# US Electrical Question

**URL:** <https://boards.straightdope.com/t/us-electrical-question/497963>\
**Category:** Factual Questions\
**Created:** [May 28, 2009, 8:23pm UTC](https://boards.straightdope.com/t/us-electrical-question/497963 "2009-05-28T20:23:41Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![sailor](https://avatars.discourse-cdn.com/v4/letter/s/a587f6/32.png) [@sailor](https://boards.straightdope.com/u/sailor)\
**Post date:** [May 30, 2009, 4:30am UTC](https://boards.straightdope.com/t/us-electrical-question/497963/21 "2009-05-30T04:30:57Z")

</div>

> [@Q.E.D](#):
>
> A [rotary converter](http://www.phaseconverter.com/#Rotary-Converter) (basically a single-phase motor driving a three-phase generator) would be a whole hell of a lot cheaper. A 200-kW unit could run your whole house using a 200-amp service at capacity and still cost 1/5 as much; and just for wood-working equipment he probably wouldn’t need nearly that much.

A 200 KW unit at 240 V would be using about 1000 Amps, not 200 Amps.

> [@Q.E.D](#):
>
> Whatever, dude.

Yes, whatever. KW, phases, Volts, … who cares?

---

<div class="post-metadata">

**Author:** ![Snnipe\_70E](https://avatars.discourse-cdn.com/v4/letter/s/b5a626/32.png) [@Snnipe\_70E](https://boards.straightdope.com/u/Snnipe_70E)\
**Post date:** [May 30, 2009, 6:29am UTC](https://boards.straightdope.com/t/us-electrical-question/497963/22 "2009-05-30T06:29:34Z")

</div>

> [@t-bonham@scc.net](#):
>
> Most such equipment can be adjusted internally to run from either 3 phase/208V or 1 phase/240V. Usually just a matter of moving the wire connections from one set of terminals to another under the cover of the machine.
> 
> I’ve done this on a couple of machines for my brothers’ wood shop – it’s not hard at all, if the machine allows it.

Huh.  
Three phase motors start with out any start circuit. a Single phase motor requires something to split the phase.

---

<div class="post-metadata">

**Author:** ![DanBlather](https://avatars.discourse-cdn.com/v4/letter/d/f4b2a3/32.png) [@DanBlather](https://boards.straightdope.com/u/DanBlather)\
**Post date:** [May 30, 2009, 7:57am UTC](https://boards.straightdope.com/t/us-electrical-question/497963/23 "2009-05-30T07:57:50Z")

</div>

Thanks all. I’m looking at an ice cream freezer case for a store.

---

<div class="post-metadata">

**Author:** ![sailor](https://avatars.discourse-cdn.com/v4/letter/s/a587f6/32.png) [@sailor](https://boards.straightdope.com/u/sailor)\
**Post date:** [May 31, 2009, 4:22am UTC](https://boards.straightdope.com/t/us-electrical-question/497963/24 "2009-05-31T04:22:00Z")

</div>

> [@DanBlather](#):
>
> Thanks all. I’m looking at an ice cream freezer case for a store.

So what are the specs?

[Previous page](https://boards.straightdope.com/t/us-electrical-question/497963.md?page=1)
