# New car tires: Can I install them myself? **URL:** \ **Category:** In My Humble Opinion\ **Created:** [September 18, 2003, 10:54pm UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489 "2003-09-18T22:54:58Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Crafter\_Man](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/crafter_man/32/458_2.png) [@Crafter\_Man](https://boards.straightdope.com/u/Crafter_Man)\ **Post date:** [September 18, 2003, 10:54pm UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/1 "2003-09-18T22:54:58Z")
Not sure if this should go on GQ or IMHO. I chose the latter. One of the things I _really_ hate is the ritual of going to a tire place and getting tires installed on my vehicle. I don’t why, but I always feel like I’m paying way too much. So I was thumbing through the Harbor Freight Tool catalog yesterday and noticed they had a tire mounting stand/tool for $35. Hmmmm. I have heard you can order tires via the Internet for much less than what they charge at the retail stores. So I was thinking: If I bought the tire mounting stand and bought the tires over the Internet, could I install the tires myself? Here are the issues as I see them: 1. Balancing. I once saw a tire balancing tool in a J.C. Whitney catalog. It was basically a stepped cone with a bubble level on top, and was pretty cheap (less than $20). Is this good enough? Or must they be dynamically balanced? 2. Assuming I have the tire mounting stand, are there any special techniques or procedures I should be aware of? 3. Disposal. Will a trash dump accept tires? Just wondering what your thoughts were… ---
**Author:** ![Chefguy](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chefguy/32/138_2.png) [@Chefguy](https://boards.straightdope.com/u/Chefguy)\ **Post date:** [September 18, 2003, 11:20pm UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/2 "2003-09-18T23:20:54Z")
You need to have them spin-balanced. Radials don’t do well with static balancing. Can’t help with the rest, but you should check in your nearest large city to see if there is a tire recycler. They turn them into asphalt. ---
**Author:** ![Booker57](https://avatars.discourse-cdn.com/v4/letter/b/b9e5f3/32.png) [@Booker57](https://boards.straightdope.com/u/Booker57)\ **Post date:** [September 18, 2003, 11:34pm UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/3 "2003-09-18T23:34:22Z")
Pay the money. I have done this (mount and dismount tires) to much in my life. A good Coates tire machine makes the job so much easyer. An air compresser is needed to seat the beads onto the rim. A high volume, high pressure unit. Start at around 4-6 CFM @ 90 psi. Yes you can, but ask this, should I? ---
**Author:** ![enipla](https://avatars.discourse-cdn.com/v4/letter/e/54ee81/32.png) [@enipla](https://boards.straightdope.com/u/enipla)\ **Post date:** [September 18, 2003, 11:34pm UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/4 "2003-09-18T23:34:42Z")
> [@](#): > > One of the things I really hate is the ritual of going to a tire place and getting tires installed on my vehicle. I don’t why, but I always feel like I’m paying way too much. Funny, I hate getting my hair cut, and a friend does it, she even gives me a beer. > [@](#): > > 1. Disposal. Will a trash dump accept tires? The dump In my county charges a dollar a tire. I think some may not accept them at all. Call them. It’s been a long time since I worked at a gas station and we did tires. We had the bubble type balancer. And the machine that would pull the tire off the rim and put it back on (air powered). If you do it, use soapy water on the bead to get it to slide over the rim. Another thing, we had a hose that you would wrap around the tire after it was on the rim. Inflate it with air and it would help seat the bead of the tire so you could inflate it. Then, we would pull out the valve stem, and hit it with LOTS of high pressure air to seat the bead. You pull out the valve stem so you can get LOTS of air in there fast (to help counter all the leakage at the bead). Once the bead is seated, you can let it deflate, replace the valve stem and inflate. In theory. ---
**Author:** ![t-keela](https://avatars.discourse-cdn.com/v4/letter/t/a3d4f5/32.png) [@t-keela](https://boards.straightdope.com/u/t-keela)\ **Post date:** [September 18, 2003, 11:54pm UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/5 "2003-09-18T23:54:49Z")
I’ve changed out a lot of tires over the years with nothing but a set of tire tools and a hammer. So can you do it? Hell yeah you **can** do it. Have you ever done it before? It’s not as easy as it sounds. Sure after you’ve practiced and done a few dozen it’ll be a piece of cake. But it’s a pain in the ass to save a few bucks every couple of years. I think it’ll take awhile to get your money back doing it yourself. You might want to re-check your prices. $20 & $35 sounds too cheap for GOOD tools. Then there’s the compresser another couple of hundred bucks. Unless you already have one. Vehicle specs often require spin balance to minimize front end wear. Don’t even wanna guess how much $$$ for that. If you decide to try…good luck. 🙂 BTW warranties are void for do it yourselfers. ---
**Author:** ![Doomtrain](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@Doomtrain](https://boards.straightdope.com/u/Doomtrain)\ **Post date:** [September 19, 2003, 12:22am UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/6 "2003-09-19T00:22:20Z")
I’d rank this as in the “Could, but why would you want to?” category. Unless you’re going through like 800 tires a year or something. ---
**Author:** ![Turbo\_Dog](https://avatars.discourse-cdn.com/v4/letter/t/ce73a5/32.png) [@Turbo\_Dog](https://boards.straightdope.com/u/Turbo_Dog)\ **Post date:** [September 19, 2003, 1:44am UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/7 "2003-09-19T01:44:15Z")
When I was a teenager I held a job in the local general store and one of my jobs was tire changing/repair. We had a very old and cheap tire machine, all manual, which means that it was basically a tire holder with a lot of tire irons, and a bubble balancer. It was a bitch to change tires, even when I finally figured the contraption and tricks out, which was probably after about 50 tires. Balancing was a true trial of patience. A good tire shop can change and balance a couple dozen tires in the time it will take you to do one. You can do it alright, but I prefer drinking coffee in the waiting room watching the game while somebody else does the work on modern equipment that does a much better job in far less time. It’s worth spending a few extra bucks to me. ---
**Author:** ![Green\_Bean](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/green_bean/32/1760_2.png) [@Green\_Bean](https://boards.straightdope.com/u/Green_Bean)\ **Post date:** [September 19, 2003, 4:10am UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/8 "2003-09-19T04:10:48Z")
> [@](#): > > \*Originally posted by t-keela \* > \*\*You might want to re-check your prices. $20 & $35 sounds too cheap for GOOD tools. \*\* You said you saw the stuff in Harbor Freight? Have you ever ordered anything from them before? They do have some good stuff at great prices, but they also sell some really crappy stuff. If you know what you’re doing, you can get good deals from them, but I wouldn’t ever take the fact that they’re willing to sell something as evidence that it’s a quality item. I’m not saying that you shouldn’t shop from them–we order from them occasionally–just _caveat emptor_) ---
**Author:** ![Crafter\_Man](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/crafter_man/32/458_2.png) [@Crafter\_Man](https://boards.straightdope.com/u/Crafter_Man)\ **Post date:** [September 19, 2003, 11:49am UTC](https://boards.straightdope.com/t/new-car-tires-can-i-install-them-myself/202489/9 "2003-09-19T11:49:42Z")
Thanks for all the responses, especially **Turbo Dog’s**. I can see now where it could take me all day to install the tires (it might be a bitch to get the tires on/off the rims, balancing will be an exercise in frustration, etc.) Guess I’ll be drinking coffee at the local tire place… 😉 Thanks.