# Can an MRI really rip metal through flesh?

**URL:** <https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278>\
**Category:** Factual Questions\
**Created:** [April 25, 2010, 4:29am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278 "2010-04-25T04:29:20Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Hari\_Seldon](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/hari_seldon/32/5173_2.png) [@Hari\_Seldon](https://boards.straightdope.com/u/Hari_Seldon)\
**Post date:** [April 25, 2010, 5:14pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/21 "2010-04-25T17:14:12Z")

</div>

I have a pacemaker and was told I cold never have an MRI. Couldn’t they manufacturer the pacemaker out of non-ferrous (or non-ferromagnetic) materials? Why not? I was also told it was perfectly OK to go through an airport metal detector (which doesn’t even always detect it, although some of them do).

---

<div class="post-metadata">

**Author:** ![bouv](https://avatars.discourse-cdn.com/v4/letter/b/bc8723/32.png) [@bouv](https://boards.straightdope.com/u/bouv)\
**Post date:** [April 25, 2010, 5:21pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/22 "2010-04-25T17:21:20Z")

</div>

> [@Hari\_Seldon](#):
>
> I have a pacemaker and was told I cold never have an MRI. Couldn’t they manufacturer the pacemaker out of non-ferrous (or non-ferromagnetic) materials? Why not? I was also told it was perfectly OK to go through an airport metal detector (which doesn’t even always detect it, although some of them do).

It’s not just the metal, it’s the electrical aspects. The MRI could induce a current in the pacemaker wire, and that would be a Very Bad Thing[sup]TM[/sup]. An airport metal detector is using a much, _much_ smaller magnetic field and so it’s not a problem.

---

<div class="post-metadata">

**Author:** ![asterion](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@asterion](https://boards.straightdope.com/u/asterion)\
**Post date:** [April 25, 2010, 7:30pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/23 "2010-04-25T19:30:52Z")

</div>

> [@Napier](#):
>
> I wondered about your posting, too. Near as I understand, a quench is just emptying the cryogen from the coil assembly through an exhaust pipe. From the point of an MRI center, I can see why buying and installing a bunch of liquid helium, and canceling a bunch of patient procedures, would be a big negative. But it doesn’t sound like the event of quenching itself would be bothersome. Why would you prefer to never see another one? Was there something upsetting about it?

Nothing upsetting about it. Besides, as I said, this was a brand-new 300 MHz NMR, not a MRI. But I don’t want to see another NMR quench because of the down time and cost involved. And I wouldn’t want to be inside an MRI when one happened. I’d expect it to be possibly scary (depending on where the gas came out), and a ton of bother. If nothing else, you’d have to make a new appointment for when the instrument was up and running again.

---

<div class="post-metadata">

**Author:** ![Napier](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@Napier](https://boards.straightdope.com/u/Napier)\
**Post date:** [April 25, 2010, 8:07pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/24 "2010-04-25T20:07:57Z")

</div>

> [@asterion](#):
>
> Nothing upsetting about it. Besides, as I said, this was a brand-new 300 MHz NMR, not a MRI. But I don’t want to see another NMR quench because of the down time and cost involved. And I wouldn’t want to be inside an MRI when one happened. I’d expect it to be possibly scary (depending on where the gas came out), and a ton of bother. If nothing else, you’d have to make a new appointment for when the instrument was up and running again.

What do you understand is the difference between MRI and NMR? I thought they just changed the name because the “nuclear” in NMR upset some people. In fact, the first time I had it done, they DID call it NMR. They both do imaging with nuclear magnetic resonance, unless you are referring to a device that does NMR of a small sample to produce a single spectrum, at a single point, without imaging. The single-point NMR devices I have seen or used are small, with samples that fit in vials rather than samples that walk in with insurance cards. Even with some huge 30 T field intensity, their dewars wouldn’t hold much, would they?

---

<div class="post-metadata">

**Author:** ![Hari\_Seldon](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/hari_seldon/32/5173_2.png) [@Hari\_Seldon](https://boards.straightdope.com/u/Hari_Seldon)\
**Post date:** [April 25, 2010, 9:18pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/25 "2010-04-25T21:18:08Z")

</div>

> [@bouv](#):
>
> It’s not just the metal, it’s the electrical aspects. The MRI could induce a current in the pacemaker wire, and that would be a Very Bad Thing[sup]TM[/sup]. An airport metal detector is using a much, _much_ smaller magnetic field and so it’s not a problem.

Thanks for the explanation.

