# What is this screwdriver head pattern called?

**URL:** <https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113>\
**Category:** Factual Questions\
**Created:** [January 3, 2008, 11:53am UTC](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113 "2008-01-03T11:53:11Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![Malacandra](https://avatars.discourse-cdn.com/v4/letter/m/45deac/32.png) [@Malacandra](https://boards.straightdope.com/u/Malacandra)\
**Post date:** [January 10, 2008, 10:31am UTC](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113/21 "2008-01-10T10:31:11Z")

</div>

[QUOTE=JSexton]  
Hm. So why do you need both tamper-proof Torx and regular Torx? Once you have the tamper-proof ones, won’t they work just fine for regular Torx? And the same goes for tamper proof Hex.  
[/QUOTE]

I pondered that when I was shopping for a torx set, but I figured they were probably a little weaker than the regular torx keys - as a matter of fact there was a set on sale that had a broken key already (it had lost one of the splines on one of the smaller keys).

---

<div class="post-metadata">

**Author:** ![Mangetout](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/mangetout/32/19_2.png) [@Mangetout](https://boards.straightdope.com/u/Mangetout)\
**Post date:** [January 10, 2008, 12:11pm UTC](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113/22 "2008-01-10T12:11:14Z")

</div>

From the look of the anti-tamper Torx screw I have here (which I still haven’t undone yet), I’d say that the cylinder of metal in the centre of the pattern probably supports the driver as it turns the screw - making the driver quite durable in that application, whereas if you use the anti-tamper driver in a regular head, there’s nothing to stop it collapsing inwards under stress.

---

<div class="post-metadata">

**Author:** ![Malacandra](https://avatars.discourse-cdn.com/v4/letter/m/45deac/32.png) [@Malacandra](https://boards.straightdope.com/u/Malacandra)\
**Post date:** [January 10, 2008, 12:58pm UTC](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113/23 "2008-01-10T12:58:43Z")

</div>

That’s what I thought, especially as they were Halfords cheapos. So sadly the set of tamper-proof torx keys will have to wait for a genuine occasion. 🙂

---

<div class="post-metadata">

**Author:** ![Uncommon\_Sense](https://avatars.discourse-cdn.com/v4/letter/u/f9ae1b/32.png) [@Uncommon\_Sense](https://boards.straightdope.com/u/Uncommon_Sense)\
**Post date:** [January 10, 2008, 1:29pm UTC](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113/24 "2008-01-10T13:29:54Z")

</div>

[QUOTE=Mangetout]  
From the look of the anti-tamper Torx screw I have here (which I still haven’t undone yet), I’d say that the cylinder of metal in the centre of the pattern probably supports the driver as it turns the screw - making the driver quite durable in that application, whereas if you use the anti-tamper driver in a regular head, there’s nothing to stop it collapsing inwards under stress.  
[/QUOTE]

Yes, and they are making an _even newer_ type of torx wrenches that are not backwards compatible. They kind of work, but are a little sloppy, so keep an eye out for them.  
Here’s the quote from Wiki;

> [@](#):
>
> A TORX variant, TORX PLUS, is designed to allow greater torque, and to minimize wear. Currently, TORX PLUS heads and drivers are patented, slowing adoption in the marketplace. Standard TORX drivers can be used to drive TORX PLUS screws, but TORX PLUS drivers will not fit standard TORX screws. There is also a tamper resistant version of TORX PLUS, having five lobes and solid post in the center. Drivers for the tamper-resistant version are tightly controlled by Camcar, and are sold only to OEMs (along with the fasteners), or OEM-authorized repair facilities.

And don’t buy cheap tools from Harbor Freight and the like. You get what you pay for. Those tools are usually not as durable, not as hard, or not the exact fit. You don’t want to strip the head off a 3.5mm screw - thems are a bitch to get out once the head is mangled.

---

<div class="post-metadata">

**Author:** ![Loach](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/loach/32/350_2.png) [@Loach](https://boards.straightdope.com/u/Loach)\
**Post date:** [January 10, 2008, 1:53pm UTC](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113/25 "2008-01-10T13:53:01Z")

</div>

[QUOTE=Sockmunkey]  
If people decide to ignore the warning stickers about the dangers of tampering it’s their own fault if they get hurt.  
[/QUOTE]

You have obviously not met one of [these.](http://en.wikipedia.org/wiki/Lawyer)

[Previous page](https://boards.straightdope.com/t/what-is-this-screwdriver-head-pattern-called/432113.md?page=1)
