# Heat pump question; external phone-like cable

**URL:** <https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697>\
**Category:** Factual Questions\
**Created:** [December 6, 2013, 7:31pm UTC](https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697 "2013-12-06T19:31:55Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![control-z](https://avatars.discourse-cdn.com/v4/letter/c/eada6e/32.png) [@control-z](https://boards.straightdope.com/u/control-z)\
**Post date:** [December 6, 2013, 7:31pm UTC](https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697/1 "2013-12-06T19:31:55Z")

</div>

I have an older Ruud heat pump. There is a wire going into it that looks like a phone-type cable, but it is broken and as far as I know has been for quite a while. What would this line do? The heat pump is old and noisy but works as expected and doesn’t use an unreasonable amount of electricity.

---

<div class="post-metadata">

**Author:** ![carnivorousplant](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/carnivorousplant/32/3563_2.png) [@carnivorousplant](https://boards.straightdope.com/u/carnivorousplant)\
**Post date:** [December 6, 2013, 8:00pm UTC](https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697/2 "2013-12-06T20:00:58Z")

</div>

Many years ago the power company here offered a rate discount if they could use a device to turn the A/C off for a few moments.  
At work, the vendor has a modem on A/C devices so they can monitor their condition.

---

<div class="post-metadata">

**Author:** ![control-z](https://avatars.discourse-cdn.com/v4/letter/c/eada6e/32.png) [@control-z](https://boards.straightdope.com/u/control-z)\
**Post date:** [December 6, 2013, 8:26pm UTC](https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697/3 "2013-12-06T20:26:31Z")

</div>

Wouldn’t that involve more than just one wire going into the heat pump?

---

<div class="post-metadata">

**Author:** ![carnivorousplant](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/carnivorousplant/32/3563_2.png) [@carnivorousplant](https://boards.straightdope.com/u/carnivorousplant)\
**Post date:** [December 6, 2013, 8:59pm UTC](https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697/4 "2013-12-06T20:59:14Z")

</div>

If it is phone like, it may have carried some signal between the heat pump and some external device.  
It may have been a temperature sensor somewhere outside.  
I’m hoping someone that knows more than I will show up. 🙂

---

<div class="post-metadata">

**Author:** ![Habeed](https://avatars.discourse-cdn.com/v4/letter/h/a587f6/32.png) [@Habeed](https://boards.straightdope.com/u/Habeed)\
**Post date:** [December 6, 2013, 9:35pm UTC](https://boards.straightdope.com/t/heat-pump-question-external-phone-like-cable/675697/5 "2013-12-06T21:35:20Z")

</div>

Take a photograph and post it here if you want a more certain answer.

You really should take a photograph of the plate on the side showing the model number. That would allow us to look up the electrical diagram for the heat pump.
