# Wind turbine questions

**URL:** <https://boards.straightdope.com/t/wind-turbine-questions/706012>\
**Category:** Factual Questions\
**Created:** [December 1, 2014, 5:07am UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012 "2014-12-01T05:07:29Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 1, 2014, 10:58pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/21 "2014-12-01T22:58:40Z")

</div>

> [@The\_Second\_Stone](#):
>
> That figure multiplies to total population by three and then assumes annual full extinction.

Or, possibly, that Golden Eagles migrate.

---

<div class="post-metadata">

**Author:** ![The\_Second\_Stone](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@The\_Second\_Stone](https://boards.straightdope.com/u/The_Second_Stone)\
**Post date:** [December 2, 2014, 12:57am UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/22 "2014-12-02T00:57:16Z")

</div>

> [@Xema](#):
>
> Or, possibly, that Golden Eagles migrate.

Some migrate, but most remain in a territory. [Golden eagle - Wikipedia](http://en.wikipedia.org/wiki/Golden_eagle)

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 2, 2014, 1:52am UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/23 "2014-12-02T01:52:24Z")

</div>

> [@The\_Second\_Stone](#):
>
> Some migrate, but most remain in a territory. [Golden eagle - Wikipedia](http://en.wikipedia.org/wiki/Golden_eagle)

From your link:

> [@](#):
>
> the entire population of golden eagles from northern and central Alaska and northern Canada migrates south. At Mount Lorette in Alberta, approximately 4,000 golden eagles may pass during the fall, the largest recorded migration of golden eagles on earth. Here the mountain ranges are relatively moderate and consistent, thus being reliable for thermals and updrafts which made long-distance migrating feasible.Birds hatched in Denali National Park in Alaska traveled from 818 to 4,815 km (508 to 2,992 mi) to their winter ranges in western North America. These western migrants may winter anywhere from southern Alberta and Montana to New Mexico and Arizona and from inland California to Nebraska.

---

<div class="post-metadata">

**Author:** ![The\_Second\_Stone](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@The\_Second\_Stone](https://boards.straightdope.com/u/The_Second_Stone)\
**Post date:** [December 2, 2014, 4:29am UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/24 "2014-12-02T04:29:41Z")

</div>

and if any by coincidence came to the Altamont Pass, they had to keep moving because the range is occupied the entire year around by full time inhabitants. An eagle that took more than a hour to move through the area at less than can’t be seen by human altitude is going to find a territorial fight on its hands.

I see a lot of birds of prey dead at the bottom of electrical utility poles. Not around wind mills.

Take a look at the map on the article. Virtually no goldens are California part time residents.

---

<div class="post-metadata">

**Author:** ![levdrakon](https://avatars.discourse-cdn.com/v4/letter/l/49beb7/32.png) [@levdrakon](https://boards.straightdope.com/u/levdrakon)\
**Post date:** [December 2, 2014, 4:37am UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/25 "2014-12-02T04:37:28Z")

</div>

> [@Ken001](#):
>
> Wind turbines have their place but only where there is a constant reliable wind which translates to only a few places around the world.
> 
> Solar energy has good possibilities now that more efficient panels are being made but only in sunny places and you better be up for the cost of batteries and inverters. The panels are the cheap bit.

1970’s called. Higher altitude winds are increasingly accessible and that’s most of the planet, not “a few places.”

Germany is sunny all the time? Who knew? I lived there and never noticed.

---

<div class="post-metadata">

**Author:** ![Ken001](https://avatars.discourse-cdn.com/v4/letter/k/43a26b/32.png) [@Ken001](https://boards.straightdope.com/u/Ken001)\
**Post date:** [December 2, 2014, 7:57am UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/26 "2014-12-02T07:57:04Z")

</div>

> [@levdrakon](#):
>
> 1970’s called. Higher altitude winds are increasingly accessible and that’s most of the planet, not “a few places.”

Yes quite right and my bad. :smack:

I was thinking about tidal currents going through straits which could be used for generating electricity. There are not many places around the globe where the flow is strong and consistent enough and close to population centers.

---

<div class="post-metadata">

**Author:** ![Ethilrist](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/ethilrist/32/4604_2.png) [@Ethilrist](https://boards.straightdope.com/u/Ethilrist)\
**Post date:** [December 2, 2014, 1:21pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/27 "2014-12-02T13:21:29Z")

</div>

> [@Deeg](#):
>
> I have a question: why are fewer, longer blades better than shorter, wider blades?

From the point of view of the birds, slower blades are easier to spot & dodge, as indicated by **The Second Stone.** Also, with the axis higher off the ground (and above the bird’s cruise altitude), the blades spend more time in air that won’t affect the birds.

