# Why do music chords sound "good"?

**URL:** <https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016>\
**Category:** Factual Questions\
**Created:** [October 21, 2014, 12:00pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016 "2014-10-21T12:00:53Z")\
**Posts on this page:** 11\
**Page:** 3

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [October 23, 2014, 1:02pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/41 "2014-10-23T13:02:48Z")

</div>

> [@CalMeacham](#):
>
> > [@ZenBeam](#):
> >
> > A xylophone isn’t simply supported, though. The bars are supported a distance in from the ends. I’ve always assumed they are supported at the nodes of the fundamental mode, but I don’t know this.
> 
> That is the very definition of “simply supported” – it means that the bar rests on those points, but is not clamped.

The definitions of “simply supported” that I found were that the bar was supported at the ends.

> [@](#):
>
> When you say that glockenspiels “are supported at the end, which tends to dampen the overtones”, it means that they aren’t quite “simply” supported.

I never said that they are supported at the ends. I said they are supported at the nodes of the fundamental mode. I guess I could have been more clear and said the fundamental mode _of the freely vibrating bar._ But I did say the bars are supported some distance in from the ends, so it couldn’t be a simply supported bar, at least by the definitions of simply supported that I can find. If you went to the link, it would make clear that the support is indeed at the nodes of the fundamental mode of the freely vibrating bar.

> [@](#):
>
> In a truly simply supported beam, the overtones aren’t dampened at all. Many xylophone=type instruments have the bars resting as freely as possible on the supports, with some light restraints to keep the bars from jumping or falling off. Glockenspiels, especially those carried in marching bands, have to be a little more robust, since they’re moving around, but they’re still kept as free as possible. That characteristic ringing tone they produce, that cuts through a lot of other sound IS the fundamental plus overtones. I find it hard to believe that the overtones are significantly dampened.

If you look at a glockenspiel, the bars clearly aren’t supported at the ends. What definition of “simply supported” are you using?

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [October 23, 2014, 1:06pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/42 "2014-10-23T13:06:14Z")

</div>

OK, I see in your reply to **MikeS** that you seem to be using the standard definiton of simply supported. Xylophone and glockenspiel bars are not simply supported.

---

<div class="post-metadata">

**Author:** ![CalMeacham](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/calmeacham/32/35_2.png) [@CalMeacham](https://boards.straightdope.com/u/CalMeacham)\
**Post date:** [October 23, 2014, 2:17pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/43 "2014-10-23T14:17:56Z")

</div>

> [@ZenBeam](#):
>
> OK, I see in your reply to **MikeS** that you seem to be using the standard definiton of simply supported. Xylophone and glockenspiel bars are not simply supported.

Xylophone bars certainly are simply supported. For most practical purposes, so are glockenspiels.

How do you think they are different?

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [October 23, 2014, 2:25pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/44 "2014-10-23T14:25:28Z")

</div>

> [@CalMeacham](#):
>
> Xylophone bars certainly are simply supported. For most practical purposes, so are glockenspiels.
> 
> How do you think they are different?

I’ve already said how I think they are different. Simply suported means the bar is supported at the _very ends_ of the bar. Xylophone and glockenspiel bars are not supported at the ends. They are supported at the nodes of the fundamental mode of the freely vibrating bar. Look at the chart on the bottom right of page 2 of the link I gave. The bar is supported 0.224L in from the ends, where L is the bar length. That is not the same as simply supported.

---

<div class="post-metadata">

**Author:** ![CalMeacham](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/calmeacham/32/35_2.png) [@CalMeacham](https://boards.straightdope.com/u/CalMeacham)\
**Post date:** [October 23, 2014, 2:43pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/45 "2014-10-23T14:43:49Z")

</div>

> [@ZenBeam](#):
>
> I’ve already said how I think they are different. Simply suported means the bar is supported at the _very ends_ of the bar. Xylophone and glockenspiel bars are not supported at the ends. They are supported at the nodes of the fundamental mode of the freely vibrating bar. Look at the chart on the bottom right of page 2 of the link I gave. The bar is supported 0.224L in from the ends, where L is the bar length. That is not the same as simply supported.

