# Geometric question

**URL:** <https://boards.straightdope.com/t/geometric-question/118119>\
**Category:** Factual Questions\
**Created:** [July 9, 2002, 6:14pm UTC](https://boards.straightdope.com/t/geometric-question/118119 "2002-07-09T18:14:29Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zweistein](https://avatars.discourse-cdn.com/v4/letter/z/54ee81/32.png) [@Zweistein](https://boards.straightdope.com/u/Zweistein)\
**Post date:** [July 9, 2002, 6:14pm UTC](https://boards.straightdope.com/t/geometric-question/118119/1 "2002-07-09T18:14:29Z")

</div>

Imagine a membrane is attached in a ring.  
Then a weight is hanged exactly in the middle  
of the membrane.  
How is the resulting form of the membrane called ?

---

<div class="post-metadata">

**Author:** ![Squink](https://avatars.discourse-cdn.com/v4/letter/s/b5e925/32.png) [@Squink](https://boards.straightdope.com/u/Squink)\
**Post date:** [July 9, 2002, 11:54pm UTC](https://boards.straightdope.com/t/geometric-question/118119/2 "2002-07-09T23:54:11Z")

</div>

Possibly some variant on a catenary curve.  
[Catenary curves at Google](http://www.google.com/search?as_q=&num=10&hl=en&ie=ISO-8859-1&btnG=Google+Search&as_epq=catenary+curves&as_oq=&as_eq=&lr=&as_ft=i&as_filetype=&as_qdr=all&as_occt=any&as_dt=i&as_sitesearch=&safe=off)  
[Mathworld on Catenarys.](http://mathworld.wolfram.com/search/?words=catenary&x=12&y=7&config=scienceworld_wolfram_com&restrict=http%3A%2F%2Fmathworld.wolfram.com)

---

<div class="post-metadata">

**Author:** ![ultrafilter](https://avatars.discourse-cdn.com/v4/letter/u/3d9bf3/32.png) [@ultrafilter](https://boards.straightdope.com/u/ultrafilter)\
**Post date:** [July 10, 2002, 12:03am UTC](https://boards.straightdope.com/t/geometric-question/118119/3 "2002-07-10T00:03:31Z")

</div>

I’m pretty sure it’s a catenary.

---

<div class="post-metadata">

**Author:** ![g8rguy](https://avatars.discourse-cdn.com/v4/letter/g/7cd45c/32.png) [@g8rguy](https://boards.straightdope.com/u/g8rguy)\
**Post date:** [July 10, 2002, 12:53am UTC](https://boards.straightdope.com/t/geometric-question/118119/4 "2002-07-10T00:53:08Z")

</div>

I don’t think it’s a catenary as such. A catenary is the solution for a uniform mass distribution; what the OP describes seems to have a uniform mass distribution + a delta function in the middle. Shouldn’t that screw up the answer? I assume that the solution for a uniform 2D mass distribution constrained so that a particular ring is at a constant height (i.e. what the OP describes, without the weight in the middle) is a catenary of revolution, but I’m not even 100% sure that it’s true there.

---

<div class="post-metadata">

**Author:** ![Omphaloskeptic](https://avatars.discourse-cdn.com/v4/letter/o/bcef8e/32.png) [@Omphaloskeptic](https://boards.straightdope.com/u/Omphaloskeptic)\
**Post date:** [July 17, 2002, 6:33pm UTC](https://boards.straightdope.com/t/geometric-question/118119/5 "2002-07-17T18:33:36Z")

</div>

> [@](#):
>
> \*Originally posted by Zweistein \* **Imagine a membrane is attached in a ring. Then a mass M is hanged exactly in the middle of the membrane. How is the resulting form of the membrane called ?**

If the membrane has finite strength, then the weight can’t hang from a single point without breaking the membrane; instead I’ll specify that the weight is hung from a small ring in the center of the membrane. (Now the unstretched membrane occupies the annulus between the two coaxial rings.) If the membrane is assumed to be massless and isotropic, then the membrane’s surface tension T acts to minimize its total surface area between the two rings. The membrane’s surface in this case is a catenoid (the surface of revolution of a catenary); this can be found with variational calculus as shown [here](http://mathworld.wolfram.com/SurfaceofRevolution.html) (one of **Squink** ’s MathWorld links). (The radial function _z = f®_, giving the height of the membrane as a function of its radius, is actually the inverse catenary function, _f® = d acosh(r/d)_, where _d = M g / 2 pi T_.)

If the membrane is not massless, the equation is more complicated. For a membrane with constant mass per unit area m, variational calculus gives the differential equation _r z’’ = c r [1 + (z’)[sup]2[/sup]][sup]3/2[/sup] - z’ - (z’)[sup]3[/sup]_, where _c = m g / T_. Solving for _z’_ is not too difficult (make the substitution _z’ = tan sin[sup]-1[/sup] v_) but the resulting equation is too ugly for me to want to typeset it in HTML. I’m not sure if an elementary closed-form solution exists for _z_ in this case.

---

<div class="post-metadata">

**Author:** ![Chronos](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chronos/32/134_2.png) [@Chronos](https://boards.straightdope.com/u/Chronos)\
**Post date:** [July 17, 2002, 7:42pm UTC](https://boards.straightdope.com/t/geometric-question/118119/6 "2002-07-17T19:42:15Z")

</div>

We need to know the potential energy function for the membrane. **Omphaloskeptic** ’s result assumes that the energy is monotonic in the surface area, which is a reasonable assumption, but certainly not the only one possible. Further, he’s using the distance pulled down as a given, rather than the weight: We would need a more detailed form of the potential energy function, and the size of the outer ring, to determine how far it’s pulled down.

---

<div class="post-metadata">

**Author:** ![Omphaloskeptic](https://avatars.discourse-cdn.com/v4/letter/o/bcef8e/32.png) [@Omphaloskeptic](https://boards.straightdope.com/u/Omphaloskeptic)\
**Post date:** [July 17, 2002, 8:25pm UTC](https://boards.straightdope.com/t/geometric-question/118119/7 "2002-07-17T20:25:06Z")

</div>

> [@](#):
>
> \*Originally posted by Chronos \*  
> **We need to know the potential energy function for the membrane. Omphaloskeptic’s result assumes that the energy is monotonic in the surface area, which is a reasonable assumption, but certainly not the only one possible.**

Yeah, I assumed that the membrane’s potential energy _E = T A_, where _T_ is the surface tension. Other types of membranes exist, but I think this is a pretty common assumption for the energy of a thin elastic membrane. (But I haven’t done much with membranes, so I could easily be wrong.)

> [@](#):
>
> \*\*Further, he’s using the distance pulled down as a given, rather than the weight: We would need a more detailed form of the potential energy function, and the size of the outer ring, to determine how far it’s pulled down. \*\*

I wasn’t actually using the distance pulled down as a given; I was using the object’s weight _M g_ and the membrane’s surface tension _T_ (and the size of the two rings) as parameters. Variational calculus gives the solution in this case; the membrane height as a function of radius is, if I haven’t made any mistakes, _z = - d acosh (r/d)_, where _d = M g / 2 pi T_.
