Yes this is on a ‘Home inspection Nightmare’ page, but in the comments people say it’s the real deal. And it looks like the lower half ot the wall was made that way.
Left out in the weather, and watered, it eventialy hardens and you can pressure wash off the bags.
I wonder if there is any adhesion between rows? I’m guessing not. I suppose you could drive short pieces of rebar through the bags.
Looks like it would be great for a quick easy retaining wall
Is the lawn going to be regraded up to that level? I’m confused as to what is being retained. If the wall is just sitting on the current ground level and the area behind the wall is backfilled, there’s going to be problems. I suppose he could make it a mechanically stabilized earth wall if he installs some rebar into the wall horizontally, but I’m guessing most people wouldn’t think of that.
If they are really doing this, I’m willing to bet that those bags aren’t just cement; that they have sand and aggregates as well as the cement, and are dry concrete mix. Just add rebar and water.
“Sack-crete” has been used for revetments and headwalls in Mississippi for a long time. It rains so often here that folks sometimes let the rain soak them (rather than applying water). I’ve been under bridges where the pattern of the original bag can be seen on the individual hardened “sacks”.
I found specifications for construction of “bag rip-rap” by doing a Google search, so evidently it is still accepted practice.
I think the attraction is ease of installation. One supposes that laying blocks takes a bit of masonry skill, as opposed to laying sacks one on top of the other.