# Calling all techies: WinME DMA help requested. I'm stumped.

**URL:** <https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846>\
**Category:** Factual Questions\
**Created:** [December 25, 2002, 3:34pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846 "2002-12-25T15:34:30Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fenris](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/fenris/32/498_2.png) [@Fenris](https://boards.straightdope.com/u/Fenris)\
**Post date:** [December 25, 2002, 3:34pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/1 "2002-12-25T15:34:30Z")

</div>

Here’s the situation:

I’m running Windows ME (and please, let’s not debate WinME: good or bad: It supports DMA and that’s all that’s relevant for this) and I just got a Sony DRU500-A DVD-RW for a birthday/Hannukah present.

It suggests that DMA be enabled for best performance.

I go to my control panel, go to system, go to Device Manger and check. NONE of my IDE devices have DMA boxes listed (the CD-RW, the DVD-RW or the HDDs). It’s not that they’re ghosted, they’re not even listed. I know for a fact that the MB is

I check the System devices under Device Manager and sure enough, there’s a Direct Memory Access Controller device. I remove it, reboot and it reinstalls.

_Still_ no check-boxes.

I go to the MB manufacturer’ page (It’s an Intel D850MV) and update all my bios/device drivers. No luck (but in the BIOS it shows that all devices have DMA enabled.

Back to Windows, I check an app that came with the MB, “Intel Application Accelerator” and it shows the following (and I’m sorry to say that I’m out of my depth at this point). For each device, I get something like:  
DMA SW Mode Support: Not Supported  
DMA MW Mode Support: 0 - 1 - 2  
UDMA Mode Support: 0 - 1 - 2  
Current Transfer Mode: UDMA  
Transfer Mode Limit: No Limit

I have no idea what most of this means.

Note that the last one “Transfer Mode Limit” is the only one I can change and I can switch it to a bunch of different DMA modes or UDMA modes. I’ve tried switching it to various DMA or UDMA modes and I _still_ don’t get the check-box. And at this point I’m not sure I need it. I mean, per the utility, everything’s fine.

Is everything fine? Do I _need_ that DMA check box, if this other utility says it’s working? Any ideas what (if anything) I can/should do? I’m stumped.

TIA

Fenris

---

<div class="post-metadata">

**Author:** ![Urban\_Ranger](https://avatars.discourse-cdn.com/v4/letter/u/e9c0ed/32.png) [@Urban\_Ranger](https://boards.straightdope.com/u/Urban_Ranger)\
**Post date:** [December 25, 2002, 3:39pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/2 "2002-12-25T15:39:33Z")

</div>

AFAIK, your IDE devices always use DMA. They don’t use the PIO (programmed I/O) modes anymore.

---

<div class="post-metadata">

**Author:** ![astro](https://avatars.discourse-cdn.com/v4/letter/a/9dc877/32.png) [@astro](https://boards.straightdope.com/u/astro)\
**Post date:** [December 25, 2002, 4:01pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/3 "2002-12-25T16:01:20Z")

</div>

DMA is apparently displayed elsewhere on this board.  
[DMA info](http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=2f3401c27442%2424496ad0%243aef2ecf%40TKMSFTNGXA09&rnum=7&prev=/groups%3Fq%3DIntel%2BD850MV%2BDMA%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26selm%3D2f3401c27442%252424496ad0%25243aef2ecf%2540TKMSFTNGXA09%26rnum%3D7)

> [@](#):
>
> # IOn Tue, 15 Oct 2002 04:58:14 -0700, “taco bell gives gas”\<[sykotech@earthlink.net](mailto:sykotech@earthlink.net)\> wrote: besides gas, ive got another pain in the rear…i just performed a fresh install of xp pro on a WD 80 Gig 7200. in which is then processed through an Intel D850MV board. Mr. Happy Controller is a 82801BA. deciding to do this one right and actually take my time i went to Intel’s web to get all recent drivers. those were the new “Application Accelerator, the onboard scrub Sound Driver, and a Flash 'ur own Bios Express” .exe file. all were pretty painless and the machine still works, but now there is no darned DMA enabled (nor even an option) present. anywhere. please understand i know how to enable/disable/alter/scramble the setting in device mgr or admin tools. been scratchin my head on this one…anybody? c’mon…i dare ya. let’s see what ya got! -Syk-
> 
> worried about this too, and was told that the DMA info readouts now exist IN the Intell Accellerator app. Probably there’s an icon on your desktop. open it.  
> Earl

---

<div class="post-metadata">

**Author:** ![handy](https://avatars.discourse-cdn.com/v4/letter/h/b5a626/32.png) [@handy](https://boards.straightdope.com/u/handy)\
**Post date:** [December 25, 2002, 4:11pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/4 "2002-12-25T16:11:01Z")

</div>

Dru500a has a couple of firmware updates. Why dont you try them?

---

<div class="post-metadata">

**Author:** ![da\_pope](https://avatars.discourse-cdn.com/v4/letter/d/7ba0ec/32.png) [@da\_pope](https://boards.straightdope.com/u/da_pope)\
**Post date:** [December 25, 2002, 4:38pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/5 "2002-12-25T16:38:04Z")

</div>

the dma settings should be in the device manager under 'IDA/ATAPI Controllers" and check the ‘advanced settings’ of the ‘primary IDE channel’ and the ‘secondary IDE channel’ choose ‘DMA if available’ on all and reboot. check again and it wilkl report the status. your dvd is probably on the secondary channel, and should report that it’s using DMA. good luck!

---

<div class="post-metadata">

**Author:** ![astro](https://avatars.discourse-cdn.com/v4/letter/a/9dc877/32.png) [@astro](https://boards.straightdope.com/u/astro)\
**Post date:** [December 25, 2002, 6:27pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/6 "2002-12-25T18:27:34Z")

</div>

Just to clarify the board post I referenced.

The DMA settings for this MB and chipset are apparently no longer listed in the system hardware chain but are accessible through an applet called the “Intel Accelerator” that should be on your PC somewhere. Possibly as an separate applet under the Control Panel applets.

---

<div class="post-metadata">

**Author:** ![Fenris](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/fenris/32/498_2.png) [@Fenris](https://boards.straightdope.com/u/Fenris)\
**Post date:** [December 25, 2002, 8:21pm UTC](https://boards.straightdope.com/t/calling-all-techies-winme-dma-help-requested-im-stumped/144846/7 "2002-12-25T20:21:54Z")

</div>

**Astro** : that looks like it’s exactly what’s going on! Thanks to you (and everyone else) for the help!

Fenris
