# Please help identify this 3D shape

**URL:** <https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293>\
**Category:** Factual Questions\
**Created:** [January 3, 2012, 9:18pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293 "2012-01-03T21:18:49Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fish\_Cheer](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/fish_cheer/32/17179_2.png) [@Fish\_Cheer](https://boards.straightdope.com/u/Fish_Cheer)\
**Post date:** [January 3, 2012, 9:18pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/1 "2012-01-03T21:18:49Z")

</div>

Photo here.

I seem to remember that there was something special about the way it rolled down an incline, and that its name started with an “o”. Sorry, that’s all I got.

---

<div class="post-metadata">

**Author:** ![beowulff](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/beowulff/32/542_2.png) [@beowulff](https://boards.straightdope.com/u/beowulff)\
**Post date:** [January 3, 2012, 10:46pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/2 "2012-01-03T22:46:42Z")

</div>

It’s very hard to see from your photo, but it looks vaguely like a [Reuleaux Triangle](http://en.wikipedia.org/wiki/Reuleaux_triangle) - Like the rotor of a Wankel engine.

---

<div class="post-metadata">

**Author:** ![Fish\_Cheer](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/fish_cheer/32/17179_2.png) [@Fish\_Cheer](https://boards.straightdope.com/u/Fish_Cheer)\
**Post date:** [January 3, 2012, 11:32pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/3 "2012-01-03T23:32:27Z")

</div>

Thank you, **beowulff** , but that’s not it. I’m sorry the picture is so bad.

I tried to draw it in Google SketchUp, but failed miserably. Anyone know a good online library of 3D shapes that I could browse through?

---

<div class="post-metadata">

**Author:** ![Mangetout](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/mangetout/32/19_2.png) [@Mangetout](https://boards.straightdope.com/u/Mangetout)\
**Post date:** [January 3, 2012, 11:51pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/4 "2012-01-03T23:51:47Z")

</div>

Is it one of these?

> **[The story of the Gömböc](https://plus.maths.org/content/story-gomboc)**
>
> A Gömböc is a strange thing. It looks like an egg with sharp edges, and when you put it down it starts wriggling and rolling around as if it were alive. Until quite recently, no-one knew whether Gömböcs even existed. Even now, Gábor Domokos, one of...

---

<div class="post-metadata">

**Author:** ![Yeticus\_Rex](https://avatars.discourse-cdn.com/v4/letter/y/a698b9/32.png) [@Yeticus\_Rex](https://boards.straightdope.com/u/Yeticus_Rex)\
**Post date:** [January 4, 2012, 12:34am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/5 "2012-01-04T00:34:41Z")

</div>

It looks like a cross between a teardrop and a clam shell…would that be an accurate description of what you saw?

---

<div class="post-metadata">

**Author:** ![Dr.Strangelove](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/dr.strangelove/32/6613_2.png) [@Dr.Strangelove](https://boards.straightdope.com/u/Dr.Strangelove)\
**Post date:** [January 4, 2012, 1:01am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/6 "2012-01-04T01:01:36Z")

</div>

> [@Mangetout](#):
>
> Is it one of these?

That’s very interesting; I hadn’t heard of that before. I don’t think that’s it, but when reading up about the gömböc I found a reference to the [oloid](http://en.wikipedia.org/wiki/Oloid), which looks very close to the OP’s photo, and starts with an “o”.

---

<div class="post-metadata">

**Author:** ![cmyk](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/cmyk/32/3353_2.png) [@cmyk](https://boards.straightdope.com/u/cmyk)\
**Post date:** [January 4, 2012, 4:55am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/7 "2012-01-04T04:55:44Z")

</div>

> [@Fish\_Cheer](#):
>
> Thank you, **beowulff** , but that’s not it. I’m sorry the picture is so bad.
> 
> I tried to draw it in Google SketchUp, but failed miserably. Anyone know a good online library of 3D shapes that I could browse through?

> [@Dr.Strangelove](#):
>
> That’s very interesting; I hadn’t heard of that before. I don’t think that’s it, but when reading up about the gömböc I found a reference to the [oloid](http://en.wikipedia.org/wiki/Oloid), which looks very close to the OP’s photo, and starts with an “o”.

Looked like a fun challenge. Once Dr. Strangelove nailed the shape (interesting, that), I gave it a shot… only took me about two mins. [Check it out!](http://vimeo.com/34543086)

---

<div class="post-metadata">

**Author:** ![cmyk](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/cmyk/32/3353_2.png) [@cmyk](https://boards.straightdope.com/u/cmyk)\
**Post date:** [January 4, 2012, 5:17am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/8 "2012-01-04T05:17:07Z")

</div>

Whoops, looks like I needed to pinch the other end as well. It’s cool though. I want to replace the tires on my Jetta with those.

---

<div class="post-metadata">

**Author:** ![Fish\_Cheer](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/fish_cheer/32/17179_2.png) [@Fish\_Cheer](https://boards.straightdope.com/u/Fish_Cheer)\
**Post date:** [January 4, 2012, 6:13am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/9 "2012-01-04T06:13:24Z")

</div>

> [@Mangetout](#):
>
> Is it one of these?

