# Is there a name for this test methodology where we start with simple tests and proceed to more comp?

**URL:** <https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144>\
**Category:** Factual Questions\
**Created:** [December 26, 2012, 2:01am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144 "2012-12-26T02:01:23Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dog80](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@Dog80](https://boards.straightdope.com/u/Dog80)\
**Post date:** [December 26, 2012, 2:01am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/1 "2012-12-26T02:01:23Z")

</div>

Is there a name for this test methodology where we start with simple tests and then proceed to more complex ones?

Sometimes there’s a quick and dirty test, that while not accurate, it can rule out certain possibilities and depending on the outcome we can proceed using other more accurate methods or abandon the test altogether.

For example, testing a car battery with a multimeter is inaccurate, because there are cases where it can show full voltage and yet the battery cannot hold any charge. However the first thing every technician does is to stick a multimeter on the battery, because if it shows some ridiculously low voltage then we know for sure that the battery is dead and there’s no need to do any further testing, eg with a carbon pile load tester.

Is there a name for this escalation of testing?

---

<div class="post-metadata">

**Author:** ![Ethilrist](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/ethilrist/32/4604_2.png) [@Ethilrist](https://boards.straightdope.com/u/Ethilrist)\
**Post date:** [December 26, 2012, 2:09am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/2 "2012-12-26T02:09:43Z")

</div>

“separating the wheat from the chaff?”

---

<div class="post-metadata">

**Author:** ![the\_diego](https://avatars.discourse-cdn.com/v4/letter/t/7bcc69/32.png) [@the\_diego](https://boards.straightdope.com/u/the_diego)\
**Post date:** [December 26, 2012, 2:22am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/3 "2012-12-26T02:22:02Z")

</div>

Funny, I learned a lot of procedures in science that do that but I never came across a term to describe it. In marketing, it’s called “funneling down.” The closest I can think of is in qualitative chemistry: dissociation (meaning separation, not to be confused with the other term in chemistry ‘dissociation’ which is when compounds in solution split into smaller particles.)

---

<div class="post-metadata">

**Author:** ![deltasigma](https://avatars.discourse-cdn.com/v4/letter/d/e5b9ba/32.png) [@deltasigma](https://boards.straightdope.com/u/deltasigma)\
**Post date:** [December 26, 2012, 2:53am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/4 "2012-12-26T02:53:59Z")

</div>

A sieve - since the simple tests tend to be less refined and give only gross results?

---

<div class="post-metadata">

**Author:** ![Senegoid](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/senegoid/32/6606_2.png) [@Senegoid](https://boards.straightdope.com/u/Senegoid)\
**Post date:** [December 26, 2012, 3:14am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/5 "2012-12-26T03:14:34Z")

</div>

Perhaps “breadth first” as opposed to “depth first” testing.

“Breadth first” meaning that you do superficial and perfunctory tests first that can potentially detect (or reject) a wide variety of cases, and only then proceed to do the more detailed tests needed for a few conditions that the preliminary tests indicated.

As opposed to “depth first” testing, where you would make some initial guesses (based on the initial presentation) of where the problem may lie, and then start by doing detailed (“in-depth”) testing for the cases you guessed at. You are gambling that your initial guesses will be right, and you are investing a lot of effort in those guesses. If that works out, you win. If not, you are out your investment in the testing effort you did, and you have to start over at Square One with a different guess.

---

<div class="post-metadata">

**Author:** ![HoneyBadgerDC](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/honeybadgerdc/32/1033_2.png) [@HoneyBadgerDC](https://boards.straightdope.com/u/HoneyBadgerDC)\
**Post date:** [December 26, 2012, 3:31am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/6 "2012-12-26T03:31:24Z")

</div>

Most guys refer to it as process of elimination. I usually do start with quick and dirty tests on a truck just to get an idea where I am at.

---

<div class="post-metadata">

**Author:** ![Darth\_Panda](https://avatars.discourse-cdn.com/v4/letter/d/ee7513/32.png) [@Darth\_Panda](https://boards.straightdope.com/u/Darth_Panda)\
**Post date:** [December 26, 2012, 3:34am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/7 "2012-12-26T03:34:36Z")

</div>

Troubleshooting

> [@](#):
>
> A basic principle in troubleshooting is to start from the simplest and most probable possible problems first. This is illustrated by the old saying “When you see hoof prints, look for horses, not zebras”, or to use another maxim, use the KISS principle. This principle results in the common complaint about help desks or manuals, that they sometimes first ask: “Is it plugged in and does that receptacle have power?”, but this should not be taken as an affront, rather it should serve as a reminder or conditioning to always check the simple things first before calling for help.

> **[Troubleshooting](https://en.wikipedia.org/wiki/Troubleshooting)**
>
> Troubleshooting is a form of problem solving, often applied to repair failed products or processes on a machine or a system. It is a logical, systematic search for the source of a problem in order to solve it, and make the product or process operational again. Troubleshooting is needed to identify the symptoms. Determining the most likely cause is a process of elimination—eliminating potential causes of a problem. Finally, troubleshooting requires confirmation that the solution restores the p...

---

<div class="post-metadata">

**Author:** ![johnpost](https://avatars.discourse-cdn.com/v4/letter/j/f17d59/32.png) [@johnpost](https://boards.straightdope.com/u/johnpost)\
**Post date:** [December 26, 2012, 3:37am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/8 "2012-12-26T03:37:23Z")

</div>

process

in science you might follow a process to identify something from its characteristics. these might be visual observations or tests. you would follow what could be displayed on a flow chart.

similar for technical problems like electricity, electronics, fluid flow you would do observations and tests to identify a problem.

---

<div class="post-metadata">

**Author:** ![the\_diego](https://avatars.discourse-cdn.com/v4/letter/t/7bcc69/32.png) [@the\_diego](https://boards.straightdope.com/u/the_diego)\
**Post date:** [December 26, 2012, 3:59am UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/9 "2012-12-26T03:59:04Z")

</div>

Hey, I like the term ‘process.’

In microscopy: from low magnification to high magnification, from simple observation to complex observation

In technical charting: from medium- horizon to short term, from simple chart patterns to oscillation and stochastics.

In mineralogy: segregate metallic from non-metallic, then each group by color, spec gravity texture, cleavage, streak, other diagnostic features.

---

<div class="post-metadata">

**Author:** ![Smeghead](https://avatars.discourse-cdn.com/v4/letter/s/f1d935/32.png) [@Smeghead](https://boards.straightdope.com/u/Smeghead)\
**Post date:** [December 26, 2012, 3:34pm UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/10 "2012-12-26T15:34:00Z")

</div>

In medicine, you’d do a screening test followed by a diagnostic test along those principles.

---

<div class="post-metadata">

**Author:** ![Enright3](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/enright3/32/2897_2.png) [@Enright3](https://boards.straightdope.com/u/Enright3)\
**Post date:** [December 26, 2012, 3:38pm UTC](https://boards.straightdope.com/t/is-there-a-name-for-this-test-methodology-where-we-start-with-simple-tests-and-proceed-to-more-comp/645144/11 "2012-12-26T15:38:33Z")

</div>

If you read Highlights Magazine, it’s called [Brainplay](http://www.nxtbook.com/nxtbooks/highlights/highlights_nxtd/index.php?startid=39) (formally Headwork)!