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 2, 2014, 2:54pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/28 "2014-12-02T14:54:13Z")

</div>

> [@The\_Second\_Stone](#):
>
> and if any by coincidence came to the Altamont Pass, they had to keep moving because the range is occupied the entire year around by full time inhabitants.

Moving is what migrants do. You surely aren’t saying they can’t pass through areas where year-round birds are found, are you?  
[/QUOTE]

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 2, 2014, 3:22pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/29 "2014-12-02T15:22:34Z")

</div>

> [@engineer\_comp\_geek](#):
>
> You need at least two blades to create a balanced turbine.

Not really - here’s a [single-blade wind turbine](http://www.mnn.com/earth-matters/energy/photos/9-ingenious-wind-turbine-designs/powerhouse-thinair-single-blade-turbine).

> [@](#):
>
> if the blades are too long the tips can start to go supersonic

Probably impossible, in any practical sense. Most wind turbines operate with tip speed ratios under 10 (i.e. tip speed is less than 10 times wind speed) - and of course they must feather when wind gets really strong.

Here’s a link to a list of common [industrial wind turbines](http://www.aweo.org/windmodels.html). Max blade tip speeds range from 138 to 232 mph. I’d guess that the blades of every one of these would destroy themselves at less than 1.5 times max speed. (It would make no sense to incur the cost of producing a blade able to operate far outside its turbine’s design limits).

---

<div class="post-metadata">

**Author:** ![Chronos](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/chronos/32/134_2.png) [@Chronos](https://boards.straightdope.com/u/Chronos)\
**Post date:** [December 2, 2014, 3:48pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/30 "2014-12-02T15:48:03Z")

</div>

While a one-blade turbine might be possible, it sounds like a lose-lose proposition to me. You still need some sort of counterweight, and that counterweight is going to be adding moment of inertia and drag without adding any collection area to make up for it.

---

<div class="post-metadata">

**Author:** ![Stranger\_On\_A\_Train](https://avatars.discourse-cdn.com/v4/letter/s/13edae/32.png) [@Stranger\_On\_A\_Train](https://boards.straightdope.com/u/Stranger_On_A_Train)\
**Post date:** [December 2, 2014, 8:07pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/31 "2014-12-02T20:07:40Z")

</div>

Rotor blades are not only designed to balance the “rigid body” (non-flexing) moments of inertia, but also balance the modal (flexing) modes to reduce fatigue stress and unbalanced torsional modes. In other words, a single blade is going to flap like a flag as it rotates with the torque at the root being only resisted by the geometric section of the pylon. With two or more evenly spaced blades and appropriate aerofoil design the parasitic and potentially destructive modes can be minimized by making the rotational center also the inflection point for the primary modes. It is possible to design a balanced single blade rotor as show, but it compromises maximal energy recovery for other benefits (lower parts count, less effective mass, et cetera).

Stranger

---

<div class="post-metadata">

**Author:** ![eschereal](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/eschereal/32/18939_2.png) [@eschereal](https://boards.straightdope.com/u/eschereal)\
**Post date:** [December 2, 2014, 9:12pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/32 "2014-12-02T21:12:11Z")

</div>

I guess one big drawback to vertical axis turbines is that they are a little less than 50% effective, as the part that captures the wind force must move upwind on the back side. Horizontal axis turbines are capturing wind power more or less evenly for the full cycle of each blade.

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 2, 2014, 9:43pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/33 "2014-12-02T21:43:54Z")

</div>

> [@Stranger\_On\_A\_Train](#):
>
> Rotor blades are not only designed to balance the “rigid body” (non-flexing) moments of inertia, but also balance the modal (flexing) modes to reduce fatigue stress and unbalanced torsional modes. In other words, a single blade is going to flap like a flag as it rotates with the torque at the root being only resisted by the geometric section of the pylon.

In the case of the single-blade turbine mentioned above, this issue is neatly handled by means of a [“teetering” hub](http://www.powerhousewind.co.nz/products.htm) - the blade is free to fold in or out as the airflow dictates, so forces on the pylon are low.

As the pictures show, this also allows for passive ‘feathering’ in strong wind.

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 2, 2014, 9:58pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/34 "2014-12-02T21:58:25Z")

</div>

> [@Chronos](#):
>
> You still need some sort of counterweight, and that counterweight is going to be adding moment of inertia and drag without adding any collection area to make up for it.

The counterweight looks plenty small enough that the drag would not be a big deal. And additional moment of inertia probably isn’t a big problem in a device that is typically trying to operate at a constant rpm.

Offsetting these issues are the cost savings of a single blade and the fact that it gets to operate in air that hasn’t been disturbed other blades.

