# Do any of you use a clamp-on computer mouse platform?

**URL:** <https://boards.straightdope.com/t/do-any-of-you-use-a-clamp-on-computer-mouse-platform/990058>\
**Category:** In My Humble Opinion\
**Created:** [September 13, 2023, 4:52pm UTC](https://boards.straightdope.com/t/do-any-of-you-use-a-clamp-on-computer-mouse-platform/990058 "2023-09-13T16:52:29Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ZipperJJ](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/zipperjj/32/211_2.png) [@ZipperJJ](https://boards.straightdope.com/u/ZipperJJ)\
**Post date:** [September 13, 2023, 4:52pm UTC](https://boards.straightdope.com/t/do-any-of-you-use-a-clamp-on-computer-mouse-platform/990058/1 "2023-09-13T16:52:29Z")

</div>

I am having some issues with pain in my neck and I think part of it stems from my mouse setup. The mouse is high relative to the chair. I need to bring it down.

I was looking at some mouse platforms [like this](https://www.amazon.com/VIVO-Adjustable-Computer-Extended-MOUNT-MS01B/dp/B09MTZ4B4F/) and there’s a lot of them, most with very few reviews.

Does anyone have one that they use and could recommend? Or recommend against?

---

<div class="post-metadata">

**Author:** ![LSLGuy](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/lslguy/32/5813_2.png) [@LSLGuy](https://boards.straightdope.com/u/LSLGuy)\
**Post date:** [September 13, 2023, 6:58pm UTC](https://boards.straightdope.com/t/do-any-of-you-use-a-clamp-on-computer-mouse-platform/990058/2 "2023-09-13T18:58:26Z")

</div>

I had a similar device maybe 15 years ago. It was great for bashing your knee into. Other than that it was OK. But only OK, not great. The platform was always a little bit wobbly, not at all like the unmoving desk it was attached to. Which overall made the mousing a bit less accurate. I got used to it, but I’ve never felt the need to get another one.

---

<div class="post-metadata">

**Author:** ![markn\_1](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@markn\_1](https://boards.straightdope.com/u/markn_1)\
**Post date:** [September 14, 2023, 4:32am UTC](https://boards.straightdope.com/t/do-any-of-you-use-a-clamp-on-computer-mouse-platform/990058/3 "2023-09-14T04:32:19Z")

</div>

If your mouse is too high, isn’t your keyboard also too high? I have a desk that’s too high, so I attached an adjustable keyboard tray that holds the keyboard and mouse. I’ve been very satisfied with it. The clamp-on model in the OP looks kinda flimsy. My tray doesn’t seem to be available anymore, but it’s something like [this](https://www.amazon.com/HUANUO-Keyboard-Desk%EF%BC%8C360-Adjustable-Ergonomic/dp/B082NKBM62).

---

<div class="post-metadata">

**Author:** ![ZipperJJ](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/zipperjj/32/211_2.png) [@ZipperJJ](https://boards.straightdope.com/u/ZipperJJ)\
**Post date:** [September 14, 2023, 1:44pm UTC](https://boards.straightdope.com/t/do-any-of-you-use-a-clamp-on-computer-mouse-platform/990058/4 "2023-09-14T13:44:47Z")

</div>

My keyboard is on a tray that is part of my desk so it’s low. The keyboard is kinda big but even if it wasn’t I don’t think there would be room for a mouse. The desk is L-shaped so there’s not room for a bigger tray, either ☹
