# Windows networking. How to select which interface to use for Internet?

**URL:** <https://boards.straightdope.com/t/windows-networking-how-to-select-which-interface-to-use-for-internet/635870>\
**Category:** Factual Questions\
**Created:** [September 26, 2012, 9:26am UTC](https://boards.straightdope.com/t/windows-networking-how-to-select-which-interface-to-use-for-internet/635870 "2012-09-26T09:26:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dog80](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@Dog80](https://boards.straightdope.com/u/Dog80)\
**Post date:** [September 26, 2012, 9:26am UTC](https://boards.straightdope.com/t/windows-networking-how-to-select-which-interface-to-use-for-internet/635870/1 "2012-09-26T09:26:49Z")

</div>

I am running Windows 7 x64 and connect to the internet through wifi. But at the same time I am configuring my Cisco router and when I connect the ethernet cable to the computer, the internet goes down.

It seems that in Windows, ethernet has precedence over wifi and when there’s a wired network connection present it will route everything through that.

Is there any way to select which interface internet will go through?

---

<div class="post-metadata">

**Author:** ![Dog80](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@Dog80](https://boards.straightdope.com/u/Dog80)\
**Post date:** [September 26, 2012, 9:31am UTC](https://boards.straightdope.com/t/windows-networking-how-to-select-which-interface-to-use-for-internet/635870/2 "2012-09-26T09:31:38Z")

</div>

I should mention here that even when the router is unconfigured (no IP or DHCP set) the internet will still go down when the cable is connected. Just sensing a cable connection will be enough to route everything there, even if there’s no valid network there.

---

<div class="post-metadata">

**Author:** ![si\_blakely](https://avatars.discourse-cdn.com/v4/letter/s/d9b06d/32.png) [@si\_blakely](https://boards.straightdope.com/u/si_blakely)\
**Post date:** [September 26, 2012, 10:32am UTC](https://boards.straightdope.com/t/windows-networking-how-to-select-which-interface-to-use-for-internet/635870/3 "2012-09-26T10:32:49Z")

</div>

The value you are looking for is called the Metric - here is a link on changing [interface metrics](http://www.howtogeek.com/howto/27994/how-to-change-the-priority-of-wiredwireless-network-cards-in-windows/)

Si

---

<div class="post-metadata">

**Author:** ![Dog80](https://avatars.discourse-cdn.com/v4/letter/d/6bbea6/32.png) [@Dog80](https://boards.straightdope.com/u/Dog80)\
**Post date:** [September 26, 2012, 10:50am UTC](https://boards.straightdope.com/t/windows-networking-how-to-select-which-interface-to-use-for-internet/635870/4 "2012-09-26T10:50:16Z")

</div>

Thanks! I’ll give it a try
