# Recent server timeout errors — anyone else getting them?

**URL:** <https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514>\
**Category:** About This Message Board\
**Created:** [December 7, 2019, 4:13pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514 "2019-12-07T16:13:54Z")\
**Posts on this page:** 20\
**Page:** 13

<div class="post-metadata">

**Author:** ![Senegoid](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/senegoid/32/6606_2.png) [@Senegoid](https://boards.straightdope.com/u/Senegoid)\
**Post date:** [January 7, 2020, 4:26am UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/241 "2020-01-07T04:26:18Z")

</div>

I found the solution:

When I open any thread successfully, I always immediately open several others in separate tabs that look interesting while I can. Then when I try to open a thread and it gets stuck, I have other threads open in other tabs I can switch to for a while instead of sitting there twiddling my thumbs. Likewise, if it gets stuck when I try to post something, I just go read another thread for a while, knowing that the stuck attempted post actually did get posted, probably. Alternatively, I can have stuff open in other tabs from other sites (like news articles) I can switch to reading.

And, as an experiment (we’re still allowed to used ATMB for test posts, right?), if it gets stuck when I post _this_, I’ll try again and again and see how many duplicate posts I can get out of this! 🙂 Here goes . . .

ETA: Well, dang! It worked the first time.

---

<div class="post-metadata">

**Author:** ![Bullitt](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bullitt/32/5725_2.png) [@Bullitt](https://boards.straightdope.com/u/Bullitt)\
**Post date:** [January 7, 2020, 5:07am UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/242 "2020-01-07T05:07:40Z")

</div>

Well **Senegoid** , when it works for you that’s good. But to be a little nit-picky that’s not a _solution_, it’s a _workaround_. I have a workaround too — from my subscriptions page, instead of selecting the last post in the trivia dominoes thread game, which is where I usually see the errors, I first select the thread OP, then select the last page, then scroll to the bottom. That workaround usually works for me.

---

<div class="post-metadata">

**Author:** ![Bullitt](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bullitt/32/5725_2.png) [@Bullitt](https://boards.straightdope.com/u/Bullitt)\
**Post date:** [January 7, 2020, 7:52pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/243 "2020-01-07T19:52:21Z")

</div>

502 Server Error

Error: Server Error  
The server encountered a temporary error and could not complete your request.  
Please try again in 30 seconds.

---

<div class="post-metadata">

**Author:** ![margin](https://avatars.discourse-cdn.com/v4/letter/m/65b543/32.png) [@margin](https://boards.straightdope.com/u/margin)\
**Post date:** [January 7, 2020, 10:53pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/244 "2020-01-07T22:53:41Z")

</div>

Yeah, just got a server error that ate my bloody comment. It doesn’t seem to be logging me out, though.

---

<div class="post-metadata">

**Author:** ![Bullitt](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bullitt/32/5725_2.png) [@Bullitt](https://boards.straightdope.com/u/Bullitt)\
**Post date:** [January 8, 2020, 3:28am UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/245 "2020-01-08T03:28:45Z")

</div>

> [@margin](#):
>
> Yeah, just got a server error that ate my bloody comment. It doesn’t seem to be logging me out, though.

None of the errors I got ever logged me out.

---

<div class="post-metadata">

**Author:** ![Kent\_Clark](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/kent_clark/32/105_2.png) [@Kent\_Clark](https://boards.straightdope.com/u/Kent_Clark)\
**Post date:** [January 8, 2020, 5:17pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/246 "2020-01-08T17:17:23Z")

</div>

**Error: Server Error  
The server encountered a temporary error and could not complete your request.  
Please try again in 30 seconds.**

That started about five minutes ago, and since then I’ve gotten the message three times. I’m not even trying to post, just read threads.

