# DCX3400 (DVR): How to dim display?

**URL:** <https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284>\
**Category:** Factual Questions\
**Created:** [January 6, 2013, 9:19pm UTC](https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284 "2013-01-06T21:19:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johnny\_L.A](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/johnny_l.a/32/1084_2.png) [@Johnny\_L.A](https://boards.straightdope.com/u/Johnny_L.A)\
**Post date:** [January 6, 2013, 9:19pm UTC](https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284/1 "2013-01-06T21:19:27Z")

</div>

We have a new cable box/DVR, and the display is too bright. How can I dim it? Suggestions found on the web, to put a piece of tinted tape over it, are unsatisfying.

---

<div class="post-metadata">

**Author:** ![jz78817](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/jz78817/32/1028_2.png) [@jz78817](https://boards.straightdope.com/u/jz78817)\
**Post date:** [January 6, 2013, 9:23pm UTC](https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284/2 "2013-01-06T21:23:01Z")

</div>

I have an older DCT series Motorola box, and there’s no way I can find to do it. the couple of DCX series ones I’ve put hands on seem to be the same.

---

<div class="post-metadata">

**Author:** ![Nanoda](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@Nanoda](https://boards.straightdope.com/u/Nanoda)\
**Post date:** [January 7, 2013, 7:53am UTC](https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284/3 "2013-01-07T07:53:36Z")

</div>

For single LEDs, I’ll cover them with regular scotch tape, then colour it over with a Sharpie until it reaches the desired brightness. Kinda close to your original solution, but… 🙂

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [January 7, 2013, 1:01pm UTC](https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284/4 "2013-01-07T13:01:04Z")

</div>

You can use a bit of a post-it as well. Then after a week, switch to **Nanoda** ’s suggestion, and it will look positively classy.

---

<div class="post-metadata">

**Author:** ![Dog80](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@Dog80](https://boards.straightdope.com/u/Dog80)\
**Post date:** [January 7, 2013, 5:15pm UTC](https://boards.straightdope.com/t/dcx3400-dvr-how-to-dim-display/646284/5 "2013-01-07T17:15:32Z")

</div>

If you want to do it in the most professional way possible, you could replace the resistors that drive the display elements with higher value ones. This will cause the current feeding the display (and consecutively the light intensity) to drop.

I found a photo of the device and it looks like it uses a typical 7-segment display so all you have to replace is 7 resistors, maybe a few more if there are some extra elements.