---

<div class="post-metadata">

**Author:** ![put\_down\_the\_sabre](https://avatars.discourse-cdn.com/v4/letter/p/da6949/32.png) [@put\_down\_the\_sabre](https://boards.straightdope.com/u/put_down_the_sabre)\
**Post date:** [April 25, 2010, 9:27pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/26 "2010-04-25T21:27:58Z")

</div>

> [@Mama\_Zappa](#):
>
> That’s… interesting :eek:.
> 
> I had an MRI a couple of months ago and they gave me scrubs to wear for the process. I guess they didn’t want to risk _anything_. The other MRI that I had, many years earlier, I was able to wear street clothes after assuring them there was nothing metallic in them.
> 
> I had surgery (gallbladder) a month or so after this most recent MRI and the surgeon assured me that the metallic clips used were titanium and would not pose problems with future MRIs.

Yeah it was the third MRI I had had with this particular doctor, and so we were quite chatty. We started to go through the metals checklist, and got chatting about my glasses, and their metal content. I guess we skipped a step during the chat!

pdts

---

<div class="post-metadata">

**Author:** ![thirdname](https://avatars.discourse-cdn.com/v4/letter/t/d07c76/32.png) [@thirdname](https://boards.straightdope.com/u/thirdname)\
**Post date:** [April 25, 2010, 9:48pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/27 "2010-04-25T21:48:46Z")

</div>

[Here’s what it takes to remove a chair from an MRI](http://www.youtube.com/watch?v=4uzJPpC4Wuk)  
[Loose gurney in room](http://www.youtube.com/watch?v=byRIwDk21sw)  
[Small tank vs watermelon](http://www.youtube.com/watch?v=lEJ2notNLo0)  
[Large oxy tank](http://www.youtube.com/watch?v=7g5UVrOt2CI)

---

<div class="post-metadata">

**Author:** ![Shawn\_K\_1](https://avatars.discourse-cdn.com/v4/letter/s/c67d28/32.png) [@Shawn\_K\_1](https://boards.straightdope.com/u/Shawn_K_1)\
**Post date:** [April 26, 2010, 1:07am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/28 "2010-04-26T01:07:00Z")

</div>

I’ve had metal filings in my eyes, haven’t asked a doc yet but was told by other people that once that’s happened they’ll never give you an mri because they’re worried there still might be metal you eye and it’ll spin and make you blind. Any truth to that?

Does it actually hurt if you have a tattoo and get an mri?

---

<div class="post-metadata">

**Author:** ![CalMeacham](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/calmeacham/32/35_2.png) [@CalMeacham](https://boards.straightdope.com/u/CalMeacham)\
**Post date:** [April 26, 2010, 1:34am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/29 "2010-04-26T01:34:49Z")

</div>

I have metal fillings in my teeth and my malar bone has been wired back in place. I’ve had an MRI – no problems.

---

<div class="post-metadata">

**Author:** ![Attack\_from\_the\_3rd\_dimension](https://avatars.discourse-cdn.com/v4/letter/a/b38774/32.png) [@Attack\_from\_the\_3rd\_dimension](https://boards.straightdope.com/u/Attack_from_the_3rd_dimension)\
**Post date:** [April 26, 2010, 2:36am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/30 "2010-04-26T02:36:40Z")

</div>

> [@Shawn\_K\_1](#):
>
> I’ve had metal filings in my eyes, haven’t asked a doc yet but was told by other people that once that’s happened they’ll never give you an mri because they’re worried there still might be metal you eye and it’ll spin and make you blind. Any truth to that?
> 
> Does it actually hurt if you have a tattoo and get an mri?

Usually if someone has a history of metalworking, a plain x-ray of the skull and orbits will be taken to rule out a metallic fragment near the eye, because the magnet could rip the metal piece out.

Tattoos that have enough metal to heat up are not common, but they give the patient a panic button to push if anything starts to go wrong.

.

---

<div class="post-metadata">

**Author:** ![Harry1945](https://avatars.discourse-cdn.com/v4/letter/h/e47c2d/32.png) [@Harry1945](https://boards.straightdope.com/u/Harry1945)\
**Post date:** [April 26, 2010, 2:55am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/31 "2010-04-26T02:55:26Z")

</div>

I have a piece of ferrous metal imbedded in my shin. What it is, exactly, and how I got it are both unknown, but it hasn’t moved through two MRI’s on my knees. It could be very deeply imbedded, or covered by calcium, but I’m not curious enough to let them cut my leg open to find out.

