# Wireless meat thermometers
**URL:** https://boards.straightdope.com/t/wireless-meat-thermometers/1026211
**Category:** Cafe Society
**Tags:** food-cooking
**Created:** [December 31, 2025, 5:52pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211 "2025-12-31T17:52:14Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@puzzlegal](https://boards.straightdope.com/u/puzzlegal)
#### Post date: [December 31, 2025, 5:52pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/1 "2025-12-31T17:52:14Z")
Continuing the discussion from [Can this overcooked roast be saved?](https://boards.straightdope.com/t/can-this-overcooked-roast-be-saved/1026077/44):
> [@Can this overcooked roast be saved?](https://boards.straightdope.com/t/can-this-overcooked-roast-be-saved/1026077/44):
>
> They are just two different brands. There are several, now. These are the two I’ve purchased and used.
>
> Meater: i bought the “meater block” back when it was a Kickstarter. It’s an attractive block of wood that plugs in, and holds/charges 4 separate probes. I’ve never used more than 2 at once, Ave haven’t even taken the tag off one of them. The block talks to my phone by Wi-Fi, and has good range. Sometimes the block and the probe lose contact (after all, the probe is in a big metal box, aka, the oven) but so long as i leave the block really close to the oven, it works.
>
> Mine is old, and only has one temperature sensor. (The new ones have a few, so you don’t have to be very careful about placing it.) It makes a fairly fat hole, and it can be hard to grip the probe to remove it. It’s been pretty reliable.
>
> Combustion: i think this was the first to have a bunch of sensors up and down the probe, including the exterior. It is much thinner, so you can put it in a steak. It’s easy enough to remove. It talks to my phone over blue tooth, very reliably because it doesn’t need to pair. (Don’t buy this is you are worried about your neighbors knowing how hot your meat is) But the range is mediocre, and although either the probes or the additional gadget i bought so i don’t need to use my phone if supposed to use Wi-Fi, i never succeeded in setting it up. It reliably talks to my phone if I’m in the kitchen, but i sometimes lose signal if i go to another room.
>
> The multiple sensors are nice. The external one doesn’t tell you how hot your oven is, because it’s close enough to the roast that the roast keeps it cooler. You do have a very good sense of the exterior temp of your food, should you be interested.
>
> It gives a lot of detail, which you can also hide if you prefer. (So, anything from a colored graph of every sensor over time to a single number for the “core” temperature, which is just whichever is coolest. It also has a magic feature of knowing the integrated FDA food safety charts (integrated time and temp) so if you want to cook your chicken to 150 and know it’s pasteurized, it will tell you that. It’s messier when not in use, because each probe has it’s own charging sleeve, and each one needs to be plugged in. (The sleeve has a battery, and holds a charge for a long time. But just leaving it plugged in is so much easier.)
>
> In practice, i usually use the combustion, and have two of them.
>
> The exterior of these probes (all brands) is designed to be safe in ovens and even in hot grills. But the interior (usually protected by the food) contains a battery and is more fragile. I killed a combustion probe by forgetting that and trying to use it as on oven thermometer.
---
### Author:  [@puzzlegal](https://boards.straightdope.com/u/puzzlegal)
#### Post date: [December 31, 2025, 5:53pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/2 "2025-12-31T17:53:16Z")
I decided this is a hijack in the other thread, and also, might be off interest to people who weren’t following it. So this is a thread to discuss wireless meat thermometers. And other meat thermometers, if you like.
---
### Author:  [@scabpicker](https://boards.straightdope.com/u/scabpicker)
#### Post date: [December 31, 2025, 6:01pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/3 "2025-12-31T18:01:27Z")
I’ve got an older ThermoWorks dual probe thermometer, the “Smoke”. It works really well. You have a probe that you can use to get the temp in the smoker, and another that you can use with the meat. The base has magnets on the back, so I just stick it somewhere on the outside of the smoker and carry the remote with me to keep an eye on things. The probes are replaceable and fairly cheap. The “up to 300 feet” range is a bit optimistic, though.
