# Throwing Manual Transmission into Reverse While Traveling Forward at High Speeds

**URL:** <https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293>\
**Category:** Factual Questions\
**Created:** [July 22, 2002, 11:11pm UTC](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293 "2002-07-22T23:11:18Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![LSLGuy](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/lslguy/32/5813_2.png) [@LSLGuy](https://boards.straightdope.com/u/LSLGuy)\
**Post date:** [October 7, 2011, 2:18pm UTC](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293/21 "2011-10-07T14:18:00Z")

</div>

To put a real fine point on it … Your transmission was expected to last 185,000 miles. It’s now going to last 184,996 miles. Not keeping up with fluid levels & change intervals will do far more to lessen the life than an occasional grind.

---

<div class="post-metadata">

**Author:** ![Gary\_T](https://avatars.discourse-cdn.com/v4/letter/g/3ec8ea/32.png) [@Gary\_T](https://boards.straightdope.com/u/Gary_T)\
**Post date:** [October 7, 2011, 2:27pm UTC](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293/22 "2011-10-07T14:27:45Z")

</div>

> [@jz78817](#):
>
> if you see the howstuffworks link near the top of this thread, you can see that the actual “gears” of the transmission are always engaged. What you’re grinding when you bungle a shift is the collar as it tries to engage the face of the gear.

That’s true of forward speeds, and perhaps a few oddball reverse designs. Most manuals trannys, though, engage reverse by moving an idler gear into mesh with the countershaft reverse gear and the output shaft reverse gear, with no collar or dog teeth. In this design, it is the actual gear teeth that grind into each other. Still, as long as the attempt didn’t actually break a gear tooth, which is usually pretty darn obvious, the extra wear is likely to be inconsequential.

---

<div class="post-metadata">

**Author:** ![Gary\_T](https://avatars.discourse-cdn.com/v4/letter/g/3ec8ea/32.png) [@Gary\_T](https://boards.straightdope.com/u/Gary_T)\
**Post date:** [October 7, 2011, 2:29pm UTC](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293/23 "2011-10-07T14:29:28Z")

</div>

> [@joebuck20](#):
>
> I seem to recall the Mythbusters tested this out a while back. Maybe somebody can refresh my memory as to what ended up happening.

> [@racer72](#):
>
> The car used, a mid 90’s Ford LTD, coasted to a stop without causing much damage. They found out later that the transmission worked as designed. Ford engineers had idiot proofed their transmissions a few years earlier.
> 
> Years ago I drove in some demo derbies and slammed the transmission from drive to reverse and reverse to drive and never broke the transmission. It was damage to other parts that stopped the car, generally from getting clobbered by other cars.

> [@LSLGuy](#):
>
> To put a real fine point on it … Your transmission was expected to last 185,000 miles. It’s now going to last 184,996 miles. Not keeping up with fluid levels & change intervals will do far more to lessen the life than an occasional grind.

These comments are all true with respect to automatic transmissions, but do not apply to manuals.

---

<div class="post-metadata">

**Author:** ![TriPolar](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/tripolar/32/3008_2.png) [@TriPolar](https://boards.straightdope.com/u/TriPolar)\
**Post date:** [October 7, 2011, 3:34pm UTC](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293/24 "2011-10-07T15:34:02Z")

</div>

> [@Gary\_T](#):
>
> That’s true of forward speeds, and perhaps a few oddball reverse designs. Most manuals trannys, though, engage reverse by moving an idler gear into mesh with the countershaft reverse gear and the output shaft reverse gear, with no collar or dog teeth. In this design, it is the actual gear teeth that grind into each other. Still, as long as the attempt didn’t actually break a gear tooth, which is usually pretty darn obvious, the extra wear is likely to be inconsequential.

I’m guessing manual transmissions might fail from excessive grinding once in a while, but in my experience the rest of the car wears out before the transmissions. Reverse may be a little harder on the gears, but I imagine short of breaking a gear (as you mention), simply grinding those incredibly hard gears rarely ruins a transmission. I’ve seen a manual transmission that was buried underground. The entire housing had turned to crumbly oxide. The gears just had a light coat of rust and looked like they could be cleaned up and put back in use. Maybe they were protected by the tranny fluid though.

---

<div class="post-metadata">

**Author:** ![simple\_homer](https://avatars.discourse-cdn.com/v4/letter/s/9de0a6/32.png) [@simple\_homer](https://boards.straightdope.com/u/simple_homer)\
**Post date:** [October 7, 2011, 3:36pm UTC](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293/25 "2011-10-07T15:36:17Z")

</div>

I had a 1988 BMW that I once missed the shift from 5th to 3rd and instead shifted from 5th to 1st while I was going about 60mph.

The clutch shattered.

The mechanic did not find any other damage, just had to replace the clutch.

[Previous page](https://boards.straightdope.com/t/throwing-manual-transmission-into-reverse-while-traveling-forward-at-high-speeds/120293.md?page=1)