---

<div class="post-metadata">

**Author:** ![Bullitt](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bullitt/32/5725_2.png) [@Bullitt](https://boards.straightdope.com/u/Bullitt)\
**Post date:** [January 8, 2020, 7:04pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/247 "2020-01-08T19:04:57Z")

</div>

Just now, at 1104U hrs:

**504 Gateway Time-out  
shield**

---

<div class="post-metadata">

**Author:** ![Bullitt](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bullitt/32/5725_2.png) [@Bullitt](https://boards.straightdope.com/u/Bullitt)\
**Post date:** [January 8, 2020, 7:07pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/248 "2020-01-08T19:07:01Z")

</div>

That was followed up with this, at 1106U hrs:

**The following errors occurred with your submission:  
This forum requires that you wait 60 seconds between posts. Please try again in 60 seconds.**  
This bug apparently includes the system thinking I pressed Post Quick Reply 2x when I did not.

---

<div class="post-metadata">

**Author:** ![WolfpackJeep](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/wolfpackjeep/32/2921_2.png) [@WolfpackJeep](https://boards.straightdope.com/u/WolfpackJeep)\
**Post date:** [January 8, 2020, 7:19pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/249 "2020-01-08T19:19:00Z")

</div>

Just got the “504 Gateway Time-out shield” message when trying to read a thread by clicking on a link in an email. I clicked the email link a second time, and it worked.

(Android 10 on 1st Gen Pixel, Chrome, Wi-Fi connection)

---

<div class="post-metadata">

**Author:** ![Bijou\_Drains](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bijou_drains/32/2814_2.png) [@Bijou\_Drains](https://boards.straightdope.com/u/Bijou_Drains)\
**Post date:** [January 8, 2020, 8:21pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/250 "2020-01-08T20:21:50Z")

</div>

Is there any evidence anything is being done to fix the problem? I know the site is free to me. But it is getting more and more frustrating.

---

<div class="post-metadata">

**Author:** ![Bijou\_Drains](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bijou_drains/32/2814_2.png) [@Bijou\_Drains](https://boards.straightdope.com/u/Bijou_Drains)\
**Post date:** [January 8, 2020, 9:57pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/251 "2020-01-08T21:57:58Z")

</div>

> [@Bijou\_Drains](#):
>
> Is there any evidence anything is being done to fix the problem? I know the site is free to me. But it is getting more and more frustrating.

To clarify it would be nice to know they tried , X,Y,Z etc.

---

<div class="post-metadata">

**Author:** ![TheCuse](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/thecuse/32/2854_2.png) [@TheCuse](https://boards.straightdope.com/u/TheCuse)\
**Post date:** [January 8, 2020, 11:50pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/252 "2020-01-08T23:50:50Z")

</div>

twice in the last five minutes.

---

<div class="post-metadata">

**Author:** ![Bullitt](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bullitt/32/5725_2.png) [@Bullitt](https://boards.straightdope.com/u/Bullitt)\
**Post date:** [January 9, 2020, 2:23am UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/253 "2020-01-09T02:23:39Z")

</div>

504 Gateway Time-out  
shield

Just now. Laptop, Win 10 pro, Chrome, wifi.

---

<div class="post-metadata">

**Author:** ![Bijou\_Drains](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bijou_drains/32/2814_2.png) [@Bijou\_Drains](https://boards.straightdope.com/u/Bijou_Drains)\
**Post date:** [January 9, 2020, 6:03pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/254 "2020-01-09T18:03:40Z")

</div>

since nobody will post what is being done to fix the issues I assume the answer is nothing is being done.

I guess that’s OK since I don’t pay to be here, but I would pay if given the chance.

---

<div class="post-metadata">

**Author:** ![Chefguy](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chefguy/32/138_2.png) [@Chefguy](https://boards.straightdope.com/u/Chefguy)\
**Post date:** [January 9, 2020, 6:05pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/255 "2020-01-09T18:05:22Z")

</div>

I have not bitched about these things in the past, as I just figure the hamsters are having a bad day, but the board has been dragging for weeks now, with no relief in sight. Clicking on a topic may or may not take you to your destination, and sometimes I get the same ‘timed out’ message that others are getting. I don’t need instant gratification, but eventually getting _somewhere_ would be nice.

---

<div class="post-metadata">

**Author:** ![ftg](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/ftg/32/2801_2.png) [@ftg](https://boards.straightdope.com/u/ftg)\
**Post date:** [January 9, 2020, 7:24pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/256 "2020-01-09T19:24:00Z")

</div>

Everything was going swimmingly this afternoon until I opened this thread. Just a long delay, no 50x error.

