# Finding the right drill

**URL:** <https://boards.straightdope.com/t/finding-the-right-drill/84025>\
**Category:** In My Humble Opinion\
**Created:** [September 27, 2001, 1:28am UTC](https://boards.straightdope.com/t/finding-the-right-drill/84025 "2001-09-27T01:28:58Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![Special\_Kay](https://avatars.discourse-cdn.com/v4/letter/s/4491bb/32.png) [@Special\_Kay](https://boards.straightdope.com/u/Special_Kay)\
**Post date:** [September 30, 2001, 2:38pm UTC](https://boards.straightdope.com/t/finding-the-right-drill/84025/21 "2001-09-30T14:38:23Z")

</div>

I get the corded drill thing. They are a hell of a lot lighter and fast. I need a drill that I can use while rapelling upside down 40 feet in the air over a theatre space, so I gotta have cordless. Although, the hybrid is an option, but not something I’ll pay for.

---

<div class="post-metadata">

**Author:** ![Klaatu](https://avatars.discourse-cdn.com/v4/letter/k/e0b2c6/32.png) [@Klaatu](https://boards.straightdope.com/u/Klaatu)\
**Post date:** [October 1, 2001, 12:51am UTC](https://boards.straightdope.com/t/finding-the-right-drill/84025/22 "2001-10-01T00:51:31Z")

</div>

I have to agree with the 18v DeWalt, at least for heavy duty work. I just finished a cedar fence job, and the big DeWalt flat blew away the 14v Skil and the 14v “off” brand we had.

As far as just drilling goes, I don’t know, this is just about screwing. 🙂 I assume you will use it for both.

Rough estimates:  
The DeWalt could drive over 600 1 5/8" screws and several dozen 3 1/4" screws w/o needing a battery change. The other two could a little more than half that. (YMMV)

While the DeWalt got kind of heavy in the hand after a few hours, it was much easier to bear down on to prevent the bit spinning on the screw head. Also, the torque settings were easier to control re: screwhead depth (too much or too little).

I don’t know if it was just the extra 4v that made the difference, but DeWalt gets my vote.

---

<div class="post-metadata">

**Author:** ![Special\_Kay](https://avatars.discourse-cdn.com/v4/letter/s/4491bb/32.png) [@Special\_Kay](https://boards.straightdope.com/u/Special_Kay)\
**Post date:** [October 8, 2001, 2:25pm UTC](https://boards.straightdope.com/t/finding-the-right-drill/84025/23 "2001-10-08T14:25:56Z")

</div>

Well, seems like 18v Dewalt is our winner. I guess it’s up to me to figure out if I need 18v or if I will soon enough to rationalize buying it now. I’m not a carpenter by trade, so I imagine 14.4 will hold me for quite sometime. It does occur to me that if I buy the 14.4, I’ll need 18, and if I buy the 18v, I’ll never need it.  
But, hey, I’ll have a cooler toy!

[Previous page](https://boards.straightdope.com/t/finding-the-right-drill/84025.md?page=1)
