# What's the deal with my pearled barley?

**URL:** <https://boards.straightdope.com/t/whats-the-deal-with-my-pearled-barley/364658>\
**Category:** Cafe Society\
**Created:** [July 15, 2006, 9:20pm UTC](https://boards.straightdope.com/t/whats-the-deal-with-my-pearled-barley/364658 "2006-07-15T21:20:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Corporate\_Hippie](https://avatars.discourse-cdn.com/v4/letter/c/65b543/32.png) [@Corporate\_Hippie](https://boards.straightdope.com/u/Corporate_Hippie)\
**Post date:** [July 15, 2006, 9:20pm UTC](https://boards.straightdope.com/t/whats-the-deal-with-my-pearled-barley/364658/1 "2006-07-15T21:20:14Z")

</div>

A while ago I felt inspired by some threads on the SDMB to start integrating more whole grains into my diet. To that end I went out and bought a bag of ACME brand pearled barley because I remembered having barley in stews and soups and liking it.

So when I decided to try making some, I opted for starting out with just making a plain old pot of the stuff straight up, to get my bearings. I figured I’d add beans or something to it once it was cooked. I took a look at the cooking directions, which go like this:

> [@](#):
>
> In large saucepan, bring 6 cups of water to boil, stir in 1 cup barley. Add 1/2 tsp. salt, if desired. Reduce heat, cover. Simmer 50 to 60 minutes or until tender, stirring occasionally. Makes about six 1 cup servings.

:eek: A 6-to-1 liquid-to-grain ratio? I was shocked. I was used to making white rice, which I know takes a 2-to-1 ratio, and cous cous which is 1-to-1, but 6-to-1? Barley must be some seriously amazing stuff, I thought. I was playing with the big dogs now, these are _WHOLE GRAINS_ .

So I followed the directions carefully (adding the optional salt, because I so desired), and sat back for 50 to 60 minutes to wait for the teeny little barley grains to suck up 6 times their volume in water. When the time came, I eagerly popped off the lid to find… slightly larger barley bits under about an inch of water! :eek: ☹

I was baffled. I drained out a lot of the excess water and kept the stuff simmering, trying to get rid of all that water. The barley seemed tender enough, so finally I just ate the stuff with some beans, but frankly the subtle nutty flavor was drowned out by the \* taste of failure. \* Why didn’t my barley soak up all the water and become big and fluffy? I was only following orders!

I googled pearled barley recipes to see if the 6-to-1 ratio was indeed too good to be true, and I found a whole range of responses. Recipes I found called for anything from 3-to-1 to 5-to-1, but I couldn’t find one that backed up the instructions on my ACME pearled barley bag. So I put it to your infinite Doper wisdom: what is the proper way to cook pearled barley? Is my ACME pearled barley on the level? Is there supposed to be a lot of extra water in the pot when it’s done? Did I just screw something up?

Help!

---

<div class="post-metadata">

**Author:** ![kaylasdad99](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/kaylasdad99/32/3398_2.png) [@kaylasdad99](https://boards.straightdope.com/u/kaylasdad99)\
**Post date:** [July 15, 2006, 9:46pm UTC](https://boards.straightdope.com/t/whats-the-deal-with-my-pearled-barley/364658/2 "2006-07-15T21:46:04Z")

</div>

Maybe you were supposed to also consume the unabsorbed water; you know, like a porridge.