# Optics question: silvering the ID of a tube

**URL:** <https://boards.straightdope.com/t/optics-question-silvering-the-id-of-a-tube/644783>\
**Category:** Factual Questions\
**Created:** [December 21, 2012, 9:38pm UTC](https://boards.straightdope.com/t/optics-question-silvering-the-id-of-a-tube/644783 "2012-12-21T21:38:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Napier](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@Napier](https://boards.straightdope.com/u/Napier)\
**Post date:** [December 21, 2012, 9:38pm UTC](https://boards.straightdope.com/t/optics-question-silvering-the-id-of-a-tube/644783/1 "2012-12-21T21:38:24Z")

</div>

Can I get a first surface mirror in the form of a tube with its inner surface reflective? I want it quite shiny from 400 to 2000 nm wavelength, maybe 5 or 10 mm in diameter and 20 to 100 mm long. The optical figure is not very important, meaning it does not have to be an optically accurate cylindrical surface, but I do care about scattering. I want radiation traveling generally in one direction along the tube to remain isolated from radiation traveling generally in the opposite direction along the tube.

I have used solid silica rods and fibers, which work by total internal reflection, but can’t find any without absorption bands over this range. I also would like to handle bigger reflection angles than total internal reflection allows (that is I want this to have a higher N.A. than fibers typically do).

Thanks!

---

<div class="post-metadata">

**Author:** ![beowulff](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/beowulff/32/542_2.png) [@beowulff](https://boards.straightdope.com/u/beowulff)\
**Post date:** [December 21, 2012, 9:46pm UTC](https://boards.straightdope.com/t/optics-question-silvering-the-id-of-a-tube/644783/2 "2012-12-21T21:46:10Z")

</div>

It’s a relatively straightforward process to mirror glass. Any decent sized city will have shops that specialize in re-silvering mirrors. They will be able to mirror the inside of a glass cylinder.

ETA:  
Here’s a HS chemistry demonstration: [http://chemmovies.unl.edu/chemistry/smallscale/SS075.html](http://chemmovies.unl.edu/chemistry/smallscale/SS075.html)

---

<div class="post-metadata">

**Author:** ![Sigene](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@Sigene](https://boards.straightdope.com/u/Sigene)\
**Post date:** [December 23, 2012, 3:25am UTC](https://boards.straightdope.com/t/optics-question-silvering-the-id-of-a-tube/644783/3 "2012-12-23T03:25:07Z")

</div>

hollow waveguides sounds like what you are looking for.

> **[ARDB286.pdf](https://www.slac.stanford.edu/grp/arb/tn/arbvol3/ARDB286.pdf)**
>
> 215.67 KB

Here’s one company…[Remote Sampling – PIKE Technologies](http://www.piketech.com/Remote-Sampling/)

I’ve dealt with this sort of thing on occasion

I take it Near Infrared fiber optic cables isn’t going to work for you?

---

<div class="post-metadata">

**Author:** ![Napier](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@Napier](https://boards.straightdope.com/u/Napier)\
**Post date:** [December 23, 2012, 4:49am UTC](https://boards.straightdope.com/t/optics-question-silvering-the-id-of-a-tube/644783/4 "2012-12-23T04:49:01Z")

</div>

Wait, what was that bit about an index of refraction less than 1?
