# How do I compress this spring/shock assembly?

**URL:** <https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905>\
**Category:** Factual Questions\
**Created:** [August 10, 2013, 10:37pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905 "2013-08-10T22:37:24Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Crafter\_Man](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/crafter_man/32/458_2.png) [@Crafter\_Man](https://boards.straightdope.com/u/Crafter_Man)\
**Post date:** [August 10, 2013, 10:37pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/1 "2013-08-10T22:37:24Z")

</div>

I bought our son a go kart, and am in the process of assembling it. It has a full suspension (springs & shocks on front and rear).

[Here](http://i1103.photobucket.com/albums/g471/ohio_rifleman/Slide1-3.jpg) [are](http://i1103.photobucket.com/albums/g471/ohio_rifleman/Slide2-3.jpg) a couple pics of what the go kart should look like when I am finished assembling it. You can plainly see the rear spring/shock assemblies in these pics.

At any rate, I can’t install the rear spring/shock assemblies because they’re uncompressed and too long! I need to compress them a couple inches before I install them. I tried compressing them by hand, but they’re way too stiff.

To give you an idea of their size, [here](http://i1103.photobucket.com/albums/g471/ohio_rifleman/SDC10026.jpg) [are](http://i1103.photobucket.com/albums/g471/ohio_rifleman/SDC10025.jpg) a couple pics I took for one of them.

I went to Auto Zone and Advance Auto Parts this afternoon to see if I could buy or rent a spring compression tool. But the ones they had were for cars & trucks, and they were too big.

Is there a spring compression tool I can buy (or make?) for small spring/shock assemblies such as these? I did some google searching but came up empty-handed.

---

<div class="post-metadata">

**Author:** ![aNewLeaf](https://avatars.discourse-cdn.com/v4/letter/a/ac91a4/32.png) [@aNewLeaf](https://boards.straightdope.com/u/aNewLeaf)\
**Post date:** [August 10, 2013, 10:39pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/2 "2013-08-10T22:39:33Z")

</div>

Would a long woodworking clamp work with the space you have?

---

<div class="post-metadata">

**Author:** ![leftfield6](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/leftfield6/32/18780_2.png) [@leftfield6](https://boards.straightdope.com/u/leftfield6)\
**Post date:** [August 10, 2013, 10:47pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/3 "2013-08-10T22:47:27Z")

</div>

You need to find [one of these.](http://liftyourxj.com/assets/SpringCompressors1.JPG) Designed for cars, obviously, but will work for any size spring.

---

<div class="post-metadata">

**Author:** ![Rick](https://avatars.discourse-cdn.com/v4/letter/r/9f8e36/32.png) [@Rick](https://boards.straightdope.com/u/Rick)\
**Post date:** [August 10, 2013, 10:48pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/4 "2013-08-10T22:48:22Z")

</div>

Get two or three large worm drive clamps (like hose clamps only BIG)  
Wrap them through the spring and tighten. It will be easier if you can compress them spring at least partially first.

---

<div class="post-metadata">

**Author:** ![PastTense](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/pasttense/32/14550_2.png) [@PastTense](https://boards.straightdope.com/u/PastTense)\
**Post date:** [August 10, 2013, 10:49pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/5 "2013-08-10T22:49:22Z")

</div>

Can you jack it up and this video suggests:

[![](https://img.youtube.com/vi/m3XJhOf0Chg/maxresdefault.jpg "How to Build a Go Kart - 20 - Rear Struts (the easy way)") ](https://www.youtube.com/watch?v=m3XJhOf0Chg)

---

<div class="post-metadata">

**Author:** ![Rick](https://avatars.discourse-cdn.com/v4/letter/r/9f8e36/32.png) [@Rick](https://boards.straightdope.com/u/Rick)\
**Post date:** [August 10, 2013, 10:49pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/6 "2013-08-10T22:49:25Z")

</div>

> [@leftfield6](#):
>
> You need to find [one of these.](http://liftyourxj.com/assets/SpringCompressors1.JPG) Designed for cars, obviously, but will work for any size spring.

That will be way too big. Won’t work.

---

<div class="post-metadata">

**Author:** ![Crafter\_Man](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/crafter_man/32/458_2.png) [@Crafter\_Man](https://boards.straightdope.com/u/Crafter_Man)\
**Post date:** [August 11, 2013, 12:17am UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/7 "2013-08-11T00:17:16Z")

</div>

Thanks for the replies. But now I feel like a total moron.

The go kart is up on blocks. Was checking things out, and I noticed there was a steel bar installed in the place of one of the rear spring/shock assemblies. (I assume they did this for shipping.) I removed the steel bar and - not surprisingly - the whole rear end swung down! :smack: I then easily installed each spring/shock assembly. 🙂 I can’t believe I didn’t notice it before. Feel real dumb about it.

---

<div class="post-metadata">

**Author:** ![Rick](https://avatars.discourse-cdn.com/v4/letter/r/9f8e36/32.png) [@Rick](https://boards.straightdope.com/u/Rick)\
**Post date:** [August 11, 2013, 12:50pm UTC](https://boards.straightdope.com/t/how-do-i-compress-this-spring-shock-assembly/665905/8 "2013-08-11T12:50:17Z")

</div>

🙂
