# Sharp TV service menu question
**URL:** https://boards.straightdope.com/t/sharp-tv-service-menu-question/244536
**Category:** Factual Questions
**Created:** [May 10, 2004, 11:36pm UTC](https://boards.straightdope.com/t/sharp-tv-service-menu-question/244536 "2004-05-10T23:36:39Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@habs](https://boards.straightdope.com/u/habs)
#### Post date: [May 10, 2004, 11:36pm UTC](https://boards.straightdope.com/t/sharp-tv-service-menu-question/244536/1 "2004-05-10T23:36:39Z")
I recently purchased a Sharp 32UF6, and entered the Service Mode for calibration and to disable SVM (scanning velocity modulation). However, the various settings are not labeled intuitively (e.g., V001, V002, V003, etc.). Could someone either point me to an online listing/key of all the service menu codes for this particular TV, or let me know which specific setting disables SVM?
Thanks in advance! 🙂
---
### Author:  [@Joey\_P](https://boards.straightdope.com/u/Joey_P)
#### Post date: [May 10, 2004, 11:51pm UTC](https://boards.straightdope.com/t/sharp-tv-service-menu-question/244536/2 "2004-05-10T23:51:20Z")
Take a look around over at [avsforum.com](http://avsforum.com), they might be able to help you. (If you’ve never been there, go to [avsforum.com](http://avsforum.com), after the page fully loads, bring the mouse over FORUMS up at the top and then AVS Forum on the drop down menu. Someone in one of the forums under the heading Display Devices can probably help you.