---

<div class="post-metadata">

**Author:** ![BaneSidhe](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@BaneSidhe](https://boards.straightdope.com/u/BaneSidhe)\
**Post date:** [April 26, 2010, 3:39am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/32 "2010-04-26T03:39:59Z")

</div>

> [@Attack\_from\_the\_3rd\_dimension](#):
>
> Usually if someone has a history of metalworking, a plain x-ray of the skull and orbits will be taken to rule out a metallic fragment near the eye, because the magnet could rip the metal piece out.
> 
> Tattoos that have enough metal to heat up are not common, but they give the patient a panic button to push if anything starts to go wrong. .

Wasn’t this proved wrong on Mythbusters?

---

<div class="post-metadata">

**Author:** ![Mijin](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/mijin/32/9369_2.png) [@Mijin](https://boards.straightdope.com/u/Mijin)\
**Post date:** [April 26, 2010, 6:46am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/33 "2010-04-26T06:46:42Z")

</div>

> [@asterion](#):
>
> Just how many teslas are used in a standard MRI magnet and how does that compare to a reasonably high-field (say 500 MHz) NMR magnet? Personally, what would scare me even more would be the (extremely unlikely) chance of a quench while in the tube. I’ve seen an NMR quench and I’d prefer not to see another one. (The Varian tech was bringing a brand-new one online and it quenched.)

Note that MHz is a measure of frequency, not magnetic field strength.

However, assuming the 500MHz relates to the frequency of proton precession, the field strength can be calculated. For 500MHz, it’s about 12 tesla.

For medical applications, 3T has become pretty standard now, although there are still plenty of 1.5T machines around.  
There are a handful of 7T machines around, worldwide, and only one or two of around 11T and the latter are in the testing phase, rather than being used routinely on patients.

It’s much harder to make clinical MRI machines, mainly because of the difficulties of creating a uniform field over the diameter of the patient.

---

<div class="post-metadata">

**Author:** ![asterion](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@asterion](https://boards.straightdope.com/u/asterion)\
**Post date:** [April 26, 2010, 11:47am UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/34 "2010-04-26T11:47:56Z")

</div>

> [@Napier](#):
>
> What do you understand is the difference between MRI and NMR? I thought they just changed the name because the “nuclear” in NMR upset some people. In fact, the first time I had it done, they DID call it NMR. They both do imaging with nuclear magnetic resonance, unless you are referring to a device that does NMR of a small sample to produce a single spectrum, at a single point, without imaging. The single-point NMR devices I have seen or used are small, with samples that fit in vials rather than samples that walk in with insurance cards. Even with some huge 30 T field intensity, their dewars wouldn’t hold much, would they?

I am well aware of the difference between a clinical MRI and the Bruker NMR I used the other day to analyze a compound I synthesized. All the chemists I know use the language as I have to differentiate between a clinical NMR used in medical imaging and a single-sample NMR to obtain various spectra of chemical compounds.

It doesn’t take much liquid helium to quickly expand to a large amount of gas. I have no idea what the density of liquid helium is, but consider that a mole of helium weighs 4.00 g. After all, one mole of gas is 22.4 L, and a quenched NMR could release up to 100 cubic meters of gas. That’d be more than enough to cause an asphyxiation risk in a small room and I’ve used NMRs kept in some pretty small rooms.

---

<div class="post-metadata">

**Author:** ![Perciful](https://avatars.discourse-cdn.com/v4/letter/p/b38774/32.png) [@Perciful](https://boards.straightdope.com/u/Perciful)\
**Post date:** [April 26, 2010, 12:48pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/35 "2010-04-26T12:48:00Z")

</div>

I’m not allowed to get an MRI because of a medical implant. I will definately observe this rule after reading it could rip out of my flesh… :eek: I don’t set of metal detectors though?

---

<div class="post-metadata">

**Author:** ![cwthree](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@cwthree](https://boards.straightdope.com/u/cwthree)\
**Post date:** [April 26, 2010, 2:50pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/36 "2010-04-26T14:50:07Z")

</div>

> [@asterion](#):
>
> Just what it sounds like. Any NMR these days uses a supercooled superconducting electromagnet. The magnet is, basically, a loop of wire cooled to about 5 K by liquid helium. (The liquid helium is kept cold by a much larger dewer of liquid nitrogen at 77 K.) At that temperature, the metal becomes superconductive and the magnet is created by sending electricity through the loop. Once it’s fully energized, the magnet can keep running indefinitely without needing to add any more electricity to the system as long as it’s kept cold. For an NMR, the liquid nitrogen fill schedule is about once a week and the liquid nitrogen fill is about once a month. If for some reason some part of the magnet is no longer cooled and can start to heat up, that starts vaporizing the liquid helium. As that starts to expand near-explosively, all of a sudden you’ve got a big plume of inert gas coming out of the magnet and it won’t stop until the phase change is complete. In the meantime, everybody needs to get out of the room as there can be enough gas generated to dangerously lower the oxygen level. An NMR quench means lots of downtime and money lost as the magnet has to be brought back online.

