# Electrical fan wiring question

**URL:** https://boards.straightdope.com/t/electrical-fan-wiring-question/939772
**Category:** Factual Questions
**Created:** [April 11, 2021, 12:21am UTC](https://boards.straightdope.com/t/electrical-fan-wiring-question/939772 "2021-04-11T00:21:02Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![HoneyBadgerDC](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/honeybadgerdc/32/1033_2.png) [@HoneyBadgerDC](https://boards.straightdope.com/u/HoneyBadgerDC)
#### Post date: [April 11, 2021, 12:21am UTC](https://boards.straightdope.com/t/electrical-fan-wiring-question/939772/1 "2021-04-11T00:21:02Z")

</div>

I salvaged a blower motor assembly from a portable room air conditioner and I am having trouble wiring it up. It may have a bad motor I don’t know for sure. I want to wire it to a standard 3 prong power cord.

Blue ( hard to read but looks like it is for switching  
Red- High  
Yellow- medium  
White- low  
2 black wires that diagram show going into the opposite side of the motor. I want to wire it for high.speed.

Any help would be appreciated.

---

<div class="post-metadata">

### Author: ![TriPolar](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tripolar/32/3008_2.png) [@TriPolar](https://boards.straightdope.com/u/TriPolar)
#### Post date: [April 11, 2021, 12:53am UTC](https://boards.straightdope.com/t/electrical-fan-wiring-question/939772/2 "2021-04-11T00:53:57Z")

</div>

Look for a nameplate on the motor. If you can identify the motor the wiring diagram may be available.

---

<div class="post-metadata">

### Author: ![HoneyBadgerDC](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/honeybadgerdc/32/1033_2.png) [@HoneyBadgerDC](https://boards.straightdope.com/u/HoneyBadgerDC)
#### Post date: [April 11, 2021, 1:53am UTC](https://boards.straightdope.com/t/electrical-fan-wiring-question/939772/3 "2021-04-11T01:53:41Z")

</div>

That was a good idea, I didn’t find the exact set up but close enough for me to figure it out. I wasn’t allowing for a missing capacitor.
