# Gardeners: Working with Prune Seal

**URL:** <https://boards.straightdope.com/t/gardeners-working-with-prune-seal/718065>\
**Category:** Cafe Society\
**Created:** [April 19, 2015, 8:33pm UTC](https://boards.straightdope.com/t/gardeners-working-with-prune-seal/718065 "2015-04-19T20:33:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jinx](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@Jinx](https://boards.straightdope.com/u/Jinx)\
**Post date:** [April 19, 2015, 8:33pm UTC](https://boards.straightdope.com/t/gardeners-working-with-prune-seal/718065/1 "2015-04-19T20:33:57Z")

</div>

1. What is the best way to wash up after working with this stuff? About as much got on me as the tree I was pruning. 😉 While soap and water will work with a scrub brush, it takes time and doesn’t feel the greatest. What else will remove this stuff from skin?

2. What is the best way to clean the nozzle so the nozzle does and clog and/or seal itself shut. (I learned this the hard way.) I scraped the nozzle clean with a wire brush which is better than doing nothing, but…what else can be done to assure I don’t waste a whole can of this stuff?

3. Last, what can I do to salvage a clogged can of this stuff? Will turpentine do the trick? Anything else less messy? I hate working with turpentine (or, denatured alcohol or mineral spirits) because the vapors seems to linger on me. My wife is asthmatic, and these fumes/vapors affect her breathing.
