# Peeing from a see-saw.

**URL:** <https://boards.straightdope.com/t/peeing-from-a-see-saw/525601>\
**Category:** Factual Questions\
**Created:** [January 19, 2010, 7:40pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601 "2010-01-19T19:40:53Z")\
**Posts on this page:** 15\
**Page:** 2

<div class="post-metadata">

**Author:** ![Machine\_Elf](https://avatars.discourse-cdn.com/v4/letter/m/82dd89/32.png) [@Machine\_Elf](https://boards.straightdope.com/u/Machine_Elf)\
**Post date:** [January 21, 2010, 1:05pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/21 "2010-01-21T13:05:10Z")

</div>

> [@Sapo](#):
>
> This is, in essence, my question. Is the seesaw where this could happen one that can be found in normal playgrounds (as opposed to a NASA lab)?

OK, a plain ol’ regular playground seesaw? What’s the typical length for a playground seesaw at an elementary school, maybe ten feet from fulcrum to either end? [This pic on Wikipedia](http://en.wikipedia.org/wiki/File:Seesaw-aa.jpg) look sabout right.

How much does the urine in one evacuation weight? 1 pint equals about half a liter, so 500 grams, so ~ 1 pound of urine. Unload one pound of urine from its location ten feet away from the pivot, and you’ve decreased the torque on that end of the seesaw by 1# x 10’ = ten foot-pounds.

So the fundamental question is this: on a typical playground seesaw, is the friction torque on the pivot bearing typically less than 10 foot pounds? IMHO it’s going to vary somewhat, but in most cases, I’d guess no. I think the typical seesaw pivot is just a short length of pipe riding on the exterior of a cross-bar (see pic at above link), and if you’re lucky, it’s not too rusty and maybe there’s a bit of grease in there. That’ll take more than 10 foot-pounds to get it moving.

---

<div class="post-metadata">

**Author:** ![Baracus](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Baracus](https://boards.straightdope.com/u/Baracus)\
**Post date:** [January 21, 2010, 1:35pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/22 "2010-01-21T13:35:21Z")

</div>

> [@Joe Frickin Friday](#):
>
> So the fundamental question is this: on a typical playground seesaw, is the friction torque on the pivot bearing typically less than 10 foot pounds? IMHO it’s going to vary somewhat, but in most cases, I’d guess no. I think the typical seesaw pivot is just a short length of pipe riding on the exterior of a cross-bar (see pic at above link), and if you’re lucky, it’s not too rusty and maybe there’s a bit of grease in there. That’ll take more than 10 foot-pounds to get it moving.

In that case they could just add more counterweight. There is no reason why the counterweight has to exactly match the weight of the pisser. I don’t really see why they couldn’t get this to work. You just keep adding to the counterweight until the see-saw just tips over. Remove a half pound from the counterweight and let the urine flow.

---

<div class="post-metadata">

**Author:** ![Sapo](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@Sapo](https://boards.straightdope.com/u/Sapo)\
**Post date:** [January 21, 2010, 5:29pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/23 "2010-01-21T17:29:08Z")

</div>

Thanks to those who have done some math. I have no tools to check your work but I have faith that if they were totally off someone would have jumped at them.

> [@Irishman](#):
>
> Hmm, using weights from the US Mint site, I’m getting $20 in quarters (i.e. 80) or dimes (i.e. 200), or a little less than $10 in nickels (i.e. 40). This happened several years ago, so my memory is fuzzy, but things aren’t quite adding up.

Are those two rolls of quarters in your pocket our are you really really happy to see me?.

---

<div class="post-metadata">

**Author:** ![Sapo](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@Sapo](https://boards.straightdope.com/u/Sapo)\
**Post date:** [January 21, 2010, 5:32pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/24 "2010-01-21T17:32:09Z")

</div>

> [@Joe Frickin Friday](#):
>
> So the fundamental question is this: on a typical playground seesaw, is the friction torque on the pivot bearing typically less than 10 foot pounds? IMHO it’s going to vary somewhat, but in most cases, I’d guess no. I think the typical seesaw pivot is just a short length of pipe riding on the exterior of a cross-bar (see pic at above link), and if you’re lucky, it’s not too rusty and maybe there’s a bit of grease in there. That’ll take more than 10 foot-pounds to get it moving.

