# Testing Post Count

**URL:** <https://boards.straightdope.com/t/testing-post-count/917249>\
**Category:** About This Message Board\
**Created:** [August 4, 2020, 1:03pm UTC](https://boards.straightdope.com/t/testing-post-count/917249 "2020-08-04T13:03:29Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:03pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/1 "2020-08-04T13:03:29Z")

</div>

With only 678 posts I am never going to come close to being a prolific poster. However my ambition is to at least reach 1000.

I am suspicious that some of my posts made under Discourse are not being added to my total. So I am watching my counter.

TCMF-2L

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:05pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/2 "2020-08-04T13:05:57Z")

</div>

Having made the above post it hasn’t registered as a post or as a new thread started in my statistics.

I assume it’s not even possible to choose not to have posts counted so is this a bug?

TCMF-2L

---

<div class="post-metadata">

**Author:** ![Folly](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/folly/32/3219_2.png) [@Folly](https://boards.straightdope.com/u/Folly)\
**Post date:** [August 4, 2020, 1:11pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/3 "2020-08-04T13:11:06Z")

</div>

I think statistics are rounded. Did you hover over the number to get the exact number?

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:23pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/4 "2020-08-04T13:23:30Z")

</div>

With only 678 posts (which hasn’t changed after about four further posts) I am pretty certain that is an exact figure. It doesn’t change with a hover.

As a lurker I have “3.9K” posts read and that does change to 3852 with a hover.

I am now certain that my actual “Topics Created” and “Posts Created” are not updating within a few minutes. Possibly not at all.

TCMF-2L

---

<div class="post-metadata">

**Author:** ![Folly](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/folly/32/3219_2.png) [@Folly](https://boards.straightdope.com/u/Folly)\
**Post date:** [August 4, 2020, 1:25pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/5 "2020-08-04T13:25:00Z")

</div>

Testing testing…

ETA: Yeah, my post created number isn’t going up either, unless there is long delay… hmmm

---

<div class="post-metadata">

**Author:** ![running\_coach](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/running_coach/32/15836_2.png) [@running\_coach](https://boards.straightdope.com/u/running_coach)\
**Post date:** [August 4, 2020, 1:28pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/6 "2020-08-04T13:28:46Z")

</div>

You’re at 679 now.

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:30pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/7 "2020-08-04T13:30:22Z")

</div>

I started with mere suspicions but if my original suspicions were correct the figure still doesn’t update after a few days.

That said I am also suspicious my post count has increased by at least 1 since starting on Discourse so it isn’t completely locked.

TCMF-2L

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:31pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/8 "2020-08-04T13:31:13Z")

</div>

Still showing 678 for me.

TCMF-2L

---

<div class="post-metadata">

**Author:** ![running\_coach](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/running_coach/32/15836_2.png) [@running\_coach](https://boards.straightdope.com/u/running_coach)\
**Post date:** [August 4, 2020, 1:31pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/9 "2020-08-04T13:31:45Z")

</div>

Did you refresh?

---

<div class="post-metadata">

**Author:** ![running\_coach](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/running_coach/32/15836_2.png) [@running\_coach](https://boards.straightdope.com/u/running_coach)\
**Post date:** [August 4, 2020, 1:33pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/10 "2020-08-04T13:33:14Z")

</div>

All your posts in this thread are showing up under “Replies”. It looks like there’s a delay in updating the count.

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:35pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/11 "2020-08-04T13:35:59Z")

</div>

How do I refresh? I click on my name, look at the statistics, then change to reading a thread. Then click on my name again a bit later and look at the statistics. Haven’t seen a “refresh” button. Or do I need to manually log off properly and then log in again?

TCMF-2L

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:39pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/12 "2020-08-04T13:39:20Z")

</div>

To answer my own question:

I logged right off, logged back in and my post count is still 678. Am I doomed to never reach 1000 posts?

TCMF-2L

---

<div class="post-metadata">

**Author:** ![kayaker](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/kayaker/32/441_2.png) [@kayaker](https://boards.straightdope.com/u/kayaker)\
**Post date:** [August 4, 2020, 1:42pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/13 "2020-08-04T13:42:11Z")

</div>

Maybe ity is only counting _quality_ posts.

---

<div class="post-metadata">

**Author:** ![engineer\_comp\_geek](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/engineer_comp_geek/32/504_2.png) [@engineer\_comp\_geek](https://boards.straightdope.com/u/engineer_comp_geek)\
**Post date:** [August 4, 2020, 1:42pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/14 "2020-08-04T13:42:44Z")

</div>

You’re showing 686 now.

I suspect that the counters aren’t incremented in real time. In any event, it’s not something that we have any control over so we’re just going to have to live with how it works, whether it works correctly (if slowly) or not.

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 1:52pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/15 "2020-08-04T13:52:39Z")

</div>

I might be showing as 686 for you (which gives me hope!) but when I look it’s still on 678.

It’s not worth diverting moderator effort to - It’s purely vanity that I seem to asign my personal worth and value to increasing my post count on the SDMB.

That said I noted there is this Trust Level 3 status thing - which I do NOT expect to reach - but clearly there are potential situations where an accurate post count is required. Or at least has benefits.

TCMF-2L

---

<div class="post-metadata">

**Author:** ![TCMF-2L](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tcmf-2l/32/16553_2.png) [@TCMF-2L](https://boards.straightdope.com/u/TCMF-2L)\
**Post date:** [August 4, 2020, 2:08pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/16 "2020-08-04T14:08:58Z")

</div>

If that were the case I wouldn’t even be in double figures.

However my count has now increased from 678 up to 687. I remain suspicious some of my posts aren’t being counted but clearly some are being counted.

TCMF-2L

---

<div class="post-metadata">

**Author:** ![running\_coach](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/running_coach/32/15836_2.png) [@running\_coach](https://boards.straightdope.com/u/running_coach)\
**Post date:** [August 4, 2020, 2:47pm UTC](https://boards.straightdope.com/t/testing-post-count/917249/17 "2020-08-04T14:47:04Z")

</div>

You’re at 688 now.