So what’s the correct procedure for taking an NMR offline (e.g., to move it)? Power down the magnet while keeping it cold? How do they do that?

---

<div class="post-metadata">

**Author:** ![gotpasswords](https://avatars.discourse-cdn.com/v4/letter/g/c57346/32.png) [@gotpasswords](https://boards.straightdope.com/u/gotpasswords)\
**Post date:** [April 26, 2010, 3:00pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/37 "2010-04-26T15:00:44Z")

</div>

_The magnet is always on!_

This is just about the first thing that will be drilled into your head if you woark anywhere near an MRI room. Other than a quench, there’s really no “off” switch for the magnet.

A paperclip will get up to about 40 MPH with a 1.5T magnet. It may not kill you, but it’s certainly going to sting. A stronger magnet will accelerate things even faster.

It gets really interesting when police officers are involved - there have been a few cases of guns being sucked into the bore. In [one documented case](http://www.ajronline.org/cgi/content/full/178/5/1092), a firearm discharged **with the safety on** because the massive magnetic field moved the internal firing mechanism.

---

<div class="post-metadata">

**Author:** ![Attack\_from\_the\_3rd\_dimension](https://avatars.discourse-cdn.com/v4/letter/a/b38774/32.png) [@Attack\_from\_the\_3rd\_dimension](https://boards.straightdope.com/u/Attack_from_the_3rd_dimension)\
**Post date:** [April 26, 2010, 6:22pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/38 "2010-04-26T18:22:58Z")

</div>

> [@BaneSidhe](#):
>
> Wasn’t this proved wrong on Mythbusters?

I don’t think they tested all possible variants of tattoos and inks, but it would in theory require a large tattoo in the proper orientation with a metallic ink. It’s a theoretical risk, but not a daily issue by any means.

The panic button is there for whatever is causing a problem.

---

<div class="post-metadata">

**Author:** ![Machine\_Elf](https://avatars.discourse-cdn.com/v4/letter/m/82dd89/32.png) [@Machine\_Elf](https://boards.straightdope.com/u/Machine_Elf)\
**Post date:** [April 26, 2010, 6:41pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/39 "2010-04-26T18:41:14Z")

</div>

> [@Shawn\_K\_1](#):
>
> I’ve had metal filings in my eyes, haven’t asked a doc yet but was told by other people that once that’s happened they’ll never give you an mri because they’re worried there still might be metal you eye and it’ll spin and make you blind. Any truth to that?

In '94 I had to visit the ER because of a steel fleck embedded in my cornea. 12 years later I had to get an MRI, and told them about the fleck. I was pretty sure they had completely removed it in '94, but the MRI folks required an X-ray to verify that there was no ferrous material remaining in my eye. If they’re worried about metal in your eyes, they’ll X-ray you to be sure.

---

<div class="post-metadata">

**Author:** ![Perciful](https://avatars.discourse-cdn.com/v4/letter/p/b38774/32.png) [@Perciful](https://boards.straightdope.com/u/Perciful)\
**Post date:** [April 26, 2010, 10:42pm UTC](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278/40 "2010-04-26T22:42:19Z")

</div>

> [@Joe Frickin Friday](#):
>
> In '94 I had to visit the ER because of a steel fleck embedded in my cornea. 12 years later I had to get an MRI, and told them about the fleck. I was pretty sure they had completely removed it in '94, but the MRI folks required an X-ray to verify that there was no ferrous material remaining in my eye. If they’re worried about metal in your eyes, they’ll X-ray you to be sure.

My fear is that I will get in an accident and they will throw me in the MRI machine. If I am unconsious I can’t tell them. Hopefull they will see the scar on my back. I should get a medical ID tag.

[Previous page](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278.md?page=1)

[Next page](https://boards.straightdope.com/t/can-an-mri-really-rip-metal-through-flesh/537278.md?page=3)
