# vB coding and "report bad post"

**URL:** https://boards.straightdope.com/t/vb-coding-and-report-bad-post/282889
**Category:** About This Message Board
**Created:** [January 3, 2005, 9:02pm UTC](https://boards.straightdope.com/t/vb-coding-and-report-bad-post/282889 "2005-01-03T21:02:25Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Tapioca\_Dextrin](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tapioca\_Dextrin](https://boards.straightdope.com/u/Tapioca_Dextrin)
#### Post date: [January 3, 2005, 9:02pm UTC](https://boards.straightdope.com/t/vb-coding-and-report-bad-post/282889/1 "2005-01-03T21:02:25Z")

</div>

If I report a bad post and use vB coding, does it come out looking like rubbish on a Mods e-mail?

---

<div class="post-metadata">

### Author: ![xash](https://avatars.discourse-cdn.com/v4/letter/x/c6cbf5/32.png) [@xash](https://boards.straightdope.com/u/xash)
#### Post date: [January 4, 2005, 7:19pm UTC](https://boards.straightdope.com/t/vb-coding-and-report-bad-post/282889/2 "2005-01-04T19:19:08Z")

</div>

It comes to us as plain text, not html or vB code. So we’ll just see the codes in plain text.

Here’s an actual sample of what we receive:

"  
\<sdmb username\> ( mailto:\<member email\> ) has reported this post:

Simpsons bumblebee guy  
[http://boards.straightdope.com/sdmb/showthread.php?postid=5678978#post5678978](http://boards.straightdope.com/sdmb/showthread.php?postid=5678978#post5678978)

This is part of this thread:  
Simpsons bumblebee guy  
[http://boards.straightdope.com/sdmb/showthread.php?threadid=295108](http://boards.straightdope.com/sdmb/showthread.php?threadid=295108)

This is the reason that the user gave:  
cafe society?

This message has been sent to all moderators of this forum, or all administrators if there are no moderators.

Please respond to this post as applicable.  
"

The annoying part of the board software is that if a mod clicks on reply, to reply to the member’s report, the reply shows the board’s email address in the To: field. We have to manually copy/paste the user’s email address from the text to the To: field, which we sometimes forget.
