# Connecting a Galaxy Tab 3 to a HDTV television.

**URL:** <https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470>\
**Category:** Factual Questions\
**Created:** [February 16, 2014, 11:18am UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470 "2014-02-16T11:18:36Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Teuton](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/teuton/32/3864_2.png) [@Teuton](https://boards.straightdope.com/u/Teuton)\
**Post date:** [February 16, 2014, 11:18am UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470/1 "2014-02-16T11:18:36Z")

</div>

I have a Galaxy Tab 3 8.0", and I’d quite like to mirror it onto my TV (so I can use the SkyGo Tablet app, if it matters.).

I went and bought one of [these](http://www.maplin.co.uk/p/mhl-adaptor-5-pin-to-hdmi-and-micro-usb-n97nf) yesterday, as my tablet is specifically listed as compatible, and since my TV is older, I had read that I needed to get one with a power socket as the TV isn’t going to supply power to the tablet through the cable.

So, I plug it in… and nothing. I’ve read that what should happen is that it should recognise that it’s been plugged in, and ask if I want to Mirror it to the tv. This doesn’t happen, and when I go to the settings and “scan” for a device to mirror to, it comes up with no devices.  
I’m thinking I might have a duff adaptor, because when I plug everything in, I would expect the device to start to charge itself through the adaptor, but it doesn’t. But I thought I would ask here to see if anyone else had this trouble.  
Anyone got any ideas?

The TV, btw, is a Toshiba Regza, about 5 years old.

---

<div class="post-metadata">

**Author:** ![Claverhouse](https://avatars.discourse-cdn.com/v4/letter/c/13edae/32.png) [@Claverhouse](https://boards.straightdope.com/u/Claverhouse)\
**Post date:** [February 16, 2014, 1:22pm UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470/2 "2014-02-16T13:22:49Z")

</div>

I dunno; but yesterday I saw such a set-up working, with a Tesco Hudl tablet connected to a TV by a mini-usb/hdmi cable ( which cost £3 off eBay, whereas Tesco charges £15 for a Belkin cable ) and it just did work automatically.

You have to set the TV to the correct hdmi port in advance with your remote, of course ( HDMI1 or HDMI2 etc. ).

---

<div class="post-metadata">

**Author:** ![DETXL](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/detxl/32/19366_2.png) [@DETXL](https://boards.straightdope.com/u/DETXL)\
**Post date:** [February 16, 2014, 5:21pm UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470/3 "2014-02-16T17:21:30Z")

</div>

The adapter may or may not be fine, but it’s not compatible with your device. MHL can be implemented over standard 5-pin MicroUSB connectors (as the adapter you link describes) but later Samsung devices (at least from the Galaxy S3 onwards, and including your Galaxy Tab) use an 11-pin connector of a similar shape. So you’ll want to look for one of those, such as [this](http://www.maplin.co.uk/p/maplin-mhl-11-pin-adaptor-to-hdmi-and-micro-usb-n18nu) I suppose.

Incidentally this means that someone with an S2, S3 and Nexus 4 who wishes to connect them to an HDMI screen needs three separate adapters (5 and 11-pin MHL and Slimport), all of which outwardly look like a normal MicroUSB connector. So it goes.

---

<div class="post-metadata">

**Author:** ![Teuton](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/teuton/32/3864_2.png) [@Teuton](https://boards.straightdope.com/u/Teuton)\
**Post date:** [February 16, 2014, 6:59pm UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470/4 "2014-02-16T18:59:27Z")

</div>

> [@DETXL](#):
>
> The adapter may or may not be fine, but it’s not compatible with your device.

You’re quite right. Despite all I did to get the right one for my device, I still managed to get the wrong one. Thanks for your help!

---

<div class="post-metadata">

**Author:** ![Revtim](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/revtim/32/1042_2.png) [@Revtim](https://boards.straightdope.com/u/Revtim)\
**Post date:** [February 16, 2014, 8:49pm UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470/5 "2014-02-16T20:49:46Z")

</div>

It’s not there yet, but I think the developer will be adding screen mirroring to the AllCast app, which can then connect to your TV with a Chromecast device.

---

<div class="post-metadata">

**Author:** ![Revtim](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/revtim/32/1042_2.png) [@Revtim](https://boards.straightdope.com/u/Revtim)\
**Post date:** [February 16, 2014, 8:50pm UTC](https://boards.straightdope.com/t/connecting-a-galaxy-tab-3-to-a-hdtv-television/681470/6 "2014-02-16T20:50:57Z")

</div>

> [@Revtim](#):
>
> It’s not there yet, but I think the developer will be adding screen mirroring to the AllCast app, which can then connect to your TV with a Chromecast device.

Cite:

> **[Android Streaming App AllCast to Add Mirroring](https://thenextweb.com/news/android-streaming-app-allcast-adds-mirroring-now-you-can-play-flappy-bird-on-your-tv)**
>
> The app will soon be able to beam content to TVs, including Flappy Bird.

it’s a “work in progress”
