# Working with Luan

**URL:** <https://boards.straightdope.com/t/working-with-luan/655913>\
**Category:** Factual Questions\
**Created:** [April 17, 2013, 5:18am UTC](https://boards.straightdope.com/t/working-with-luan/655913 "2013-04-17T05:18:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zebra](https://avatars.discourse-cdn.com/v4/letter/z/c0e974/32.png) [@Zebra](https://boards.straightdope.com/u/Zebra)\
**Post date:** [April 17, 2013, 5:18am UTC](https://boards.straightdope.com/t/working-with-luan/655913/1 "2013-04-17T05:18:28Z")

</div>

I work with Luan a lot. I used a box cutter to cut it. I’d like to use some sort of “power” tool but which one?

Dremel makes some small cutters. Either their rotary, multi-max or saw max may do it or it may tear the Luan to splinters.

Any suggestions on what to use on Luan, other than a box knife?

---

<div class="post-metadata">

**Author:** ![Inner\_Stickler](https://sea3.discourse-cdn.com/straightdope/user_avatar/boards.straightdope.com/inner_stickler/32/318_2.png) [@Inner\_Stickler](https://boards.straightdope.com/u/Inner_Stickler)\
**Post date:** [April 18, 2013, 7:00pm UTC](https://boards.straightdope.com/t/working-with-luan/655913/2 "2013-04-18T19:00:47Z")

</div>

I used to cut it all the time with jig saws, circ saws and sawzalls. If we cared about how it looked, we just painters taped along the cut before we sawed and it was fine.

---

<div class="post-metadata">

**Author:** ![Zebra](https://avatars.discourse-cdn.com/v4/letter/z/c0e974/32.png) [@Zebra](https://boards.straightdope.com/u/Zebra)\
**Post date:** [April 19, 2013, 5:19am UTC](https://boards.straightdope.com/t/working-with-luan/655913/3 "2013-04-19T05:19:51Z")

</div>

Thanks for the tip.

(that’s what she said!)
