Simmons](https://avatars.discourse-cdn.com/v4/letter/d/9de053/32.png) [@David\_Simmons](https://boards.straightdope.com/u/David_Simmons)\
**Post date:** [October 1, 2007, 2:45pm UTC](https://boards.straightdope.com/t/calculating-lag-in-telephone-wires-math/420972/18 "2007-10-01T14:45:09Z")

</div>

[QUOTE=Xema]  
Well, there’s also the issue of tension in the cable and the ability of the supports (power poles) to withstand that tension.  
[/QUOTE]  
The wires go both directions from the pole so the tension isn’t a factor except for its downward component. At corners where the wires aren’t directly in line, guy wires are used to help support the pole.
