# SANDRA  Benchmarking software

**URL:** <https://boards.straightdope.com/t/sandra-benchmarking-software/682959>\
**Category:** Factual Questions\
**Created:** [March 5, 2014, 7:26pm UTC](https://boards.straightdope.com/t/sandra-benchmarking-software/682959 "2014-03-05T19:26:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![kaylasdad99](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/kaylasdad99/32/3398_2.png) [@kaylasdad99](https://boards.straightdope.com/u/kaylasdad99)\
**Post date:** [March 5, 2014, 7:26pm UTC](https://boards.straightdope.com/t/sandra-benchmarking-software/682959/1 "2014-03-05T19:26:37Z")

</div>

I’ve just installed the [SANDRA diagnostic and benchmarking software](http://en.wikipedia.org/wiki/SiSoftware) on a computer, to familiarize myself with its capabilities.

The RAM architecture is single channel DDR-2, with two DIMM slots.

Per instructions from my instructor (I’m doing this in a training program for work), I benchmarked the RAM Bandwidth using first, a single 512MB RAM card, and then two cards. In both instances, I got an effective bandwidth of approx. 3110 MB/s.

I then swapped out my memory cards for a pair of 256MB sticks, and ran the diagnostic again. The single-stick bandwidth was 3232 MB/s, and the two-stick bandwidth was 2950 MB/s.

This did not seem right to me, _or to my instructor_. Why should doubling up on the amount of RAM cause a drop in bandwidth? Postulating that one of the memory sticks might be compromised, I re-ran the diagnostic, using the stick that had not originally been tested in a single-stick configuration.

The results were the same. RAM bandwidth of 3232 MB/s.

Anybody have any ideas why this should be so?

Thanks in advance for any insights.
