# Quick Plant ID (and advice on destruction)

**URL:** <https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255>\
**Category:** Factual Questions\
**Created:** [February 13, 2014, 4:04pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255 "2014-02-13T16:04:49Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![yearofglad](https://avatars.discourse-cdn.com/v4/letter/y/b782af/32.png) [@yearofglad](https://boards.straightdope.com/u/yearofglad)\
**Post date:** [February 13, 2014, 4:04pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/1 "2014-02-13T16:04:49Z")

</div>

I live in Portland, OR. Can someone identify this plant for me?

[Photo of plant](http://www.yearofglad.com/images/plant1.jpg)

I’d like to kill it and replant something else there; I don’t mind using chemicals (as long as they don’t remain in the soil and affect a future planting).

Unfortunately, the roots are most likely under the deck so not easily accessible.

Any particular chemical/active ingredient I should look for to vanquish it?

Thanks.

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [February 13, 2014, 4:09pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/2 "2014-02-13T16:09:06Z")

</div>

Is it a bush, or is it ground cover?

---

<div class="post-metadata">

**Author:** ![yearofglad](https://avatars.discourse-cdn.com/v4/letter/y/b782af/32.png) [@yearofglad](https://boards.straightdope.com/u/yearofglad)\
**Post date:** [February 13, 2014, 4:10pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/3 "2014-02-13T16:10:24Z")

</div>

It’s a bush/shrub, probably about… 2 feet high, I suppose. If another pic would be helpful, let me know - it’s fairly common here around Portland, so figured a pic of the leaves would be enough.

---

<div class="post-metadata">

**Author:** ![Ulfreida](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/ulfreida/32/8014_2.png) [@Ulfreida](https://boards.straightdope.com/u/Ulfreida)\
**Post date:** [February 13, 2014, 10:03pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/4 "2014-02-13T22:03:06Z")

</div>

It is Viburnum davidii, a common landscaping shrub in the PNW. It’s from China. It is not invasive or difficult to remove, just dig it up if you don’t like it. Chemicals are not necessary.

---

<div class="post-metadata">

**Author:** ![purplehorseshoe](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/purplehorseshoe/32/2996_2.png) [@purplehorseshoe](https://boards.straightdope.com/u/purplehorseshoe)\
**Post date:** [February 13, 2014, 10:03pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/5 "2014-02-13T22:03:46Z")

</div>

n/m

---

<div class="post-metadata">

**Author:** ![yearofglad](https://avatars.discourse-cdn.com/v4/letter/y/b782af/32.png) [@yearofglad](https://boards.straightdope.com/u/yearofglad)\
**Post date:** [February 13, 2014, 11:55pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/6 "2014-02-13T23:55:39Z")

</div>

> [@Ulfreida](#):
>
> It is Viburnum davidii, a common landscaping shrub in the PNW. It’s from China. It is not invasive or difficult to remove, just dig it up if you don’t like it. Chemicals are not necessary.

Thanks for the name of the plant! Unfortunately, the roots, as I said, are under a deck that isn’t easily removable. Digging it up is not an option.

---

<div class="post-metadata">

**Author:** ![CC](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@CC](https://boards.straightdope.com/u/CC)\
**Post date:** [February 14, 2014, 12:04am UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/7 "2014-02-14T00:04:14Z")

</div>

Hey, how’d you do that deal where when I clicked on a highlighted word (link) I got a picture? There have been many times when I wanted to do something like that here, but couldn’t figure out how to do it without giving everyone a link to all my Picasa albums. What’s the trick? xo,  
C.

---

<div class="post-metadata">

**Author:** ![yearofglad](https://avatars.discourse-cdn.com/v4/letter/y/b782af/32.png) [@yearofglad](https://boards.straightdope.com/u/yearofglad)\
**Post date:** [February 14, 2014, 1:07am UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/8 "2014-02-14T01:07:18Z")

</div>

> [@CC](#):
>
> Hey, how’d you do that deal where when I clicked on a highlighted word (link) I got a picture? There have been many times when I wanted to do something like that here, but couldn’t figure out how to do it without giving everyone a link to all my Picasa albums. What’s the trick? xo,  
> C.

If you go to my post and click “Quote” (in the lower left of my post), it’ll display the code used. (It starts with a square bracket and then URL=…)

Or, the short way here at Straight Dope is, when composing a message or reply, click the icon that looks like the planet earth with a little chain link, just above the window in which you’re typing your post. It’ll ask you for the URL you want to link to. Type in (or copy and paste) the address of the photo and click OK and it’ll put the code in for you.

I hope that helps!

---

<div class="post-metadata">

**Author:** ![madrabbitwoman](https://avatars.discourse-cdn.com/v4/letter/m/c37758/32.png) [@madrabbitwoman](https://boards.straightdope.com/u/madrabbitwoman)\
**Post date:** [February 14, 2014, 2:18am UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/9 "2014-02-14T02:18:11Z")

</div>

Roundup aka glyphsate will just about any plant. Cut it back and paint on stump branches

---

<div class="post-metadata">

**Author:** ![yearofglad](https://avatars.discourse-cdn.com/v4/letter/y/b782af/32.png) [@yearofglad](https://boards.straightdope.com/u/yearofglad)\
**Post date:** [February 14, 2014, 2:19am UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/10 "2014-02-14T02:19:00Z")

</div>

> [@madrabbitwoman](#):
>
> Roundup aka glyphsate will just about any plant. Cut it back and paint on stump branches

I tried spraying it on the leaves a month ago or so with little result - some leaves withered, but the plant kept on trucking. Cut back where I could today and will try to apply it to the branches. Just didn’t seem to work the first time.

---

<div class="post-metadata">

**Author:** ![Weedy](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/weedy/32/301_2.png) [@Weedy](https://boards.straightdope.com/u/Weedy)\
**Post date:** [February 14, 2014, 5:38am UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/11 "2014-02-14T05:38:07Z")

</div>

Roundup works best when the plant is actively growing. Winter may not be the best time.

---

<div class="post-metadata">

**Author:** ![madrabbitwoman](https://avatars.discourse-cdn.com/v4/letter/m/c37758/32.png) [@madrabbitwoman](https://boards.straightdope.com/u/madrabbitwoman)\
**Post date:** [February 14, 2014, 7:22am UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/12 "2014-02-14T07:22:29Z")

</div>

True about the weather thing. You could try boiling water - tends to be pretty instant. You would need quite a bit though

---

<div class="post-metadata">

**Author:** ![purplehorseshoe](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/purplehorseshoe/32/2996_2.png) [@purplehorseshoe](https://boards.straightdope.com/u/purplehorseshoe)\
**Post date:** [February 14, 2014, 5:09pm UTC](https://boards.straightdope.com/t/quick-plant-id-and-advice-on-destruction/681255/13 "2014-02-14T17:09:01Z")

</div>

> [@yearofglad](#):
>
> I tried spraying it on the leaves a month ago or so with little result - some leaves withered, but the plant kept on trucking. Cut back where I could today and will try to apply it to the branches. Just didn’t seem to work the first time.

painting on cut branches =/= spraying on leaves

The cuts on the branches allow the stuff to get into the plant’s system. Many leaves have coatings that prevent the spray from penetrating.
