# Why so many bad USB sockets lately?

**URL:** <https://boards.straightdope.com/t/why-so-many-bad-usb-sockets-lately/646608>\
**Category:** Factual Questions\
**Created:** [January 9, 2013, 10:12am UTC](https://boards.straightdope.com/t/why-so-many-bad-usb-sockets-lately/646608 "2013-01-09T10:12:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dog80](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@Dog80](https://boards.straightdope.com/u/Dog80)\
**Post date:** [January 9, 2013, 10:12am UTC](https://boards.straightdope.com/t/why-so-many-bad-usb-sockets-lately/646608/1 "2013-01-09T10:12:16Z")

</div>

I’ve noticed lately that a lot of devices that have a USB socket (hubs, chargers, whatever) won’t work if the male USB is pushed all the way in.

In most cases pulling it back a bit will make it work, so I guess the problem is that pins do not align properly. I have seen this behavior even in expensive, high quality devices, like the charger from a Samsung Note II or the USB host of a digital oscilloscope.

I have been using USB stuff since they came out (is it 10 or 15 years ago?) and I don’t remember ever having this problem except maybe with some really dodgy, crappy devices.

Is it due to a batch of bad sockets or did they change the specifications?

---

<div class="post-metadata">

**Author:** ![Obnoxious\_Hood\_Ornament](https://avatars.discourse-cdn.com/v4/letter/o/3be4f8/32.png) [@Obnoxious\_Hood\_Ornament](https://boards.straightdope.com/u/Obnoxious_Hood_Ornament)\
**Post date:** [January 9, 2013, 2:20pm UTC](https://boards.straightdope.com/t/why-so-many-bad-usb-sockets-lately/646608/2 "2013-01-09T14:20:00Z")

</div>

I’m not an expert in the field, but I’d attribute it to two developments:

1 - USB is orders of magnitude more popular than it was ten years ago. It has become a high volume commodity connector (compared to, say, firewire), so manufacturing has naturally gravitated toward outfits that can produce them inexpensively. You see where I’m going with this.

2 - Connector density has increased. IIRC there have been two separate revisions of the sockets and connectors (USB 2, then 3). Each revision added new pins… er, stripes I guess. Connector seating is now more important than before.

I’ve noticed similar issues recently, if it makes you feel better 🙂

---

<div class="post-metadata">

**Author:** ![Saint\_Cad](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/saint_cad/32/18907_2.png) [@Saint\_Cad](https://boards.straightdope.com/u/Saint_Cad)\
**Post date:** [January 9, 2013, 3:04pm UTC](https://boards.straightdope.com/t/why-so-many-bad-usb-sockets-lately/646608/3 "2013-01-09T15:04:11Z")

</div>

I’m glad others are having the same problems. I was getting frustratied with “I plugged it in. Why isn’t it recognized?”

---

<div class="post-metadata">

**Author:** ![Si\_Amigo](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/si_amigo/32/2877_2.png) [@Si\_Amigo](https://boards.straightdope.com/u/Si_Amigo)\
**Post date:** [January 9, 2013, 3:19pm UTC](https://boards.straightdope.com/t/why-so-many-bad-usb-sockets-lately/646608/4 "2013-01-09T15:19:22Z")

</div>

I’ve noticed that while the wall warts we getting the better the actual cables themselves are getting worst. Never have a problem at the wall adapter or on the device itself; all problems I’ve had have been fixed by throwing out the cheap ass cable and replacing it with a new one.
