# How did the "page mode" work in CED video players?

**URL:** <https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487>\
**Category:** Factual Questions\
**Created:** [October 17, 2013, 3:09pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487 "2013-10-17T15:09:39Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Musicat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/musicat/32/20189_2.png) [@Musicat](https://boards.straightdope.com/u/Musicat)\
**Post date:** [October 17, 2013, 3:09pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/1 "2013-10-17T15:09:39Z")

</div>

This is a VERY esoteric question, but nerds are often bugged by such.

The [CED video player](https://en.wikipedia.org/wiki/Capacitance_Electronic_Disc#How_CEDs_work) was introduced in the 1980’s and was a competitor to VHS and Laser Disk video. It used a stylus riding in a spiral groove, making physical contact with a capacitive pickup. There was a track-following servo mechanism, a forerunner of the one used in CDs.

One disk revolution would read 4 frames of NTSC video (3 frames for PAL). Since RAM was relatively expensive in those days, a frame buffer for 3 or 4 frames was not affordable. Pausing was possible (the stylus lifted, the screen blanked), but freeze-frame was not. Yet players had a “page mode” where they would repeat the same 3 or 4 frames endlessly.

> [@](#):
>
> **Page Mode:** This refers to the playback condition where the stylus plays the same VideoDisc groove over and over. This results in the same four video frames being displayed over and over which approximately results in a still image if there was little movement in the original scene.

From [CED Player Specifications](http://www.cedmagic.com/museum/ced-player-guide/ced-player-specifications.html)

The only way I can conceive of this happening is if the stylus physically lifted each revolution and repositioned in the previous groove about 8 times a second. Sounds like a bad idea and very tricky to implement. Is this how it worked, or was there a better way?

---

<div class="post-metadata">

**Author:** ![JKilez](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@JKilez](https://boards.straightdope.com/u/JKilez)\
**Post date:** [October 17, 2013, 3:58pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/2 "2013-10-17T15:58:14Z")

</div>

From your own Wiki link:

> [@](#):
>
> In order to maintain an extremely light tracking force, the stylus arm is surrounded by coils which sense deflection, and a circuit in the player responds to the signals from these coils by moving the stylus head carriage in steps as the groove pulls the stylus across the disc. Other coils are used to deflect the stylus, to finely adjust tracking. This system is very similar to—yet predates—the one used in Compact Disc players to follow the spiral optical track, where typically a servo motor moves the optical pickup in steps for coarse tracking and a set of coils tilts the laser lens for fine tracking, both guided by an optical sensing device which is the analogue of CED stylus deflection sensing coils.

I know nothing about CED players, but it seems quite reasonable that in “page mode”, they would just use the servos to keep the stylus in place and have it more or less skip. It may not have the best for the disc, but for short periods, it would not make a difference. Remember, using the “pause” button on VCRs causes the read head to continuously rotate against one section of tape (to its long term detriment).

---

<div class="post-metadata">

**Author:** ![Habeed](https://avatars.discourse-cdn.com/v4/letter/h/a587f6/32.png) [@Habeed](https://boards.straightdope.com/u/Habeed)\
**Post date:** [October 17, 2013, 4:29pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/3 "2013-10-17T16:29:29Z")

</div>

If you read the paragraph right after, it states that a mechanism to skip forward and backwards between groves is in all the players that do page mode. Apparently, it is in fact picking up the style a little and moving over 1, just like you thought.

---

<div class="post-metadata">

**Author:** ![Habeed](https://avatars.discourse-cdn.com/v4/letter/h/a587f6/32.png) [@Habeed](https://boards.straightdope.com/u/Habeed)\
**Post date:** [October 17, 2013, 4:52pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/4 "2013-10-17T16:52:20Z")

</div>

Just read about CED players for the last 30 minutes. There has to be a mechanism to pick the stylus up and another mechanism to move the carrier containing the stylus around, or the player itself would not work. So, this “page mode” can be added to a player merely with additional control circuitry to drive it.

The tradeoff matrix for them was

- Lower cost to manufacture the players and the disks vs vhs/laserdisk/betamax at the time.

- Could not record to the disks
- Inferior video quality compared to laserdisk, the other playback-only format. Also, the disks would degrade with each viewing, while laserdisks won’t.

---

<div class="post-metadata">

**Author:** ![Musicat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/musicat/32/20189_2.png) [@Musicat](https://boards.straightdope.com/u/Musicat)\
**Post date:** [October 17, 2013, 5:01pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/5 "2013-10-17T17:01:56Z")

</div>

As an engineering concept, a forced 1-track skip sounds like a bad idea. Think of the damage done to a vinyl LP when that happens. Of course, vinyl is softer and the stylus pressure greater on an LP. I wonder if the manual ever warned users to avoid staying in that mode for long.

I remember when that player came out. I thought the whole idea of a physical tracking device pretty retro when lasers were already being used, so it was never on my Christmas “must-buy list.”