Does anyone have a ball park figure of the amount of torque it would take to move a playground seesaw?

---

<div class="post-metadata">

**Author:** ![Chronos](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chronos/32/134_2.png) [@Chronos](https://boards.straightdope.com/u/Chronos)\
**Post date:** [January 21, 2010, 6:31pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/25 "2010-01-21T18:31:51Z")

</div>

> [@](#):
>
> 1 pint equals about half a liter, so 500 grams, so ~ 1 pound of urine.

Yet further proof that nobody actually understands the American system of units: You just had to convert into metric and back, using two approximations, to come up with the result that a pint of water weighs a pound, which is one of the design features of the system.

---

<div class="post-metadata">

**Author:** ![garygnu](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/garygnu/32/2924_2.png) [@garygnu](https://boards.straightdope.com/u/garygnu)\
**Post date:** [January 21, 2010, 6:35pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/26 "2010-01-21T18:35:50Z")

</div>

A pint’s a pound, but no longer the world around.

---

<div class="post-metadata">

**Author:** ![friedo](https://avatars.discourse-cdn.com/v4/letter/f/8edcca/32.png) [@friedo](https://boards.straightdope.com/u/friedo)\
**Post date:** [January 21, 2010, 6:46pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/27 "2010-01-21T18:46:46Z")

</div>

> [@Baracus](#):
>
> In that case they could just add more counterweight. There is no reason why the counterweight has to exactly match the weight of the pisser. I don’t really see why they couldn’t get this to work. You just keep adding to the counterweight until the see-saw just tips over. Remove a half pound from the counterweight and let the urine flow.

You’re missing the point. Even if the pisser decreases his weight so he is a pound lighter than the counterweight, he still has to overcome the friction of the fulcrum to allow the see-saw to move. If the maximum weight one can lose in a single piss is one pound, and the torque friction on the fulcrum is greater than ten foot-pounds, then the see-saw will not move. (Assuming a ten-foot see-saw.)

You can overcome this by using a longer see-saw and/or one with a higher-quality bearing. Neither of which are likely to be found on an average playground.

---

<div class="post-metadata">

**Author:** ![Baracus](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@Baracus](https://boards.straightdope.com/u/Baracus)\
**Post date:** [January 21, 2010, 7:16pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/28 "2010-01-21T19:16:47Z")

</div>

> [@friedo](#):
>
> You’re missing the point. Even if the pisser decreases his weight so he is a pound lighter than the counterweight, he still has to overcome the friction of the fulcrum to allow the see-saw to move. If the maximum weight one can lose in a single piss is one pound, and the torque friction on the fulcrum is greater than ten foot-pounds, then the see-saw will not move. (Assuming a ten-foot see-saw.)

Let me see if I can say this more clearly. For sake of argument, say the static friction of our ten-foot see-saw requires 50 foot-pounds to get moving. Put 4.9 pounds more weight on the opposite end than what the pisser weighs so we have a net torque of 49 foot-pounds - the see-saw doesn’t move. The pisser releases a pound of urine. Now there is a net torque of 59 foot-pounds and the see-saw moves.

---

<div class="post-metadata">

**Author:** ![friedo](https://avatars.discourse-cdn.com/v4/letter/f/8edcca/32.png) [@friedo](https://boards.straightdope.com/u/friedo)\
**Post date:** [January 21, 2010, 7:36pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/29 "2010-01-21T19:36:20Z")

</div>

OK, that makes sense.

