# How to decipher these lumberyard price list terms?

**URL:** <https://boards.straightdope.com/t/how-to-decipher-these-lumberyard-price-list-terms/681332>\
**Category:** Factual Questions\
**Created:** [February 14, 2014, 3:55pm UTC](https://boards.straightdope.com/t/how-to-decipher-these-lumberyard-price-list-terms/681332 "2014-02-14T15:55:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zombywoof](https://avatars.discourse-cdn.com/v4/letter/z/9e8a1a/32.png) [@zombywoof](https://boards.straightdope.com/u/zombywoof)\
**Post date:** [February 14, 2014, 3:55pm UTC](https://boards.straightdope.com/t/how-to-decipher-these-lumberyard-price-list-terms/681332/1 "2014-02-14T15:55:52Z")

</div>

I am looking at a hardwood lumber product sheet from a local lumberyard, and am wondering what the following sort of terms mean.

I understand 4/4 = 1" thick, 5/4 = 1-1/4" thick, etc., and that these are nominal dimensions for rough lumber - if it is surfaced on 2 or 4 sides (S2S, S4S) it is somewhat thinner, correct?

How about the following terms?

4/4 S&B

4/4 FEQ

4/4 FAS

4/4 RIFT

4/4 QTR

5/4 #1C / HoM 15/16"

8/4 S&B / Rough

4/4 S&B (90/90 Color Sort)

1x4 C & BTR

---

<div class="post-metadata">

**Author:** ![Colophon](https://avatars.discourse-cdn.com/v4/letter/c/f05b48/32.png) [@Colophon](https://boards.straightdope.com/u/Colophon)\
**Post date:** [February 14, 2014, 5:30pm UTC](https://boards.straightdope.com/t/how-to-decipher-these-lumberyard-price-list-terms/681332/2 "2014-02-14T17:30:19Z")

</div>

S&B means “Select and Better” i.e., I believe, a good grade of timber free of visible defects, so suitable for more decorative uses rather than just structural.

FEQ = First European Quality.

FAS = “Firsts and Seconds” - i.e. the top two grades, similar I think to S&B.

I assume RIFT and QTR refer to [rift-sawn](http://en.wikipedia.org/wiki/Rift_sawing) and [quarter-sawn](http://en.wikipedia.org/wiki/Quarter_sawing) boards.

BTR just means “better”, so “C & BTR” is “Grade C and better”.

Not sure about HoM.

---

<div class="post-metadata">

**Author:** ![engineer\_comp\_geek](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/engineer_comp_geek/32/504_2.png) [@engineer\_comp\_geek](https://boards.straightdope.com/u/engineer_comp_geek)\
**Post date:** [February 14, 2014, 7:48pm UTC](https://boards.straightdope.com/t/how-to-decipher-these-lumberyard-price-list-terms/681332/3 "2014-02-14T19:48:36Z")

</div>

> [@zombywoof](#):
>
> 5/4 #1C / HoM 15/16"

HoM = Hit or Miss planing, which is also abbreviated H/M

Since it is planed it will be 1/16" thinner than rough stock.