> **[Smoke® Remote BBQ Alarm Thermometer](https://www.thermoworks.com/smoke/)**
>
> Elevate your grilling game ThermoWorks Smoke thermometer. Monitor your BBQ from afar and stay connected with precise temperature updates.
---
### Author:  [@FinsToTheLeft](https://boards.straightdope.com/u/FinsToTheLeft)
#### Post date: [December 31, 2025, 8:28pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/4 "2025-12-31T20:28:01Z")
I have the Meater block with 4 probes and I’m generally disappointed in it. The probes take hours to charge, which means I typically have to plug it in the night before which I seldom remember. The probes aren’t consistent and frequently lose connection to the block.
---
### Author:  [@puzzlegal](https://boards.straightdope.com/u/puzzlegal)
#### Post date: [December 31, 2025, 8:46pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/5 "2025-12-31T20:46:41Z")
I leave mine plugged in. I’ve not had trouble with them losing connection to the block since moving the block next to the oven.
But your use case is how combustion expected you to charge. The “sleeve” has enough charge for a couple of cooks, so you only need to charge it from time to time.
Right now, I’m in my bedroom, but there’s a goose roasting in the oven downstairs. The breast is at 129F, but the stuffing is only at 113F. It’ll be in the oven another hour, probably.
---
### Author:  [@FinsToTheLeft](https://boards.straightdope.com/u/FinsToTheLeft)
#### Post date: [December 31, 2025, 9:17pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/6 "2025-12-31T21:17:17Z")
> [@puzzlegal](#):
>
> I leave mine plugged in. I’ve not had trouble with them losing connection to the block since moving the block next to the oven.
I use mine with my smoker outside, so it’s used less frequently.
---
### Author:  [@puzzlegal](https://boards.straightdope.com/u/puzzlegal)
#### Post date: [December 31, 2025, 10:24pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/7 "2025-12-31T22:24:31Z")
Yeah, i suspect the “best model” varies depending on how you use it, too.
---
### Author:  [@Dewey\_Finn](https://boards.straightdope.com/u/Dewey_Finn)
#### Post date: [December 31, 2025, 11:10pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/8 "2025-12-31T23:10:41Z")
I watch a lot of cooking-related YouTube videos, though I don’t actually cook all that much. One was by a guy involved in developing the Combustion thermometer, mentioned in the OP. It has eight sensors along the length of the probe, so you get the temperature at the surface and interior of the meat. Sounds interesting and if I cooked more (especially meat) I might be interested.
---
### Author:  [@puzzlegal](https://boards.straightdope.com/u/puzzlegal)
#### Post date: [January 1, 2026, 6:38am UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/9 "2026-01-01T06:38:14Z")
His YouTube channel is really good, even though it probably exists to advertise the thermometer.
---
### Author:  [@wguy123](https://boards.straightdope.com/u/wguy123)
#### Post date: [January 1, 2026, 11:32pm UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/10 "2026-01-01T23:32:44Z")
> [@scabpicker](#):
>
> I’ve got an older ThermoWorks dual probe thermometer, the “Smoke”.
I have just been looking for a thermometer set to go with my Kamado grill but I don’t really want to spend hundreds for the latest wireless. $55 for the two probe set looks awesome. It looks like the lid seal will easily accommodate the probe leads and allow me to monitor temps from the house or garage.
Looking forward to learning my grill better. I bought it in the fall and got a short period to try it out and quickly learn to not let the thing heat up too much. It is a good complement to my Weber grill. And I have plenty of fruit wood for smoking (we have a small orchard).
---
### Author:  [@scabpicker](https://boards.straightdope.com/u/scabpicker)
#### Post date: [January 2, 2026, 12:06am UTC](https://boards.straightdope.com/t/wireless-meat-thermometers/1026211/11 "2026-01-02T00:06:46Z")
> [@wguy123](#):
>
> $55 for the two probe set looks awesome.
Glad I could be of help. I’m really mostly in love with it because it’s a design that doesn’t need an app. My father in law gave us some thermometer that requires an app for Christmas. I won’t ever use it because I’m generally against unnecessary phone apps.