# Density of Rust as a Function of Diameter

**URL:** <https://boards.straightdope.com/t/density-of-rust-as-a-function-of-diameter/653489>\
**Category:** Factual Questions\
**Created:** [March 20, 2013, 8:24pm UTC](https://boards.straightdope.com/t/density-of-rust-as-a-function-of-diameter/653489 "2013-03-20T20:24:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MattProle](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@MattProle](https://boards.straightdope.com/u/MattProle)\
**Post date:** [March 20, 2013, 8:24pm UTC](https://boards.straightdope.com/t/density-of-rust-as-a-function-of-diameter/653489/1 "2013-03-20T20:24:59Z")

</div>

Hi all,

I would like to determine an approximate relationship between a rust particle diameter and it’s density.

Wikipedia reports the density of Fe2O3 as [5.242 g/cm3](http://en.wikipedia.org/wiki/Iron(III)_oxide) (solid). I would consider this the upper limit on rust density, which should decrease with increasing diameter. However, I have no other sources to base a range of density values as a function of particle diameter.

If anyone is aware of a density value for rust, please inform me.

Thanks!

---

<div class="post-metadata">

**Author:** ![Disheavel](https://avatars.discourse-cdn.com/v4/letter/d/e274bd/32.png) [@Disheavel](https://boards.straightdope.com/u/Disheavel)\
**Post date:** [March 20, 2013, 8:35pm UTC](https://boards.straightdope.com/t/density-of-rust-as-a-function-of-diameter/653489/2 "2013-03-20T20:35:32Z")

</div>

Purchase Iron Oxide from amazon. A 5 lb. bag is available. Take the volume of the bag. This would probably be an intermediate value as the particle size is quite small so packing would be quite good.

---

<div class="post-metadata">

**Author:** ![Dr.Strangelove](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/dr.strangelove/32/6613_2.png) [@Dr.Strangelove](https://boards.straightdope.com/u/Dr.Strangelove)\
**Post date:** [March 20, 2013, 9:59pm UTC](https://boards.straightdope.com/t/density-of-rust-as-a-function-of-diameter/653489/3 "2013-03-20T21:59:48Z")

</div>

Packing density shouldn’t depend on particle size; it depends on having a mix of sizes. A mix of 100 and 500 um particles (for instance) will have a greater density than either one alone, since the smaller particles will fill the voids left by the larger ones.
