# immersion of electric humidifer motor

**URL:** <https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252>\
**Category:** Factual Questions\
**Created:** [January 5, 2005, 6:53pm UTC](https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252 "2005-01-05T18:53:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![rainy](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@rainy](https://boards.straightdope.com/u/rainy)\
**Post date:** [January 5, 2005, 6:53pm UTC](https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252/1 "2005-01-05T18:53:20Z")

</div>

The set-up; a humidifier with mold growing all around the fan and motor housing in a location that will be next to impossible to clean.

The question; Can I immerse the entire motor housing, and thus the motor, in a water / chlorine bath (obviously unplugged). Then pull it out, allow it to air dry completely, and it still work?

Advice is greatly appreciated.

-rainy

---

<div class="post-metadata">

**Author:** ![Squink](https://avatars.discourse-cdn.com/v4/letter/s/b5e925/32.png) [@Squink](https://boards.straightdope.com/u/Squink)\
**Post date:** [January 5, 2005, 7:28pm UTC](https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252/2 "2005-01-05T19:28:01Z")

</div>

Bleach is nasty, corrosive stuff. Applying it to the thin insulation of motor windings is asking for trouble.

---

<div class="post-metadata">

**Author:** ![Gary\_T](https://avatars.discourse-cdn.com/v4/letter/g/3ec8ea/32.png) [@Gary\_T](https://boards.straightdope.com/u/Gary_T)\
**Post date:** [January 5, 2005, 8:05pm UTC](https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252/3 "2005-01-05T20:05:17Z")

</div>

Denatured alcohol might work.

---

<div class="post-metadata">

**Author:** ![kanicbird](https://avatars.discourse-cdn.com/v4/letter/k/5f8ce5/32.png) [@kanicbird](https://boards.straightdope.com/u/kanicbird)\
**Post date:** [January 5, 2005, 8:25pm UTC](https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252/4 "2005-01-05T20:25:19Z")

</div>

I have immeresed electronics including motors in water (actually including a keyboard that I spilt cola in) that didn’t suffer any ill effects. As stated bleach is corrosive and will take it’s toll.

---

<div class="post-metadata">

**Author:** ![rainy](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@rainy](https://boards.straightdope.com/u/rainy)\
**Post date:** [January 6, 2005, 2:33pm UTC](https://boards.straightdope.com/t/immersion-of-electric-humidifer-motor/283252/5 "2005-01-06T14:33:13Z")

</div>

Thanks for steering me away from the bleach.