In a practical system this difference is negligible – no one puts the supports in a xylophone at the very ends of the bar, because it would fall off. The position of the supports defines where the nodes are. The fundamental frequency and the modes depend upon the distance between the supports, rather than the actual bar length, but that’s a trivial point. There are some corrections that would need to bge added, in a strict mathematical sense, but the Euler-Bernoulli beam equatioin itself is a simplification and requires corrections for strict accuracy (it doesn’t include rotation of the elements during vibration, for instance).

To say a xylophone bar isn’t “simply supported” seems to me simply perverse. Simplly supported beam theory gives you the vibration modes and the frequencies you require. To say that the beam has to be supported at the very ends is absurdly pedantic.

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [October 23, 2014, 3:16pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/46 "2014-10-23T15:16:10Z")

</div>

You’re worng that it’s a negligible.difference. 0.224L, from both ends, is not negligible. The distance between supports is almost a factor of 2.

---

<div class="post-metadata">

**Author:** ![CalMeacham](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/calmeacham/32/35_2.png) [@CalMeacham](https://boards.straightdope.com/u/CalMeacham)\
**Post date:** [October 23, 2014, 4:13pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/47 "2014-10-23T16:13:15Z")

</div>

> [@ZenBeam](#):
>
> You’re worng that it’s a negligible.difference. 0.224L, from both ends, is not negligible. The distance between supports is almost a factor of 2.

In most real xylophones and the like the difference in result is negliugible. And the mechanical engineers I’ve interacted with use “simply supported” in the same sense I do,

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [October 23, 2014, 5:08pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/48 "2014-10-23T17:08:36Z")

</div>

Perhaps you could quantify how “negligible” the differences are for the first few modes?

---

<div class="post-metadata">

**Author:** ![CalMeacham](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/calmeacham/32/35_2.png) [@CalMeacham](https://boards.straightdope.com/u/CalMeacham)\
**Post date:** [October 23, 2014, 5:45pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/49 "2014-10-23T17:45:03Z")

</div>

> [@ZenBeam](#):
>
> Perhaps you could quantify how “negligible” the differences are for the first few modes?

Can’t do that right now. Maybe after work.

By the way – your number of 0.224 L is irrelevant to me. Why do I care what the distance between the supports in some system you have is? My statement was for the general case of a simply supported beam with small overhang. Although an orchestral instrument will have shaped bars for perfect tuning, there are examples of bars of uniform cross-section and simply different lengths (and only slight overhang) providing a full scale. The Boston Museum of Science has one such example, made of rock cores.

In any event, the paper I link to above shows that the overtones are multiples of the fundamental.

As for a bar with non-negligible but significant overhang (not the example I was giving), this paper seems to have the details, but only the first page is free:

> **[Natural Frequency of Beam | PDF | Beam (Structure) | Determinant](https://www.scribd.com/document/36602812/Natural-Frequency-of-Beam)**
>
> The numerical solution to the frequency equation for the transverse vibration of a simple beam with symmetric overhang is found. Numerical results agree with the case in which the supports are at the nodal points of a freely vibrating beam. This...

---

<div class="post-metadata">

**Author:** ![ZenBeam](https://avatars.discourse-cdn.com/v4/letter/z/3ab097/32.png) [@ZenBeam](https://boards.straightdope.com/u/ZenBeam)\
**Post date:** [October 23, 2014, 10:46pm UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/50 "2014-10-23T22:46:53Z")

</div>

> [@CalMeacham](#):
>
> Why do I care what the distance between the supports in some system you have is?

Because it will affect the relative frequencies of the fundamental and the overtones.

---

<div class="post-metadata">

**Author:** ![handsomeharry](https://avatars.discourse-cdn.com/v4/letter/h/e9c0ed/32.png) [@handsomeharry](https://boards.straightdope.com/u/handsomeharry)\
**Post date:** [October 24, 2014, 8:28am UTC](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016/51 "2014-10-24T08:28:43Z")

</div>

Has anybody discovered why D minor is the saddest of all keys?  
People have been known to burst into tears instantly when they’ve heard it.

[Previous page](https://boards.straightdope.com/t/why-do-music-chords-sound-good/702016.md?page=2)
