# Canon mx922 direct print to cd/dvd

**URL:** <https://boards.straightdope.com/t/canon-mx922-direct-print-to-cd-dvd/806653>\
**Category:** Factual Questions\
**Created:** [January 15, 2018, 12:48am UTC](https://boards.straightdope.com/t/canon-mx922-direct-print-to-cd-dvd/806653 "2018-01-15T00:48:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![INFOSEEKER\_II](https://avatars.discourse-cdn.com/v4/letter/i/3da27b/32.png) [@INFOSEEKER\_II](https://boards.straightdope.com/u/INFOSEEKER_II)\
**Post date:** [January 15, 2018, 12:48am UTC](https://boards.straightdope.com/t/canon-mx922-direct-print-to-cd-dvd/806653/1 "2018-01-15T00:48:42Z")

</div>

My new Canon mx922 works great on most functions. I wish to make my own layout and print directly onto the printable cd/dvd s. However, the method that they use is very difficult for me. Normal print on cd will allow a copy of an original commercial disc and then it will print that. This is NOT what I need!  
My Epson printers are doing a great job directly printing on the cd/DVDs.  
Has anyone had this problem? If so, would appreciate info how it can be resolved.  
Thanks

---

<div class="post-metadata">

**Author:** ![gaffa](https://avatars.discourse-cdn.com/v4/letter/g/e68b1a/32.png) [@gaffa](https://boards.straightdope.com/u/gaffa)\
**Post date:** [January 15, 2018, 10:28pm UTC](https://boards.straightdope.com/t/canon-mx922-direct-print-to-cd-dvd/806653/2 "2018-01-15T22:28:01Z")

</div>

I have an MX-922 and print on DVDs all the time. But I am not sure what you are asking. I use their software to design the labels and have no problem with it other than the tendency of the tray to not “catch” as it aligns - and I have to push it a bit to help it along as it starts.

---

<div class="post-metadata">

**Author:** ![anomalous1](https://avatars.discourse-cdn.com/v4/letter/a/e56c9b/32.png) [@anomalous1](https://boards.straightdope.com/u/anomalous1)\
**Post date:** [January 16, 2018, 1:45am UTC](https://boards.straightdope.com/t/canon-mx922-direct-print-to-cd-dvd/806653/3 "2018-01-16T01:45:49Z")

</div>

> [@gaffa](#):
>
> I have an MX-922 and print on DVDs all the time. But I am not sure what you are asking. I use their software to design the labels and have no problem with it other than the tendency of the tray to not “catch” as it aligns - and I have to push it a bit to help it along as it starts.

I too have had issues with this before, actually on several canon printers and some to the point where I must push the paper a little bit to have it feed, its really irritating.  
OP, I am also not quite sure what you’re asking, could you clarify what you are trying to do and what exactly is going wrong?