---

<div class="post-metadata">

**Author:** ![Machine\_Elf](https://avatars.discourse-cdn.com/v4/letter/m/82dd89/32.png) [@Machine\_Elf](https://boards.straightdope.com/u/Machine_Elf)\
**Post date:** [January 21, 2010, 7:55pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/30 "2010-01-21T19:55:45Z")

</div>

> [@Chronos](#):
>
> Yet further proof that nobody actually understands the American system of units: You just had to convert into metric and back, using two approximations, to come up with the result that a pint of water weighs a pound, which is one of the design features of the system.

:smack:

Somewhere in the back of my mind I knew that 1 fluid ounce of water weighs 1 avoirdupois ounce, but I was much more acutely aware that 1 cc of water weighs one gram. So my immediate impulse was to come up with an SI quantity of water, then an SI mass, and convert back to avdp. And whaddya know, it was suspiciously close to a pound of water; I just wasn’t suspicious enough. 😃

---

<div class="post-metadata">

**Author:** ![Fastidiots](https://avatars.discourse-cdn.com/v4/letter/f/51bf81/32.png) [@Fastidiots](https://boards.straightdope.com/u/Fastidiots)\
**Post date:** [January 21, 2010, 8:02pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/31 "2010-01-21T20:02:14Z")

</div>

[Piss.](http://hypertextbook.com/facts/2001/DanielShaw.shtml)

For the sake of art, I’d say this guy could probably pack 800g of fluid, and go in search of the nicest and newest see-saw he could find.

I say entirely possible.

---

<div class="post-metadata">

**Author:** ![Sapo](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@Sapo](https://boards.straightdope.com/u/Sapo)\
**Post date:** [January 21, 2010, 10:27pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/32 "2010-01-21T22:27:52Z")

</div>

> [@Baracus](#):
>
> Let me see if I can say this more clearly. For sake of argument, say the static friction of our ten-foot see-saw requires 50 foot-pounds to get moving. Put 4.9 pounds more weight on the opposite end than what the pisser weighs so we have a net torque of 49 foot-pounds - the see-saw doesn’t move. The pisser releases a pound of urine. Now there is a net torque of 59 foot-pounds and the see-saw moves.

So the friction doesn’t really matter as long as you do your homework and account for it. Right?

---

<div class="post-metadata">

**Author:** ![TimeWinder](https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/32.png) [@TimeWinder](https://boards.straightdope.com/u/TimeWinder)\
**Post date:** [January 21, 2010, 10:57pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/33 "2010-01-21T22:57:59Z")

</div>

> [@Chronos](#):
>
> Yet further proof that nobody actually understands the American system of units: You just had to convert into metric and back, using two approximations, to come up with the result that a pint of water weighs a pound, which is one of the design features of the system.

I’d say that’s pretty much the _only_ design feature of the system, and as is typical for such a cobbled-together unit, we even got it wrong. A (US) pint of water weighs 16.69 ounces, more than two thirds of an ounce more than the design spec.

---

<div class="post-metadata">

**Author:** ![Morgenstern](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@Morgenstern](https://boards.straightdope.com/u/Morgenstern)\
**Post date:** [January 21, 2010, 11:19pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/34 "2010-01-21T23:19:34Z")

</div>

Maybe if you added a good crap the see saw would respond. My experiments show that a crap eliminates .8 to 1.5 pounds. I weighed in when I was in a weigh loss program. A good crap and a pee before weighing was worth 1.5 to 2 pounds on a very sensitive scale.

---

<div class="post-metadata">

**Author:** ![USCDiver](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/uscdiver/32/354_2.png) [@USCDiver](https://boards.straightdope.com/u/USCDiver)\
**Post date:** [January 21, 2010, 11:31pm UTC](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601/35 "2010-01-21T23:31:50Z")

</div>

One thing to consider with this particular picture (hopefully I didn’t skim over someone else making the same point) is that the fellow in question is not done peeing yet. He clearly has a good stream still going in the After photo. So if this were a carefully balanced situation it will have to be closer than just full vs empty bladder.

[Previous page](https://boards.straightdope.com/t/peeing-from-a-see-saw/525601.md?page=1)