Not the first time this has happened with this thread. Hmmm.

---

<div class="post-metadata">

**Author:** ![Dallas\_Jones](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/dallas_jones/32/3277_2.png) [@Dallas\_Jones](https://boards.straightdope.com/u/Dallas_Jones)\
**Post date:** [January 9, 2020, 7:31pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/257 "2020-01-09T19:31:40Z")

</div>

Does anyone here understand the logs from a de-bugger tool like Fiddler? I have it installed and I just had another error message when taking too long to compose a post. This is the latest part of the log.

I am just a computer operator type. But it looks to me like a SDMB server issue. If anyone is more familiar with these tools, please explain what the log means.

[Logging - Fiddler](http://fiddler2.com/r/?FiddlerLog) for details.

10:15:31:4105 Fiddler Running…  
10:15:31:7073 Windows 8+ AppContainer isolation feature detected.  
10:16:35:1318 HTTPSLint\> Warning: ClientHello record was 418 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:16:35:1318 HTTPSLint\> Warning: ClientHello record was 418 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:17:48:6661 [Fiddler] No HTTP request was received from (microsoftedgecp:8448) new client socket, port 50810.  
10:20:24:5266 [Fiddler] No HTTP request was received from (microsoftedgecp:6836) new client socket, port 50871.  
10:21:46:5110 [Fiddler] No HTTP request was received from (microsoftedgecp:6296) new client socket, port 50942.  
10:22:36:4148 HTTPSLint\> Warning: ClientHello record was 421 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:22:36:7741 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:22:36:8053 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:25:11:2068 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:29:20:9077 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:30:01:6542 HTTPSLint\> Warning: ClientHello record was 421 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:50:26:1107 HTTPSLint\> Warning: ClientHello record was 421 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:59:05:8985 HTTPSLint\> Warning: ClientHello record was 421 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
10:59:06:6955 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
11:02:44:0441 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
11:02:44:1843 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
11:04:28:8781 HTTPSLint\> Warning: ClientHello record was 413 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
11:09:07:3861 HTTPSLint\> Warning: ClientHello record was 384 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)  
11:12:43:9739 HTTPSLint\> Warning: ClientHello record was 421 bytes long. Some servers have problems with ClientHello’s greater than 255 bytes. [Long Handshake Intolerance · ssllabs/research Wiki · GitHub](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)

---

<div class="post-metadata">

**Author:** ![Dallas\_Jones](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/dallas_jones/32/3277_2.png) [@Dallas\_Jones](https://boards.straightdope.com/u/Dallas_Jones)\
**Post date:** [January 9, 2020, 7:39pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/258 "2020-01-09T19:39:31Z")

</div>

Looks like it could be Long Handshake Intolerance. Whatever the hell that is. Or maybe not. _SOMEBODY_ on this board should be able to use one of these tools to point in the general direction of the problem.

> **[Long Handshake Intolerance](https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance)**
>
> Contribute to ssllabs/research development by creating an account on GitHub.

---

<div class="post-metadata">

**Author:** ![Bijou\_Drains](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/bijou_drains/32/2814_2.png) [@Bijou\_Drains](https://boards.straightdope.com/u/Bijou_Drains)\
**Post date:** [January 9, 2020, 7:45pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/259 "2020-01-09T19:45:33Z")

</div>

they should be able to find the problem if they want to. It’s not a money issue, there are many free tools to monitor website performance.

---

<div class="post-metadata">

**Author:** ![atimnie](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/atimnie/32/11_2.png) [@atimnie](https://boards.straightdope.com/u/atimnie)\
**Post date:** [January 9, 2020, 8:26pm UTC](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514/260 "2020-01-09T20:26:37Z")

</div>

Are there any apps or tools that can speed things up on the user’s end?

[Previous page](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514.md?page=12)

[Next page](https://boards.straightdope.com/t/recent-server-timeout-errors-anyone-else-getting-them/844514.md?page=14)
