# Why doesn't a soda-pop can "overfizz" after it falls inside the dispensing machine? **URL:** \ **Category:** Factual Questions\ **Created:** [February 11, 2019, 12:40pm UTC](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333 "2019-02-11T12:40:05Z")\ **Posts on this page:** 5\ **Page:** 2
**Author:** ![Musicat](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/musicat/32/20189_2.png) [@Musicat](https://boards.straightdope.com/u/Musicat)\ **Post date:** [February 24, 2019, 1:10pm UTC](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333/21 "2019-02-24T13:10:36Z")
> [@albino\_manatee](#): > > happened often enough in the past for me … about 1 outta’ 7 would have the sustained energy to _‘fizz’_. i then learned to _‘snap’_ the can once or twice with the fingernail of my index-finger … and the bubbles which had attached themselves to the inside wall of the can would dissipate … Pssst… [looky here.](https://www.livescience.com/34159-tap-soda-can-carbonation.html) And [here.](https://www.sciencefocus.com/science/does-tapping-the-can-stop-a-drink-fizzing-over-when-you-open-it/) > [@](#): > > Tapping the sides of the can before you open it might help to dislodge the bubbles, so the gas is all at the top of the can and there are fewer nucleation sites. But it’s only partially effective. Leaving the can to stand for a minute works better. And most importantly, [here.](https://www.straightdope.com/columns/read/1034/will-tapping-a-pop-can-keep-the-carbonation-from-exploding-on-opening/) > [@](#): > > So you may well be right that what tapping chiefly does is kill time, an issue to which I perhaps gave inadequate attention in my original column. But that doesn’t change my main point, which is that tapping per se doesn’t do squat. Next week, we’ll examine what tapping does to ciggies… ---
**Author:** ![Gbro](https://avatars.discourse-cdn.com/v4/letter/g/c6cbf5/32.png) [@Gbro](https://boards.straightdope.com/u/Gbro)\ **Post date:** [February 26, 2019, 1:43am UTC](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333/22 "2019-02-26T01:43:08Z")
Have you ever used a Pop-Shop carbonation device/ [Or This](https://sodastream.com/products/one-touch-starter-kit?variant=14199029825578&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQiAwc7jBRD8ARIsAKSUBHK_TrDrBU9Y5z3D_emXmBg9vffhMhgLD4YgH60GTfzI2ytWRpoaLAsaAsi5EALw_wcB) Soda Stream carbonation device? C0-2 is forced into solution like nitrogen to a diver using SCUBA. When we pull the tab on a soda can its like a diver surfacing from deep and the gas that is held in solution is freed and we see it in the bubbles because of the surface tension of the liquid. Now shake up a can of soda and hand it to your buddy and unsuspecting he opens it and a jolly mess is seen. Now with a Cold can, shake it up real good then put a good hard squeeze to it for 10-15 seconds then release the squeeze “Slowly” and pop it open. Done correctly(Gas forced back into solution) it will be back in the same state of fizz as before the shaking. ---
**Author:** ![nightshadea](https://avatars.discourse-cdn.com/v4/letter/n/7ba0ec/32.png) [@nightshadea](https://boards.straightdope.com/u/nightshadea)\ **Post date:** [February 26, 2019, 2:09am UTC](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333/23 "2019-02-26T02:09:42Z")
I remember in some of the non refrigerated machines (although they died out in the 70s lots of backcountry no electricity places still had then ) they did go over occasionally …which is why older people would wait to open a soda from a machine ---
**Author:** ![Inigo\_Montoya](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/inigo_montoya/32/124_2.png) [@Inigo\_Montoya](https://boards.straightdope.com/u/Inigo_Montoya)\ **Post date:** [February 26, 2019, 3:57pm UTC](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333/24 "2019-02-26T15:57:52Z")
When I was a kid we used to like to spritz each other with a freshly opened can o pop. I recall root beer provided the best distance and volume of ordnance. These days, it doesn’t seem to be as dramatically different from other beverages. Am I imagining that, or is corn syrup killing soda pop as well? ---
**Author:** ![pdhenry](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/pdhenry/32/5561_2.png) [@pdhenry](https://boards.straightdope.com/u/pdhenry)\ **Post date:** [February 27, 2019, 10:11pm UTC](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333/25 "2019-02-27T22:11:01Z")
> [@TRC4941](#): > > I’ve never noticed it happening with pop in cans either. But…when I buy a diet Coke in a plastic bottle from a machine, I always twist open the top very slowly to let some of the air out because it will foam up. It doesn’t shoot all over, but it will foam over the neck of the bottle sometimes. I think Diet Coke (and the ilk) release carbonation more readily than sugar/HFCS-sweetened soda. It’s why the Mentos demonstration uses Diet Coke. [Previous page](https://boards.straightdope.com/t/why-doesnt-a-soda-pop-can-overfizz-after-it-falls-inside-the-dispensing-machine/829333.md?page=1)