---

<div class="post-metadata">

**Author:** ![Musicat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/musicat/32/20189_2.png) [@Musicat](https://boards.straightdope.com/u/Musicat)\
**Post date:** [October 17, 2013, 5:07pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/6 "2013-10-17T17:07:55Z")

</div>

> [@Habeed](#):
>
> If you read the paragraph right after, it states that a mechanism to skip forward and backwards between groves is in all the players that do page mode. Apparently, it is in fact picking up the style a little and moving over 1, just like you thought.

Yes, I saw that, but pressing a button and having the stylus lift and shift doesn’t sound like it had to be accomplished in 1/8 second, while the “staying in place” mode has to happen fast and repeatedly, and the higher the stylus was lifted, the longer it would take; the less it was lifted, the more potential for damage. Maybe the servo was just sophisticated enough.

---

<div class="post-metadata">

**Author:** ![Capt\_Kirk](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@Capt\_Kirk](https://boards.straightdope.com/u/Capt_Kirk)\
**Post date:** [October 17, 2013, 5:18pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/7 "2013-10-17T17:18:36Z")

</div>

I own one of these and mine does not have that function, I wish it did. Mine is cranky and works about half the time but I do love it, crappy picture and all.

**Capt**

---

<div class="post-metadata">

**Author:** ![JKilez](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@JKilez](https://boards.straightdope.com/u/JKilez)\
**Post date:** [October 17, 2013, 5:35pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/8 "2013-10-17T17:35:24Z")

</div>

> [@Musicat](#):
>
> As an engineering concept, a forced 1-track skip sounds like a bad idea. Think of the damage done to a vinyl LP when that happens. Of course, vinyl is softer and the stylus pressure greater on an LP. I wonder if the manual ever warned users to avoid staying in that mode for long.

As you note, the tracking force on CEDs is much less and they do not actually use the groove sides for information, but for tracking. Since VCRs already had the problem of damaging tapes when left in pause, I do not think most people at the time would consider it a defect if CEDs were similar.

---

<div class="post-metadata">

**Author:** ![Isilder](https://avatars.discourse-cdn.com/v4/letter/i/cc9497/32.png) [@Isilder](https://boards.straightdope.com/u/Isilder)\
**Post date:** [October 18, 2013, 4:00am UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/9 "2013-10-18T04:00:25Z")

</div>

> [@Musicat](#):
>
> The only way I can conceive of this happening is if the stylus physically lifted each revolution and repositioned in the previous groove about 8 times a second. Sounds like a bad idea and very tricky to implement. Is this how it worked, or was there a better way?

The description you quoted makes it quite clear that is how it worked.  
Despite being digital, They did not store even one frame in RAM, they pushed the bits of info out to the video output just as soon as they read them, and so the only way to freeze-frame pause is to physically skip back one groove.

---

<div class="post-metadata">

**Author:** ![Musicat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/musicat/32/20189_2.png) [@Musicat](https://boards.straightdope.com/u/Musicat)\
**Post date:** [October 18, 2013, 12:14pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/10 "2013-10-18T12:14:09Z")

</div>

> [@Isilder](#):
>
> Despite being digital, They did not store even one frame in RAM, they pushed the bits of info out to the video output just as soon as they read them, and so the only way to freeze-frame pause is to physically skip back one groove.

It wasn’t digital,

> [@](#):
>
> The video and audio signals are stored on the Videodiscs in a composite analog signal

so there were no “bits”.

---

<div class="post-metadata">

**Author:** ![Sparky812](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@Sparky812](https://boards.straightdope.com/u/Sparky812)\
**Post date:** [October 18, 2013, 1:20pm UTC](https://boards.straightdope.com/t/how-did-the-page-mode-work-in-ced-video-players/671487/11 "2013-10-18T13:20:27Z")

</div>

Wow! We had one of those back in 81 or 82, it didn’t last long and alot of movies weren’t really available.

> [@Musicat](#):
>
> It wasn’t digital,so there were no “bits”.

Oh yeah? I wore out our copy of Airplane!, Saturn 3, and Last Tango in Paris by pausing all the nude “bits” 😃

I don’t think the stylus is actually picked up at all. My understanding is that the paging simply locked the tracking carriage in one position forcing the stylus to repeat same 3 or 4 frames in that revolution then “skip” back into the same groove.  
The stylus is simply permitted to “ride” over the ridge into the previous groove.

The light tracking force controlled by an array of sensors, deflection coils, etc., plus the keel-shaped stylus and its tangent all would minimize any physical damage.

The information is at the bottom of the groove so the only possible damage would be to the ridges or the titanium stylus.  
I suppose wear could occur if paused for a extended period but normal usage would be for short periods and unlikely to occur exactly in the same precise spots on the disk.

Unless, of course, those 3 or 4 frames are of Boobies!