Not quite, but that’s interesting nevertheless, thank you!

> [@Yeticus\_Rex](#):
>
> It looks like a cross between a teardrop and a clam shell…would that be an accurate description of what you saw?

Yes, those were my first associations, too.

> [@Dr.Strangelove](#):
>
> I found a reference to the [oloid](http://en.wikipedia.org/wiki/Oloid), which looks very close to the OP’s photo, and starts with an “o”.

That’s it! Great!

> [@Wikipedia](#):
>
> While rolling, the distance between center of gravity and floor has two minimums and maximums, so it rolls very swinging but smooth: it never falls over its edges. It is the only known object other than some members of the sphericon family that develops its entire surface while rolling.

> **[Oloid](https://en.wikipedia.org/wiki/Oloid)**
>
> An oloid is a three-dimensional curved geometric object that was discovered by Paul Schatz in 1929. It is the convex hull of a skeletal frame made by placing two linked congruent circles in perpendicular planes, so that the center of each circle lies on the edge of the other circle. The distance between the circle centers equals the radius of the circles. One third of each circle's perimeter lies inside the convex hull, so the same shape may be also formed as the convex hull of the two remaining ...

See it [rolling](http://www.youtube.com/watch?v=GM3_JuFgJ2E) here.

> [@cmyk](#):
>
> Looked like a fun challenge. Once Dr. Strangelove nailed the shape (interesting, that), I gave it a shot… only took me about two mins. [Check it out!](http://vimeo.com/34543086)

Wow, great video and soundtrack! I had actually tried a similar approach (draw a circle, pull it into a cylinder and then rotate one end), but I couldn’t figure out SketchUp’s user interface.

---

<div class="post-metadata">

**Author:** ![Fish\_Cheer](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/fish_cheer/32/17179_2.png) [@Fish\_Cheer](https://boards.straightdope.com/u/Fish_Cheer)\
**Post date:** [January 4, 2012, 6:22am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/10 "2012-01-04T06:22:12Z")

</div>

> [@Yeticus\_Rex](#):
>
> It looks like a cross between a teardrop and a clam shell…would that be an accurate description of what you saw?

I should add, though, that as you can see in the Wikipedia article, the far end is not only round, but also tapered, if that makes any sense. So rather than a teardrop and a clam shell, it’s more like two clam shells set back-to-back at a 90 degree angle.

---

<div class="post-metadata">

**Author:** ![Enola\_Straight](https://avatars.discourse-cdn.com/v4/letter/e/dec6dc/32.png) [@Enola\_Straight](https://boards.straightdope.com/u/Enola_Straight)\
**Post date:** [January 4, 2012, 4:33pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/11 "2012-01-04T16:33:24Z")

</div>

Its a chinese fortune cookie!😉

---

<div class="post-metadata">

**Author:** ![Lance\_Turbo](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/lance_turbo/32/6156_2.png) [@Lance\_Turbo](https://boards.straightdope.com/u/Lance_Turbo)\
**Post date:** [January 5, 2012, 5:06am UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/12 "2012-01-05T05:06:54Z")

</div>

I just realized that this thread is related to [this other thread](http://boards.straightdope.com/sdmb/showthread.php?t=637156) in that the surface of an oloid can be cut into four pieces that are each a chunk of a circular oblique cone.

I don’t know if that info helps anyone draw an oloid, but it helped me create one with Mathematica.

It’s weird that these two threads were on the front page of GQ at the same time.

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [January 5, 2012, 5:11pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/13 "2012-01-05T17:11:38Z")

</div>

> [@Lance\_Turbo](#):
>
> I just realized that this thread is related to [this other thread](http://boards.straightdope.com/sdmb/showthread.php?t=637156) in that the surface of an oloid can be cut into four pieces that are each a chunk of a circular oblique cone.
> 
> I don’t know if that info helps anyone draw an oloid, but it helped me create one with Mathematica.

That’s good for visualizing, but the surface isn’t really four cones. See [The development of the Oloid (PDF)](http://www.heldermann-verlag.de/jgg/jgg01_05/jgg0113.pdf).

In Figure 2, the line AB represents the straight line the oloid will have touching a plane as it rolls on it. A and B are both parametrized by _t_, and are both varying simultaneously. You can also see that the line from (0,1/2,1) (which would be the apex of your approximating cone) to U will intersect the disk Pi[sub]2[/sub].

I think if you instead took the convex hull of the semicircle of Pi[sub]1[/sub] with y \< -1/2 and the semicircle of Pi[sub]2[/sub] with y \> 1/2, you \*would \*get a shape made of four cones.

---

<div class="post-metadata">

**Author:** ![Lance\_Turbo](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/lance_turbo/32/6156_2.png) [@Lance\_Turbo](https://boards.straightdope.com/u/Lance_Turbo)\
**Post date:** [January 5, 2012, 10:07pm UTC](https://boards.straightdope.com/t/please-help-identify-this-3d-shape/608293/14 "2012-01-05T22:07:44Z")

</div>

**ZenBeam** , you are correct. I drew the convex hull of two semicircles. My mistake.
