# Installing overhead lighting—lighting calculator/help on the net?

**URL:** <https://boards.straightdope.com/t/installing-overhead-lighting-lighting-calculator-help-on-the-net/659466>\
**Category:** Factual Questions\
**Created:** [May 27, 2013, 4:07pm UTC](https://boards.straightdope.com/t/installing-overhead-lighting-lighting-calculator-help-on-the-net/659466 "2013-05-27T16:07:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rhythmdvl](https://avatars.discourse-cdn.com/v4/letter/r/85f322/32.png) [@Rhythmdvl](https://boards.straightdope.com/u/Rhythmdvl)\
**Post date:** [May 27, 2013, 4:07pm UTC](https://boards.straightdope.com/t/installing-overhead-lighting-lighting-calculator-help-on-the-net/659466/1 "2013-05-27T16:07:33Z")

</div>

I’m installing a handful of overhead fluorescent fixtures in the basement to light a woodshop and a planting area. There’re a few corners, odd shapes and a protuberance or two. I could wing it, but since it’s a week or two between times I can work down there, I have a lot of thinking time on my hands.

I’m assuming that there are known levels and guidelines for these sorts of things. As in a 4’ T-8 fixture with two bulbs will create a rectangular cone\* X\*’ wide by _Y_’ long at a height of _Z_. I’m assuming there are also guidelines for how far apart you want them to avoid blinding brilliance, shadow pockets, etc.

I get that there will be some variance (e.g. unfinished concrete floor v. white tile), but general help would be great. What I’d really like is to find some sort of Flash/HTML5 calculator of sorts that will help with trying out different orientations, numbers, etc.

Is there anything close?

---

<div class="post-metadata">

**Author:** ![samclem](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@samclem](https://boards.straightdope.com/u/samclem)\
**Post date:** [June 2, 2013, 11:22am UTC](https://boards.straightdope.com/t/installing-overhead-lighting-lighting-calculator-help-on-the-net/659466/2 "2013-06-02T11:22:18Z")

</div>

Bump.

---

<div class="post-metadata">

**Author:** ![Isilder](https://avatars.discourse-cdn.com/v4/letter/i/cc9497/32.png) [@Isilder](https://boards.straightdope.com/u/Isilder)\
**Post date:** [June 2, 2013, 12:07pm UTC](https://boards.straightdope.com/t/installing-overhead-lighting-lighting-calculator-help-on-the-net/659466/3 "2013-06-02T12:07:11Z")

</div>

Its the info provided with the diffuser…

eg

> **[Home Page | Pierlite](https://pierlite.com.au/)**
>
> From technically sophisticated systems to architecturally creative luminaires our products are designed to meet the needs of a huge range of

Then click performance.

---

<div class="post-metadata">

**Author:** ![Jman](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/jman/32/4416_2.png) [@Jman](https://boards.straightdope.com/u/Jman)\
**Post date:** [June 3, 2013, 2:26pm UTC](https://boards.straightdope.com/t/installing-overhead-lighting-lighting-calculator-help-on-the-net/659466/4 "2013-06-03T14:26:50Z")

</div>

You want a photometric analysis tool. Unfortunately, they cost some cash. I’m an electrical engineer and I do a lot of lighting, though. If you want to post a sketch of the area and how many lights you’re thinking, I can probably whip up a photometric calculation for you.
