I can’t imagine how that locks any bike or motorcycle on its own. How can you thread that around a frame of a bike/motorcycle and then a post to lock to? There is a reason most U-locks are much longer.
Which means you need some kind of chain/cable which then becomes the weak link (heh).
That ludicrous lock is missing that point that you should not leave your bicycle locked up outside and unattended. I’ll leave the bike locked up for a few minutes while I walk into the convenience store or cafe, but not all day while I am working or overnight, etc., I will bring it inside.
I’ve seen ship’s chains with links I literally cannot lift, but how are you going to carry such a thing around with you? More likely you are going to try exotic ceramic composites…
Okay I get that the main point is to create an unattractive target, but if someone really wants your bike, isn’t the bike itself a weak point too? Just cut the shaft that’s locked and weld it back together later. You’re not stealing it to ride it I presume, what do you care if it’s safe or not?
Yes . . . and no.
It required a specialist, hand-made, tool but picked in under 90 seconds,
I’ll note that requiring a specialist, hand-made, tool effectively means it isn’t pickable . . . until enough lock makers are using that style lock and then the pick will easily purchasable on AliExpress.
I’ve seen them go through pretty substantial doors with them pretty quickly. Anything held with just a doorknob and a deadbolt deforms enough to open in a reasonable amount of time.
Or just cut the thing it’s locked to, which is almost certainly less substantial than that lock.
High rise interior doors are typically 2-hour fire rated steel doors in steel jambs. The doorknobs and deadbolts and such are sometimes heavy duty mortise units but often plain old Home Depot Schlage.
The lock comes apart real quickly when subjected to that force. The latch & boltways in the jamb are a bit more substantial, but not much.
Yeah, if you really want to resist a ram, you’d mount the door to open outward, which is rare in residential exterior doors. Having to bash in the whole door frame in or fold the door up to fit through it changes that calculus a lot.
Reminds me, for no particular reason, of the type of blast door
which is an outward-opening tapered plug, the whole thing set into reinforced concrete.
Also, remember that the Mark 1, keyless, door lock looked a lot like this,
Ya can’t open it from the outside because the door is inset into the wall.
Ya can’t open it in because (bad example in the pic) the supports you drop the ‘lock’ into are, effectively, part of the wall.
Something that is happening in hurricane country is many exterior doors that used to open inwards for hinge protection are being retrofitted with doors that open outwards. Lots harder for a hurricane to push the door open inwards when that’s pushing the doot against 3 side of jamb, rather than held in place only by that ~1/2" latch plus maybe a similarly-sized deadbolt.
For people who live in the warm part of the world, inward opening doors also facilitate having an outer screen door. For people who live in the warm cold part of the world, inward opening doors also facilitate having an outer screen storm door. In either case the real security boundary is the inner door.