---

<div class="post-metadata">

**Author:** ![The\_Second\_Stone](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@The\_Second\_Stone](https://boards.straightdope.com/u/The_Second_Stone)\
**Post date:** [December 2, 2014, 10:14pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/35 "2014-12-02T22:14:58Z")

</div>

> [@Xema](#):
>
> Moving is what migrants do. You surely aren’t saying they can’t pass through areas where year-round birds are found, are you?

[/QUOTE]

If they are not seen, yes. Goldens are highly territorial and they will fight each other. Golden eagles were used in Asia to fight wolves. Everything else in the sky backs off when they assert dominance. If they wish to pass through, they had best be quick about it and not seen and have a long head start and altitude if they are seen “passing through”. Sedentary golden eagles are in pairs that mate for life, so there is at least one ally nearby.

---

<div class="post-metadata">

**Author:** ![Ethilrist](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/ethilrist/32/4604_2.png) [@Ethilrist](https://boards.straightdope.com/u/Ethilrist)\
**Post date:** [December 3, 2014, 1:54pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/36 "2014-12-03T13:54:50Z")

</div>

Okay, that’s good to know… however, the number of dead golden eagles found at Altamount has dropped since they stopped using the older, shorter, faster turbines. Are you saying that all the migrating eagles got killed by locals and the reports that they’re migrating are wrong?

---

<div class="post-metadata">

**Author:** ![Xema](https://avatars.discourse-cdn.com/v4/letter/x/9de053/32.png) [@Xema](https://boards.straightdope.com/u/Xema)\
**Post date:** [December 3, 2014, 4:22pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/37 "2014-12-03T16:22:20Z")

</div>

> [@The\_Second\_Stone](#):
>
> Goldens are highly territorial and they will fight each other.

They will if they perceive a valid threat - e.g. another eagle hanging around, poaching prey or looking to encroach on their territory. But it would be of less than no value to pick fights with birds that are moving through anyway, posing no threat.

The article you linked makes it clear that plenty of migration passes through areas where some golden eagles are resident.

---

<div class="post-metadata">

**Author:** ![MikeF](https://avatars.discourse-cdn.com/v4/letter/m/45deac/32.png) [@MikeF](https://boards.straightdope.com/u/MikeF)\
**Post date:** [December 3, 2014, 7:04pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/38 "2014-12-03T19:04:33Z")

</div>

Back to blade design - why do some blades have a “dip” in the face of the blade towards the tip? I don’t know how else to describe it. I couldn’t find an image that shows it well but it pretty obvious on the turbines near me.

---

<div class="post-metadata">

**Author:** ![Bill\_Door](https://avatars.discourse-cdn.com/v4/letter/b/50afbb/32.png) [@Bill\_Door](https://boards.straightdope.com/u/Bill_Door)\
**Post date:** [December 3, 2014, 7:46pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/39 "2014-12-03T19:46:25Z")

</div>

> [@Deeg](#):
>
> I have a question: why are fewer, longer blades better than shorter, wider blades?

Not disagreeing with what **engineer\_comp\_geek** said, just expanding on it. It’s a question of solidity, which is the ratio of the total area of the blades compared to the area swept by the blades. A high solidity turbine, think of the old Dutch windmill, spins slowly with high torque. Very useful for applications like pumping water where high torque is needed. Low solidity turbines spin rapidly with less torque which is what you want for generating electricity.

I suppose you could use a slow speed high torque arrangement and a gearbox, but that introduces extra expense and inefficiencies in power transmission.

---

<div class="post-metadata">

**Author:** ![Machine\_Elf](https://avatars.discourse-cdn.com/v4/letter/m/82dd89/32.png) [@Machine\_Elf](https://boards.straightdope.com/u/Machine_Elf)\
**Post date:** [December 3, 2014, 8:05pm UTC](https://boards.straightdope.com/t/wind-turbine-questions/706012/40 "2014-12-03T20:05:32Z")

</div>

> [@MikeF](#):
>
> Back to blade design - why do some blades have a “dip” in the face of the blade towards the tip? I don’t know how else to describe it. I couldn’t find an image that shows it well but it pretty obvious on the turbines near me.

Something like the [raked wingtips on the Boeing 787?](http://en.wikipedia.org/wiki/Raked_wingtips#Raked_wingtip) For aircraft, it reduces inefficiencies associated with tip vortices, and iincreases lift without increasing span (causing a smaller increase in wing bending loads than one would observe with a simple increase in wingspan). Presumable the same is true for wind turbines: reduced tip-vortex losses, and increased rotor torque without the bending loads that would be associated with using just a larger-diameter turbine.

[Previous page](https://boards.straightdope.com/t/wind-turbine-questions/706012.md?page=1)

[Next page](https://boards.straightdope.com/t/wind-turbine-questions/706012.md?page=3)
