# I need to buy a servo.  What type?

**URL:** <https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606>\
**Category:** Factual Questions\
**Created:** [August 7, 2013, 5:23pm UTC](https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606 "2013-08-07T17:23:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![blood63](https://avatars.discourse-cdn.com/v4/letter/b/97f17d/32.png) [@blood63](https://boards.straightdope.com/u/blood63)\
**Post date:** [August 7, 2013, 5:23pm UTC](https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606/1 "2013-08-07T17:23:41Z")

</div>

This is the same building project as my DPDT switch from earlier for which I got great help.  
I need to buy a servo to move an arm. There seem to be a wide variety of servos out there from 5$ to $500 dollar.  
It will run off a 3 V supply. The mass it is moving is negligible. The slower the speed the better.  
What specs am I looking for?

---

<div class="post-metadata">

**Author:** ![ducati](https://avatars.discourse-cdn.com/v4/letter/d/cc9497/32.png) [@ducati](https://boards.straightdope.com/u/ducati)\
**Post date:** [August 8, 2013, 3:05am UTC](https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606/2 "2013-08-08T03:05:05Z")

</div>

[Most of these want 4.8v](http://search2.hobby-lobby.com/psearch/svc/search.php?uid=2&q=servo&x=0&y=0) or more, but 3 may work, and be slower than spec to boot.

Maybe give them a call.

---

<div class="post-metadata">

**Author:** ![TriPolar](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tripolar/32/3008_2.png) [@TriPolar](https://boards.straightdope.com/u/TriPolar)\
**Post date:** [August 8, 2013, 3:27am UTC](https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606/3 "2013-08-08T03:27:35Z")

</div>

I agree that RC servos are just what you need, but you can shop at other places.

---

<div class="post-metadata">

**Author:** ![Dr.Strangelove](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/dr.strangelove/32/6613_2.png) [@Dr.Strangelove](https://boards.straightdope.com/u/Dr.Strangelove)\
**Post date:** [August 8, 2013, 3:59am UTC](https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606/4 "2013-08-08T03:59:43Z")

</div>

> [@ducati](#):
>
> [Most of these want 4.8v](http://search2.hobby-lobby.com/psearch/svc/search.php?uid=2&q=servo&x=0&y=0) or more, but 3 may work, and be slower than spec to boot.
> 
> Maybe give them a call.

[Hobby King](http://www.hobbyking.com/hobbyking/store/RC_PRODUCT_SEARCH.asp?strSearch=servo) is likely to have better prices. But yeah, they run off of ~5 v.

RC servos can be a little tricky to drive–they require a very specific PWM signal. Depending on the circuit, it may be possible to use a [servo tester](http://www.hobbyking.com/hobbyking/store/ __18309__ Hobbyking_LED_Servo_Tester.html) to drive one.

---

<div class="post-metadata">

**Author:** ![engineer\_comp\_geek](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/engineer_comp_geek/32/504_2.png) [@engineer\_comp\_geek](https://boards.straightdope.com/u/engineer_comp_geek)\
**Post date:** [August 8, 2013, 5:06am UTC](https://boards.straightdope.com/t/i-need-to-buy-a-servo-what-type/665606/5 "2013-08-08T05:06:11Z")

</div>

How much current can your 3 volt supply handle? It may be cheapest/easiest to get a 3V to 5V converter and use that to power the servo. That would allow you to use much more common (and inexpensive) servos like the RC types that have been mentioned in this thread.
