# I finished a model, a Mechanical Mole!

**URL:** <https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708>\
**Category:** Cafe Society\
**Created:** [August 28, 2014, 12:29am UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708 "2014-08-28T00:29:06Z")\
**Posts on this page:** 8\
**Page:** 2

<div class="post-metadata">

**Author:** ![Miller](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/miller/32/481_2.png) [@Miller](https://boards.straightdope.com/u/Miller)\
**Post date:** [August 28, 2014, 11:43pm UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/21 "2014-08-28T23:43:47Z")

</div>

> [@Rocketeer](#):
>
> Also, appropos of nothing:
> 
> [Dunkirk mole](http://en.wikipedia.org/wiki/File:East_Mole_Dunkirk.jpg)
> 
> [Another kind of mole 😉](http://en.wikipedia.org/wiki/File:Mata_Hari_2.jpg)

[And another.](http://en.wikipedia.org/wiki/Hugo_von_Mohl)

---

<div class="post-metadata">

**Author:** ![dougie\_monty](https://avatars.discourse-cdn.com/v4/letter/d/439d5e/32.png) [@dougie\_monty](https://boards.straightdope.com/u/dougie_monty)\
**Post date:** [August 29, 2014, 3:26am UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/22 "2014-08-29T03:26:38Z")

</div>

> [@simster](#):
>
> that makes zero sense -

Probably; but, wasn’t it funny? 😃

---

<div class="post-metadata">

**Author:** ![GaryM](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/garym/32/241_2.png) [@GaryM](https://boards.straightdope.com/u/GaryM)\
**Post date:** [August 29, 2014, 3:58am UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/23 "2014-08-29T03:58:05Z")

</div>

Wonderful looking project. Be sure to post photos of the other tiles.

---

<div class="post-metadata">

**Author:** ![Magiver](https://avatars.discourse-cdn.com/v4/letter/m/4491bb/32.png) [@Magiver](https://boards.straightdope.com/u/Magiver)\
**Post date:** [August 30, 2014, 2:19am UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/24 "2014-08-30T02:19:35Z")

</div>

I would go to a train show just to see your menagerie on display.

---

<div class="post-metadata">

**Author:** ![Isamu](https://avatars.discourse-cdn.com/v4/letter/i/7c8e57/32.png) [@Isamu](https://boards.straightdope.com/u/Isamu)\
**Post date:** [September 2, 2014, 3:36am UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/25 "2014-09-02T03:36:01Z")

</div>

Great model dude! I want to see the rest. Also, it would be really cool to hear how each part was made (for example how did you make the auger?)

---

<div class="post-metadata">

**Author:** ![Rocketeer](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/rocketeer/32/4437_2.png) [@Rocketeer](https://boards.straightdope.com/u/Rocketeer)\
**Post date:** [September 2, 2014, 5:39pm UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/26 "2014-09-02T17:39:32Z")

</div>

> [@Isamu](#):
>
> …for example how did you make the auger?

I try not to bore my audience too much. 😉

The auger is the nose section of a Pegasus “Apollo 27” spaceship kit. The tricky part was the spiral; I’m pretty proud of my solution for doing that.

I had originally thought about trying to curve a strip of styrene into a spiral, then gluing it on, but I wanted the spiral “blade” to be at least 0.125 wide, and of course, trying to bend a 0.040 x 0.125 strip edgewise without kinking it would be practically impossible. Then I thought about cutting C-shapes out of styrene sheet, but connecting the end of one “C” to the next smoothly was going to be a problem.

So what I finally did was glue a strip of 0.040 x 0.040 spiraling around the cone, using dividers to check that my pitch was constant; the small strip was easy to bend. I then used a file to dress the top of the strip so that it was parallel to the axis of the cone, and then glued another 0.040 x 0.040 strip on top of the original one. And then another on top of that; by now the spiral “blade” was 0.120 wide. One last strip on top and the blade was 0.160 wide; I waited for the whole thing to dry thoroughly and then tidied up the sides of the blade with a bit of putty and some sanding, and voila!

Surprisingly little trouble. 😃

…but not the most exciting thing to read about, and practically meaningless to anyone who hasn’t messed with plastic models. :rolleyes:

---

<div class="post-metadata">

**Author:** ![August\_West](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/august_west/32/18069_2.png) [@August\_West](https://boards.straightdope.com/u/August_West)\
**Post date:** [October 15, 2014, 6:13pm UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/27 "2014-10-15T18:13:04Z")

</div>

Hey! It’s well past late September, where are our updates with new pictures? 😉

---

<div class="post-metadata">

**Author:** ![Rocketeer](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/rocketeer/32/4437_2.png) [@Rocketeer](https://boards.straightdope.com/u/Rocketeer)\
**Post date:** [October 15, 2014, 8:53pm UTC](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708/28 "2014-10-15T20:53:32Z")

</div>

[They’re here! They’re here!](http://boards.straightdope.com/sdmb/showthread.php?t=735634)

308 views and no replies. 😕 Hmmmmm. A bit disheartening. :dubious:

[Previous page](https://boards.straightdope.com/t/i-finished-a-model-a-mechanical-mole/696708.md?page=1)
