# Problem with Massey Ferguson 1240

**URL:** <https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208>\
**Category:** Factual Questions\
**Created:** [August 22, 2014, 3:50pm UTC](https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208 "2014-08-22T15:50:48Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![bmasters1](https://avatars.discourse-cdn.com/v4/letter/b/b5e925/32.png) [@bmasters1](https://boards.straightdope.com/u/bmasters1)\
**Post date:** [August 22, 2014, 3:50pm UTC](https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208/1 "2014-08-22T15:50:48Z")

</div>

I have a 1990 1240 Massey Ferguson. I was using it this morning, and it just shut off. My fuel filter is new and the air filter is clean. I took the fuel line loose going to the injector pump. I turned my key on, and I’m getting plenty of fuel. I checked all fuses; all good. I attempted to start, and it spins normally, but will not fire. Can anyone give me any idea of what the problem is?

---

<div class="post-metadata">

**Author:** ![casdave](https://avatars.discourse-cdn.com/v4/letter/c/c6cbf5/32.png) [@casdave](https://boards.straightdope.com/u/casdave)\
**Post date:** [August 22, 2014, 4:16pm UTC](https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208/2 "2014-08-22T16:16:11Z")

</div>

The fact that it just shut off dead is a concern, usually if it is running and cuts out, the engine is hot enough not to need the glow plugs working.

There is a fuel solenoid on it somewhere, maybe a wire fell off it, and also the gearbox safety switch - this is the one that prevents you starting it when you are in gear, unless you have the clutch depressed. The sudden stop does seem like a fuel solenoid issue to me - see if you can get an electrical drawing online and find out what switches are in line with the fuel shut off solenoid

---

<div class="post-metadata">

**Author:** ![Really\_Not\_All\_That\_Bright](https://avatars.discourse-cdn.com/v4/letter/r/e8c25b/32.png) [@Really\_Not\_All\_That\_Bright](https://boards.straightdope.com/u/Really_Not_All_That_Bright)\
**Post date:** [August 22, 2014, 4:26pm UTC](https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208/3 "2014-08-22T16:26:15Z")

</div>

This _has_ to be a first.

---

<div class="post-metadata">

**Author:** ![Kansas\_Beekeeper](https://avatars.discourse-cdn.com/v4/letter/k/c37758/32.png) [@Kansas\_Beekeeper](https://boards.straightdope.com/u/Kansas_Beekeeper)\
**Post date:** [August 22, 2014, 4:57pm UTC](https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208/4 "2014-08-22T16:57:24Z")

</div>

If it’s not the fuel shut off solenoid, I think you’ve got injection pump troubles.

---

<div class="post-metadata">

**Author:** ![SeldomSeen](https://avatars.discourse-cdn.com/v4/letter/s/7ba0ec/32.png) [@SeldomSeen](https://boards.straightdope.com/u/SeldomSeen)\
**Post date:** [August 22, 2014, 6:20pm UTC](https://boards.straightdope.com/t/problem-with-massey-ferguson-1240/696208/5 "2014-08-22T18:20:23Z")

</div>

Eliminate the simple stuff first. I had a 1440 that would act similarly. It turned out to be water in the fuel. There was a water trap/sediment bowl just off the tank. When it got too much water built up it would start passing on through the line and the engine would die. Happened 5 or 6 times before I got all the water out. There’s also the possibility that it’s sucking air somewhere between tank and injectors.
